Box fährt nicht mehr hoch nach Update!

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Box fährt nicht mehr hoch nach Update!

      Hallo zusammen,

      ich habe heute feststellen müssen, dass nach der Installation / Änderung von Plugins automatisch das Modul "ENIGMA" aktualisiert wird. Sobald das passiert ist, bootet die Box nicht mehr! Crashlog hänge ich mal ran.

      Nach einem Neuflash läuft alles. Solange, bis wieder ENIGMA aktualisiert wird. Da scheint ein Fehler im Feed zu sein.

      Spoiler anzeigen

      <?xml version="1.0" encoding="utf-8"?>
      <stbcrashlog>
      <dvbapp2>
      <crashdate>Sun Jun 5 06:04:43 2016</crashdate>
      <compiledate>May 22 2016</compiledate>
      <skin>KravenVB/skin.xml</skin>
      <sourcedate>2016-05-22</sourcedate>
      <branch>vti-master</branch>
      </dvbapp2>
      <image>
      <stbmodel>duo2</stbmodel>
      <kernelcmdline>libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
      <nimsockets>NIM Socket 0:</nimsockets>
      <vtiversion>9.0.3</vtiversion>
      <imageversion>
      <![CDATA[
      version=0901201511171501
      creator=VTi <info@vuplus-support.org>
      url=http://www.vuplus-support.org/
      ]]>
      </imageversion>
      </image>
      <stb-configuration>
      <configuration>
      <![CDATA[
      config.servicelist.startup_path=1:7:1:0:0:0:0:0:0:0:(type == 1) || (type == 17) || (type == 22) || (type == 25) || (type == 134) || (type == 195) ORDER BY name;
      config.EMC.movie_trashcan_enable=false
      config.EMC.CoolStartHome=true
      config.EMC.mark_latest_files=false
      config.EMC.movie_watching_percent=30
      config.EMC.latest_recordings=false
      config.EMC.symlinks_show=false
      config.EMC.bookmarks=EMC
      config.EMC.movie_pathlimit=.
      config.av.downmix_aac=false
      config.av.policy_43=scale
      config.av.defaultac3=true
      config.av.videomode.DVI=1080p
      config.av.surround_3d=spdif
      config.av.videorate.1080i=multi
      config.av.downmix_ac3=false
      config.av.videoport=DVI
      config.misc.languageselected=false
      config.misc.defaultchosen=false
      config.misc.firstrun=false
      config.misc.initialchannelselection=false
      config.misc.startCounter=1305
      config.misc.videowizardenabled=false
      config.usage.on_movie_stop=movielist
      config.usage.blinking_display_clock_during_recording=true
      config.usage.allowed_timeshift_paths=['/media/hdd/']
      config.usage.zap_pip=false
      config.usage.silent_rec_mode=false
      config.usage.show_event_progress_in_servicelist=true
      config.usage.on_movie_eof=quit
      config.usage.check_for_updates=0
      config.usage.use_pig=true
      config.usage.rec_button_long=event_record
      config.usage.movielist_last_played_movie=1:0:0:0:0:0:0:0:0:0:/hdd/movie/20160221 0245 - VOX HD - Der Mandant.ts
      config.usage.infobar_timeout=7
      config.usage.hdd_standby=600
      config.usage.timerlist_finished_timer_position=end
      config.usage.show_notification_for_updates=false
      config.lcd.standby=4
      config.lcd.bright=10
      config.plugins.vtipanel.configurationbackup.backupdirs=['/etc/CCcam.cfg', '/etc/default_gw', '/etc/enigma2/', '/etc/hostname', '/etc/network/interfaces', '/etc/resolv.conf', '/etc/wpa_supplicant.conf']
      config.plugins.FritzCall.username=admin
      config.plugins.FritzCall.filter=true
      config.plugins.FritzCall.enable=true
      config.plugins.FritzCall.fritzphonebook=true
      config.plugins.FritzCall.fwVersion=06.35
      config.plugins.FritzCall.timeout=7
      config.plugins.FritzCall.reloadPhonebookTime=23
      config.plugins.FritzCall.password=75grmbl99
      config.plugins.FritzCall.filtermsn=373357
      config.plugins.MetrixUpdater.UpdateAvailable=0
      config.plugins.MetrixUpdater.Reboot=0
      config.plugins.MetrixUpdater.Revision=1000
