Di you remove the usb stick before rebooting.
My box arrives tomorrow - Where to start
Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen
-
-
he updated with serial not usb
-
well, after flashing an image, i turn off the receiver on the rear power bottom. if i press on again, after 1 second, the box do nothing, only the red light on the front is on. If i wait around 1 min, then ok, it starts booting.
My question is, is ok this situation or after flashing and turning off on the rear botton (switch on and off) and next on, the box should restart?
Also, when installing the barry allen plugin, it does not formated my usb stick. The usb stick must be on front or rear usb ports?
I can only insert the usb stick after finish the booting?
I have on flash the last original image and inserted the VTI-feed.conf into /etc/ipkg.
I want to try pli image on usb stick via barry allen -
Originally posted by jermaine
well, after flashing an image, i turn off the receiver on the rear power bottom. if i press on again, after 1 second, the box do nothing, only the red light on the front is on. If i wait around 1 min, then ok, it starts booting.
My question is, is ok this situation or after flashing and turning off on the rear botton (switch on and off) and next on, the box should restart? yepp takes some time before you see Bootlogo
TIP: for avoiding problems best is first flash to use lan and serial instaed of USB
Also, when installing the barry allen plugin, it does not formated my usb stick. The usb stick must be on front or rear usb ports? rear is ok is your stick fat formattet?? before you put it in the box
I can only insert the usb stick after finish the booting? No you can put the USB stick in at any time should be reconized by the stb at once
I have on flash the last original image and inserted the VTI-feed.conf into /etc/ipkg.
I want to try pli image on usb stick via barry allen
KEINE FRAGEN PER PN DIESE WERDEN OHNE AUSNAHME GELÖSCHT FRAGEN GEHÖREN INS FORUM
KEINE FRAGEN IM VORSTELLUNGSBEREICH FRAGEN GEHÖREN INS FORUM
Anfänger Tipps die nicht alle im Handbuch stehen##Die wichtigsten Links von Vuplus Support!## QUICK-START-GUIDE für Neuankömmlinge...##Anfängerfragen & Notdienst ##JA / NEIN Fragen für Anfänger ##FAQ
-
yepp takes some time before you see Bootlogo - this some time the front panel is black and only the red light is on? How long to have something on the front panel?
TIP: for avoiding problems best is first flash to use lan and serial instaed of USB[/COLOR] - i allways format with vu util program with serial and lan
rear is ok is your stick fat formattet?? before you put it in the box
i formated it on my pc with fat32
No you can put the USB stick in at any time should be reconized by the stb at once i will try again with the usb stick and after plug in on the receiver i should receive any info by the receiver?
My problem is that after a serial/lan flash, i turn off and on and nothing happens, only if i left off for some minutes, or i do not wait for some time to show something on front panel after switch on the rear bottom -
you need to wait as it starts and screen on box shows as starting so wait it will boot
-
Hello,
Unfortunately the opportunity to know the procedure in case of crash during or after a flash
What should he do? re-flash? by usb but how? Serial and lan?
thanks -
If your box crashes during flash you should try again
first flash should be done by seriel and lan how to
USb flash how to can be found here Flashen per USB Stick
KEINE FRAGEN PER PN DIESE WERDEN OHNE AUSNAHME GELÖSCHT FRAGEN GEHÖREN INS FORUM
KEINE FRAGEN IM VORSTELLUNGSBEREICH FRAGEN GEHÖREN INS FORUM
Anfänger Tipps die nicht alle im Handbuch stehen##Die wichtigsten Links von Vuplus Support!## QUICK-START-GUIDE für Neuankömmlinge...##Anfängerfragen & Notdienst ##JA / NEIN Fragen für Anfänger ##FAQ
-
thanks for answer,
i don't understand why it's so important to do the first flash by serial and lan ?
What is the difference ? -
Originally posted by sfinxx1
thanks for answer,
i don't understand why it's so important to do the first flash by serial and lan ?
What is the difference ?
if you flash usb first time it can come to card reader problem
KEINE FRAGEN PER PN DIESE WERDEN OHNE AUSNAHME GELÖSCHT FRAGEN GEHÖREN INS FORUM
KEINE FRAGEN IM VORSTELLUNGSBEREICH FRAGEN GEHÖREN INS FORUM
Anfänger Tipps die nicht alle im Handbuch stehen##Die wichtigsten Links von Vuplus Support!## QUICK-START-GUIDE für Neuankömmlinge...##Anfängerfragen & Notdienst ##JA / NEIN Fragen für Anfänger ##FAQ
-
then can it be fixed by reflashing by serial ??