      config.plugins.MetrixWeather.forecastTodayCode=H
      config.plugins.MetrixWeather.forecastTomorrowTempMax=6
      config.plugins.MetrixWeather.forecastTomorrowText=Cloudy
      config.plugins.MetrixWeather.currentWeatherTemp=6
      config.plugins.MetrixWeather.forecastTomorrowCode=N
      config.plugins.MetrixWeather.woeid=698014
      config.plugins.MetrixWeather.currentWeatherCode=H
      config.plugins.MetrixWeather.currentWeatherText=Mostly Cloudy
      config.plugins.MetrixWeather.forecastTomorrowTempMin=3
      config.plugins.MetrixWeather.forecastTodayTempMin=2
      config.plugins.MetrixWeather.forecastTodayText=AM Clouds/PM Sun
      config.plugins.MetrixWeather.refreshInterval=10
      config.plugins.MetrixWeather.forecastTodayTempMax=8
      config.plugins.MetrixWeather.currentLocation=Stuhr
      config.plugins.epgsearch.history_length=10
      config.plugins.skyrecorder.guide_days_to_scan=5
      config.plugins.skyrecorder.margin_after=10
      config.plugins.skyrecorder.database_update_time=9:0
      config.plugins.skyrecorder.anytimefolder=/media/hdd/movie/SkyRecorder/
      config.plugins.skyrecorder.autoupdate_database=true
      config.plugins.skyrecorder.auto_recordtimer_entries=true
      config.plugins.skyrecorder.lastchecked=1465023605
      config.plugins.skyrecorder.margin_before=1
      config.plugins.skyrecorder.next_update=1465110000
      config.plugins.skyrecorder.silent_timer_mode=true
      config.plugins.SecondInfoBar.HideNormalIB=true
      config.plugins.SecondInfoBar.TimeOut=0
      config.plugins.epgrefresh.delay_standby=5
      config.plugins.epgrefresh.interval=2
      config.plugins.epgrefresh.end=1:30
      config.plugins.epgrefresh.enablemessage=false
      config.plugins.epgrefresh.lastscan=1416184533
      config.plugins.epgrefresh.begin=1:5
      config.plugins.epgrefresh.show_help=false
      config.plugins.epgrefresh.interval_seconds=1800
      config.plugins.elektro.enable=true
      config.plugins.elektro.ip.0=192.168.1.233
      config.plugins.elektro.nextwakeup=0
      config.plugins.elektro.sleep.1=1:0
      config.plugins.elektro.sleep.0=1:0
      config.plugins.elektro.sleep.3=1:0
      config.plugins.elektro.sleep.2=1:0
      config.plugins.elektro.sleep.5=1:0
      config.plugins.elektro.sleep.4=1:0
      config.plugins.elektro.sleep.6=1:0
      config.plugins.elektro.standbyOnBootTimeout=10
      config.plugins.elektro.deepstandby_wakeup_time=1394694017
      config.plugins.elektro.wakeup.1=8:0
      config.plugins.elektro.wakeup.0=8:0
      config.plugins.elektro.wakeup.3=8:0
      config.plugins.elektro.wakeup.2=8:0
      config.plugins.elektro.wakeup.5=8:0
      config.plugins.elektro.wakeup.4=8:0
      config.plugins.elektro.wakeup.6=8:0
      config.plugins.elektro.NASport=23
      config.plugins.elektro.standbyOnBoot=true
      config.plugins.elektro.hddsleep=true
      config.plugins.elektro.standbyOnManualBoot=false
      config.plugins.KravenVB.InfobarStyle=infobar-style-x1
      config.plugins.KravenVB.weather_server=_realtek
      config.plugins.KravenVB.SIB=sib5
      config.plugins.KravenVB.ChannelSelectionStyle=channelselection-style-xpicon
      config.plugins.KravenVB.EMCStyle=emc-smallcover2
      config.plugins.KravenVB.Progress=00E51400
      config.plugins.KravenVB.weather_accu_latlon=lat=53.04999924&lon=8.80000019&metric=1&language=de
      config.plugins.KravenVB.MovieSelection=movieselection-small-cover
      config.plugins.KravenVB.ChannelSelectionStyle2=channelselection-style-xpicon
      config.plugins.KravenVB.weather_owm_latlon=lat=53.04999924&lon=8.80000019&units=metric&lang=de
      config.plugins.KravenVB.weather_accu_id=167941
      config.plugins.KravenVB.Volume=volume-original
      config.plugins.KravenVB.InfobarColorTrans=18
      config.plugins.KravenVB.WeatherView=icon