-
At this moment i have the original image (3.1) and i installed via serial / lan.
Then installed the VTI-feed.conf into /etc/ipkg.
But i wanted to try pli image. What is better?
Install it by barry allen or the original image is ok to work at 100% ? -
Sorry, i don't understand, witch card reader ? (smartcard reader ?, read of usb stick ?)
Can you explain please, because a lot of personn made it first with usb. and it s ok -
Originally posted by sfinxx1
Sorry, i don't understand, witch card reader ? (smartcard reader ?, read of usb stick ?)
Can you explain please, because a lot of personn made it first with usb. and it s ok
Like i wrote it CAN come to problems with smartcard readers
not read from USB stick but somehow cardreaders not activated after flash over USB that is why we say first time allways seriel and lan
KEINE FRAGEN PER PN DIESE WERDEN OHNE AUSNAHME GELÖSCHT FRAGEN GEHÖREN INS FORUM
KEINE FRAGEN IM VORSTELLUNGSBEREICH FRAGEN GEHÖREN INS FORUM
Anfänger Tipps die nicht alle im Handbuch stehen##Die wichtigsten Links von Vuplus Support!## QUICK-START-GUIDE für Neuankömmlinge...##Anfängerfragen & Notdienst ##JA / NEIN Fragen für Anfänger ##FAQ
-
What you really recommend for the flash? Original image 3.1 and the VTI-feed.conf?
-
Originally posted by jermaine
At this moment i have the original image (3.1) and i installed via serial / lan.
Then installed the VTI-feed.conf into /etc/ipkg.
But i wanted to try pli image. What is better?
Install it by barry allen or the original image is ok to work at 100% ?
that is complete your own choice my friend the original is OK too just what you want and what you need
If you want to test it till the guts i would say every image in the flash first the original then vti then pli then make your decision what is best for you
KEINE FRAGEN PER PN DIESE WERDEN OHNE AUSNAHME GELÖSCHT FRAGEN GEHÖREN INS FORUM
KEINE FRAGEN IM VORSTELLUNGSBEREICH FRAGEN GEHÖREN INS FORUM
Anfänger Tipps die nicht alle im Handbuch stehen##Die wichtigsten Links von Vuplus Support!## QUICK-START-GUIDE für Neuankömmlinge...##Anfängerfragen & Notdienst ##JA / NEIN Fragen für Anfänger ##FAQ
-
Originally posted by jermaine
What you really recommend for the flash? Original image 3.1 and the VTI-feed.conf?
what you expect i recommend i`am VTI team member not running anything els on my box
KEINE FRAGEN PER PN DIESE WERDEN OHNE AUSNAHME GELÖSCHT FRAGEN GEHÖREN INS FORUM
KEINE FRAGEN IM VORSTELLUNGSBEREICH FRAGEN GEHÖREN INS FORUM
Anfänger Tipps die nicht alle im Handbuch stehen##Die wichtigsten Links von Vuplus Support!## QUICK-START-GUIDE für Neuankömmlinge...##Anfängerfragen & Notdienst ##JA / NEIN Fragen für Anfänger ##FAQ
-
Originally posted by stauffie
Originally posted by sfinxx1
Sorry, i don't understand, witch card reader ? (smartcard reader ?, read of usb stick ?)
Can you explain please, because a lot of personn made it first with usb. and it s ok
Like i wrote it CAN come to problems with smartcard readers
not read from USB stick but somehow cardreaders not activated after flash over USB that is why we say first time allways seriel and lan
Thanks for answer -
Originally posted by stauffie
Originally posted by jermaine
At this moment i have the original image (3.1) and i installed via serial / lan.
Then installed the VTI-feed.conf into /etc/ipkg.
But i wanted to try pli image. What is better?
Install it by barry allen or the original image is ok to work at 100% ?
that is complete your own choice my friend the original is OK too just what you want and what you need
If you want to test it till the guts i would say every image in the flash first the original then vti then pli then make your decision what is best for you
thanks for all your support