      config.plugins.KravenVB.weather_city=641142
      config.plugins.KravenVB.WeatherStyle=weather-big
      config.plugins.KravenVB.BackgroundColor=000000
      config.plugins.KravenVB.weather_foundcity=Bremen
      config.plugins.KravenVB.weather_realtek_latlon=lat=53.04999924&lon=8.80000019&metric=1&language=de
      config.plugins.KravenVB.InfobarColor=000000
      config.plugins.KravenVB.refreshInterval=240
      config.plugins.KravenVB.NumberZapExt=numberzapext-xpicon
      config.plugins.autotimer.maxdaysinfuture=7
      config.plugins.autotimer.delay=3
      config.plugins.autotimer.autopoll=true
      config.plugins.autotimer.timeout=1
      config.plugins.autotimer.interval=8
      config.plugins.autotimer.show_help=false
      config.plugins.MetrixConnect.PIN=0
      config.plugins.serienRec.timeUpdate=true
      config.plugins.serienRec.margin_after=10
      config.plugins.serienRec.autochecktype=1
      config.plugins.serienRec.seasonsubdir=true
      config.plugins.serienRec.ActionOnNew=4
      config.plugins.serienRec.deltime=8:1
      config.plugins.serienRec.checkfordays=5
      config.plugins.serienRec.planerCacheSize=4
      config.plugins.serienRec.savetopath=/media/hdd/movie/Serien/
      config.plugins.serienRec.tuner=2
      config.plugins.serienRec.margin_before=1
      config.plugins.serienRec.setupType=1
      config.plugins.serienRec.seriensubdir=true
      config.plugins.Webinterface.http.port=80
      config.plugins.QuickButton.backupdirs=['/etc/']
      config.plugins.MyMetrix.Color.BackgroundTransparency=40
      config.plugins.MyMetrix.Color.Accent2_Custom=153,255,153
      config.plugins.MyMetrix.Color.BackgroundTextTransparency=160
      config.plugins.MyMetrix.Color.Accent1=#00ffffff
      config.plugins.MyMetrix.Color.Accent2=CUSTOM
      config.plugins.MyMetrix.Color.Background2=#0000236b
      config.plugins.MyMetrix.Color.Background2_Custom=0,50,255
      config.plugins.MyMetrix.Color.Background_Custom=0,50,255
      config.plugins.MyMetrix.Color.ProgressBar=#00E51400
      config.plugins.MyMetrix.showFirstRun=0
      config.plugins.pvmc.showwizard=false
      config.plugins.pvmc.checkforupdate=Active
      config.plugins.pvmc.autostart=false
      config.plugins.pvmc.plugins.sqlitecheck.nextcheck=-1
      config.plugins.AtileHD.refreshInterval=10
      config.plugins.AtileHD.woeid=638242
      config.Nims.1.diseqcMode=single
      config.Nims.1.configMode=simple
      config.Nims.0.diseqcMode=single
      config.Nims.0.configMode=simple
      config.seek.selfdefined_46=60
      config.seek.selfdefined_13=15
      config.seek.selfdefined_79=300
      config.mediaportal.showyouporn=true
      config.mediaportal.showeporner=true
      config.mediaportal.showserienbz=true
      config.mediaportal.showamateurporn=true
      config.mediaportal.ansicht=liste
      config.mediaportal.showKinoKiste=true
      config.mediaportal.acceptdata=true
      config.mediaportal.showStreamOase=true
      config.mediaportal.serienbz=true
      config.mediaportal.use_hls_proxy=true
      config.mediaportal.showseriesever=true
      config.mediaportal.skin=weed_EvoAero
      config.mediaportal.youtubeprio=2
      config.mediaportal.showmyvideoalleserien=true
      config.mediaportal.showamateurslust=true
      config.mediaportal.useRtmpDump=true
      config.mediaportal.showKinox=true
      config.mediaportal.autoplayThreshold=10
      config.mediaportal.showDdlme=true
      config.mediaportal.showhqporner=true
      config.mediaportal.showpornhub=true
      config.mediaportal.showthenewporn=true
      config.mediaportal.videoquali_others=2
      config.mediaportal.showhdporn=true
      config.mediaportal.showKinoLeak=true
      config.mediaportal.showmlehd=true
      config.mediaportal.showxhamster=true
      config.mediaportal.showwetplace=true
      config.mediaportal.showEighties=true
      config.mediaportal.showM4kPorn=true
      config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.dbe03.tv" ORDER BY bouquet;
      config.tv.lastservice=1:0:19:EF74:3F9:1:C00000:0:0:0:
      config.OpenWebif.https_enabled=true
      config.OpenWebif.enabled=false
      config.osd.language=de_DE
      config.ParentalControl.retries.setuppin.time=1464108127
      config.recording.margin_before=5
      config.recording.margin_after=20
      config.skin.primary_skin=KravenVB/skin.xml
      config.skin.primary_vfdskin=vfd_skin/skin_vfd_thm.xml
      config.audio.volume=100
      config.movielist.first_tags=VSR-12
      config.movielist.start_videodir=/hdd/movie/
      config.movielist.moviedirs_config={'/hdd/movie/': {'list': 3}, '/hdd/movie/Doctor Who/Staffel 9/': {'list': 2}, '/media/hdd/movie/': {'list': 3}, '/media/hdd/movie/Serien/The Blacklist/Season 3/': {'list': 2}, '/hdd/movie/dm7025/': {'list': 3}, '/hdd/movie/007/': {'list': 2}, '/media/net/autofs/Archiv/Star Wars/': {'sort': 1, 'list': 3}}
      config.movielist.last_timer_videodir=/hdd/Doctor Who/Staffel 9/
      config.movielist.videodirs=['/hdd/Doctor Who/', '/hdd/Doctor Who/Staffel 8/', '/hdd/Doctor Who/Staffel 9/', '/hdd/movie/', '/hdd/movie/007/', '/hdd/movie/Doctor Who/Staffel 8/', '/hdd/movie/Dokumentationen/', '/hdd/movie/Game of Thrones/', '/hdd/movie/Serien/Jane Doe/', '/hdd/movie/Serien/Star Wars/', '/hdd/movie/Serien/The Blacklist/', '/hdd/movie/Serien/The Blacklist/Season 3/', '/hdd/movie/k/']
      config.movielist.last_videodir=/hdd/movie/Serien/The Blacklist/Season 3/
      config.movielist.second_tags=VSR-16
      config.movielist.listtype=3
      ]]>
      </configuration>
      </stb-configuration>
      <software>
      <dvbapp2software>
      <![CDATA[
      enigma2 - vti-9.0.3-20160522-r0
      enigma2-data-enigma2 - vti-9.0.1-20151117-r0
      enigma2-data-fonts - vti-9.0.1-20151117-r0
      enigma2-data-keymaps - vti-9.0.1-20151117-r0
      enigma2-data-meta - vti-9.0.1-20151117-r0
      enigma2-data-spinner - vti-9.0.1-20151117-r0
      enigma2-data-xml - vti-9.0.3-20160522-r0
      enigma2-defaultservices - 1.0-r8-vti03
      enigma2-locale-ar - vti-9.0.1-20151117-r0
      enigma2-locale-ca - vti-9.0.1-20151117-r0
      enigma2-locale-cs - vti-9.0.1-20151128-r0
      enigma2-locale-da - vti-9.0.1-20151117-r0
      enigma2-locale-de - vti-9.0.3-20160522-r0
      enigma2-locale-el - vti-9.0.1-20151117-r0
      enigma2-locale-en - vti-9.0.1-20151117-r0
      enigma2-locale-es - vti-9.0.1-20151117-r0
      enigma2-locale-et - vti-9.0.1-20151117-r0
      enigma2-locale-fi - vti-9.0.1-20151117-r0
      enigma2-locale-fr - vti-9.0.3-20160516-r0
      enigma2-locale-fy - vti-9.0.1-20151117-r0
      enigma2-locale-hr - vti-9.0.1-20151117-r0
      enigma2-locale-hu - vti-9.0.1-20151117-r0
      enigma2-locale-is - vti-9.0.1-20151117-r0
      enigma2-locale-it - vti-9.0.1-20151117-r0
      enigma2-locale-lt - vti-9.0.3-20160516-r0
      enigma2-locale-lv - vti-9.0.1-20151117-r0
      enigma2-locale-nl - vti-9.0.1-20151117-r0
      enigma2-locale-no - vti-9.0.1-20151117-r0
      enigma2-locale-pl - vti-9.0.3-20160516-r0
      enigma2-locale-pt - vti-9.0.1-20151117-r0
      enigma2-locale-ru - vti-9.0.1-20151117-r0
      enigma2-locale-sk - vti-9.0.1-20151117-r0
      enigma2-locale-sl - vti-9.0.1-20151117-r0
      enigma2-locale-sr - vti-9.0.1-20151117-r0
      enigma2-locale-sv - vti-9.0.1-20151117-r0
      enigma2-locale-tr - vti-9.0.1-20151117-r0
      enigma2-locale-uk - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-addstreamurl - 1.0-e2openpluginsgit20120411-r0
      enigma2-plugin-extensions-atilehd - 3.1-r0
      enigma2-plugin-extensions-autotimer - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-cdinfo - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-dlnabrowser - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-dlnaserver - vti-9.0.0-20151029-r0
      enigma2-plugin-extensions-dvdplayer - vti-9.0.3-20160516-r0
      enigma2-plugin-extensions-elektro - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-epgrefresh - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-epgsearch - vti-9.0.2-20160211-r0
      enigma2-plugin-extensions-fritzcall - vti-9.0.3-20160513-r0
      enigma2-plugin-extensions-graphmultiepg - vti-9.0.2-20160110-r0
      enigma2-plugin-extensions-hbbtv - vti-9.0.2-20160120-r0
      enigma2-plugin-extensions-lcd4linux - 4.7-r3.vtir0
      enigma2-plugin-extensions-mediainfo - 2.8-r0
      enigma2-plugin-extensions-mediaplayer - vti-9.0.3-20160516-r0
      enigma2-plugin-extensions-mediaportal - 7.5.0
      enigma2-plugin-extensions-mediascanner - vti-9.0.3-20160516-r0
      enigma2-plugin-extensions-multiquickbutton-vu - 2.7.15-r2
      enigma2-plugin-extensions-openwebif - 0.4.7-e2openpluginsgit20160518-r0-1398+bca0ef7
      enigma2-plugin-extensions-piconmanager - 2.2-20150329-r2
      enigma2-plugin-extensions-pictureplayer - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-remotechannelstreamconverter - 1.0-e2openpluginsgit20151009-r0
      enigma2-plugin-extensions-satipclient - vti-9.0.2-20160211-r0
      enigma2-plugin-extensions-secondinfobar - 2.8-r2
      enigma2-plugin-extensions-serienrecorder - 3.2.6
      enigma2-plugin-extensions-skyrecorder - 1.2.3
      enigma2-plugin-extensions-streamtv - vti-9.0.1-20151117-r0
      enigma2-plugin-extensions-webbouqueteditor - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-webinterface - vti-9.0.0-20151024-r0
      enigma2-plugin-extensions-xbmc - 1.0-20150506.0_beta_r0
      enigma2-plugin-picons-vti.default - 1.2-20151023-r0
      enigma2-plugin-skin-750s - vti-9.0.1-20151012-r0
      enigma2-plugin-skin-atile - 4.5-r0
      enigma2-plugin-skin-beautyfhd - 2.62
      enigma2-plugin-skin-dreammm-hd - vti-9.0.0-20151012-r0
      enigma2-plugin-skin-kravenvb - 4.6.0
      enigma2-plugin-skin-mutespectator - 3.2-r0
      enigma2-plugin-skin-stylefhd - 2016-05-23-r0
      enigma2-plugin-systemplugins-3gmodemmanager - vti-9.0.0-20151024-r0
      enigma2-plugin-systemplugins-animationsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-autoframerate - 0.6-r0
      enigma2-plugin-systemplugins-autoresolution - vti-9.0.2-20160215-r0
      enigma2-plugin-systemplugins-autoshutdown - 0.6-r10
      enigma2-plugin-systemplugins-blindscan - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-commoninterfaceassignment - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-devicemanager2 - 1.8-r0
      enigma2-plugin-systemplugins-firmwareupgrade - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-hdmicec - 1.2-r9
      enigma2-plugin-systemplugins-hotplug - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-manualfancontrol - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-mphelp - vti-9.0.0-20151024-r0
      enigma2-plugin-systemplugins-networkbrowser - vti-9.0.0-20151024-r0
      enigma2-plugin-systemplugins-networkwizard - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-remotecontrolcode - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-skinselector - vti-9.0.3-20160516-r0
      enigma2-plugin-systemplugins-toolkit - vti-9.0.1-20151110-r0
      enigma2-plugin-systemplugins-transcodingsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-ui3dsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-uipositionsetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-vfdskinselector - 1.9-r0
      enigma2-plugin-systemplugins-videoenhancement - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-videomode - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-videotune - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-wirelessaccesspoint - vti-9.0.0-20151024-r0
      enigma2-plugin-systemplugins-wirelesslan - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-wirelesslansetup - vti-9.0.1-20151117-r0
      enigma2-plugin-systemplugins-wolsetup - vti-9.0.0-20151024-r0
      enigma2-plugin-systemplugins-zappingmodeselection - vti-9.0.1-20151117-r0
      enigma2-plugins-meta - vti-9.0.1-20151110-r0
      enigma2-python - vti-9.0.3-20160523-r0
      enigma2-skins-meta - vti-9.0.1-20151012-r0
      enigma2-streamproxy - 1.0+git15+37a3f19-r5
      enigma2-transtreamproxy - 2.0-r11-vti03+git38+7675a1e-r11-vti03
      packagegroup-vuplus-enigma2 - 1.0-r8-vti06
      ]]>
      </dvbapp2software>
      <gstreamersoftware>
      <![CDATA[
      gstreamer1.0 - 1.4.5-r0
      gstreamer1.0-libav - 1.4.5-r0-vti001
      gstreamer1.0-plugin-dvbmediasink - 1.0+git63+e839734-r5-vti008
      gstreamer1.0-plugin-subsink - 1.0+git6+0437b39-r0
      gstreamer1.0-plugins-bad - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-faad - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-fragmented - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-mms - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-mpegpsdemux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-mpegtsdemux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-rtmp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-bad-videoparsersbad - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-alsa - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-app - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-audioconvert - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-audioresample - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-ogg - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-playback - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-subparse - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-typefindfunctions - 1.4.5-r0-vti00
      gstreamer1.0-plugins-base-vorbis - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-apetag - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-audioparsers - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-autodetect - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-avi - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-flac - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-flv - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-icydemux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-id3demux - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-isomp4 - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-matroska - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-rtp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-rtpmanager - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-rtsp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-souphttpsrc - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-udp - 1.4.5-r0-vti00
      gstreamer1.0-plugins-good-wavparse - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-amrnb - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-amrwbdec - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-asf - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-cdio - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-dvdsub - 1.4.5-r0-vti00
      gstreamer1.0-plugins-ugly-mad - 1.4.5-r0-vti00
      libgstapp-1.0-0 - 1.4.5-r0-vti00
      libgstaudio-1.0-0 - 1.4.5-r0-vti00
      libgstcodecparsers-1.0-0 - 1.4.5-r0-vti00
      libgstmpegts-1.0-0 - 1.4.5-r0-vti00
      libgstpbutils-1.0-0 - 1.4.5-r0-vti00
      libgstriff-1.0-0 - 1.4.5-r0-vti00
      libgstrtp-1.0-0 - 1.4.5-r0-vti00
      libgstrtsp-1.0-0 - 1.4.5-r0-vti00
      libgstsdp-1.0-0 - 1.4.5-r0-vti00
      libgsttag-1.0-0 - 1.4.5-r0-vti00
      libgsturidownloader-1.0-0 - 1.4.5-r0-vti00
      libgstvideo-1.0-0 - 1.4.5-r0-vti00
      ]]>
      </gstreamersoftware>
      </software>
      <crashlogs>
      <dvbapp2crashlog>
      <![CDATA[
      mportExternalModules] Imported external module: EPGRefresh
      [HTTPRootResource}.__init__
      [Webinterface] started on 0.0.0.0:80 auth=False ssl=False
      [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      [HTTPRootResource}.__init__
      [Webinterface] started on 0.0.0.0:443 auth=True ssl=True
      [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      [eEPGCache] disable Vu+ DVB EPG blacklist mode
      [eEPGCache] set Vu+ in EPG-server (default) mode
      [eEPGCache] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      [eEPGCache] time updated.. start EPG Mainloop
      before: 1
      after: 1
      not showing fine-tuning wizard, config variable doesn't exist
      showtestcard is false
      Looking for embedded skin
      [eEPGCache] create epg.dat backup
      setValue 100
      Setvolume: 100 100 (raw)
      Setvolume: 0 0 (-1db)
      Setvolume: 100 100 (raw)
      Setvolume: 0 0 (-1db)
      [eEPGCache] 16217 events read from /hdd/epg.dat
      [eEPGCache] create real epg.dat backup
      warning, skin is missing element etitle in <class 'Screens.ChannelSelection.ChannelSelection'>
      KravenWeather: Weather download from RealTek
      RemovePopup, id = ZapError
      main thread is non-idle! display spinner!
      [Animation] set animation mode 1
      playing service..
      not pauseable.
      RemovePopup, id = ZapError
      allocate channel.. 03f9:0001
      opening frontend 0
      [eDVBCAService] new channel 0x1757ad8!
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      allocate Channel: res 0
      FIXME: request for unknown slot
      allocate demux
      resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
      resolve: -> /etc/scan_tp_valid_check.py
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      [SEC] setVoltage 2
      [SEC] sleep 10ms
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      cidr invalid: 64
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      set sequence pos 3
      Timeout!
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      child has terminated
      pipes closed
      child has terminated
      pipes closed
      0.0.0.0
      169.254
      192.168
      nameservers: [[192, 168, 1, 9]]
      read configured interface: {'lo': {'dhcp': False}, 'ra0': {'dhcp': True}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 9], 'address': [192, 168, 1, 90]}}
      self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'dns-nameservers': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 1, 90], 'up': True, 'dns-nameservers': '\tdns-nameservers 192.168.1.9\n', 'mac': '00:1d:ec:05:8f:ef', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 1, 9]}}
      [HTTPRootResource].isSessionValid :: created session with id '0' for client with token '5576ae6f7c18f7c236e583dc3265d98b8a6117a2'
      screen cleanup!
      screen cleanup!
      ServiceList handle command
      screen cleanup!
      screen cleanup!
      screen cleanup!
      screen cleanup!
      ServiceList handle command
      screen cleanup!
      [SEC] set dynamic current limiting
      Timeout!
      child has terminated
      pipes closed
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      child has terminated
      pipes closed
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      [Elektro] Profile: 1
      [Elektro] Nextday: 07:00:00
      [Elektro] Current time: 06:03:00
      [Elektro] Wakeup time: 08:00:00
      [Elektro] Sleep time: 01:00:00
      [Elektro] Sleep: 64800 < 82980
      [93m[SerienRecorder] AutoCheck Clock-Timer gestartet.[0m
      [93m[SerienRecorder] Verbleibende Zeit: 2:13 Stunden[0m
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> InfobarMenuActions mainMenu
      loading mainmenu XML...
      Subtitles Subtitles
      TimerEdit TimerEditList
      PluginBrowser PluginBrowser
      action -> WizardActions up
      action -> WizardActions up
      action -> WizardActions ok
      unknown action WizardActions/ok! typo in keymap?
      action -> OkCancelActions ok
      Ci CiSelection
      ParentalControlSetup ParentalControlSetup
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> WizardActions down
      action -> WizardActions down
      action -> WizardActions ok
      unknown action WizardActions/ok! typo in keymap?
      action -> OkCancelActions ok
      action -> OkCancelActions cancel
      action -> WizardActions down
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      action -> WizardActions ok
      unknown action WizardActions/ok! typo in keymap?
      action -> OkCancelActions ok
      [CI_Wizzard] FOUND 2 CI Slots
      [SEC] set dynamic current limiting
      next real activation is Mon Jun 6 20:58:40 2016
      action -> ColorActions green
      [CI_Wizzard] selected CI Slot : 0
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      [CI_Wizzard_Config] Configuring CI Slots : 0
      []
      [CI_Wizzard_Config_CI0] read following CAIds from CI: []
      ci 0
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> ColorActions blue
      OURSTATE: lost lock, trying to retune
      (0)tune
      RotorCmd ffffffff, lastRotorCmd ffffffff
      prepare_sat System 1 Freq 11464250 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0
      tuning to 1714 mhz
      OURSTATE: tuning
      [SEC] set static current limiting
      [SEC] invalidate current switch params
      set sequence pos 3
      set sequence pos 3
      [SEC] update current switch params
      [SEC] startTuneTimeout 5000
      [SEC] setFrontend 1
      setting frontend 0
      [SEC] sleep 500ms
      (0)fe event: status 0, inversion off, m_tuning 1
      [SEC] set dynamic current limiting
      action -> SetupActions ok
      Traceback (most recent call last):
      File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
      res = self.actions[action]()
      File "/usr/lib/enigma2/python/Components/SelectionList.py", line 33, in toggleSelection
      item = self.list[idx][0]
      IndexError: list index out of range
      (PyObject_CallObject(<bound method ActionMap.action of <Components.ActionMap.ActionMap instance at 0x55aa6120>>,('SetupActions', 'ok')) failed)
      ]]>
      </dvbapp2crashlog>
      </crashlogs>
      </stbcrashlog>

    • Habe ich. Ich flashe neu, lasse alles auf Standard und installiere einfach irgendein Plugin. Z.B. elektro. Dann sehe ich, elektro und ENIGMA werden installiert. Und das wars dann auch: GUI oder Box restart gehen ab dann nicht mehr.

      Egal, welches Plugin man installiert, es kommt immer ENIGMA (groß geschrieben) mit.

    • So sieht das dann aus:

      Quellcode

      1. root@vuduo2:/var/lib/opkg# opkg install enigma2-plugin-extensions-elektro
      2. Installing enigma2-plugin-extensions-elektro (vti-9.0.0-20151024-r0) on root.
      3. Downloading: enigma2-plugin-extensions-elektro_vti-9.0.0-20151024-r0_vuduo2.ipk
      4. Upgrading enigma2 from vti-9.0.3-20160517-r1 to vti-9.0.3-20160603-r1 on root.
      5. Downloading: enigma2_vti-9.0.3-20160603-r1_vuduo2.ipk
      6. Configuring enigma2.
      7. Configuring enigma2-plugin-extensions-elektro.
      8. root@vuduo2:/var/lib/opkg#
      Da installiert er auch gleich enigma2 mit und damit habe ich dann das Problem!

      Edit: Oha. Hatte noch eine Idee. Scheinbar sind die dependencies nicht so korrekt. Habe mit dem opkg upgrade es dann hinbekommen, dass die Kiste bootet. Scheinbar braucht er dann nämlich auch das enigma2-data Paket.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von nick6422 () aus folgendem Grund: Ergänzung

    • Gleiches Verhalten auch bei mir. Wollte mal eben schnell auf 9.0.3 updaten und sobald ich irgendein Plugin installiere bootet die box nicht mehr. Habe es jetzt beim Flashen mit allen möglichen Einstellungen probiert, immer das gleiche Ergebnis.
      @Duc: wie hast Du es jetzt hinbekommen? Plugins nur per telnet installieren?

    • Jetzt habe ich das Problem auch gehabt.
      Vom Feed das audiosync Plugin installiert.... danach lief erst mal alles scheinbar normal, bis ich einen Reboot machen musste.
      Dann hing die VU+Duo² :-(, und zwar an der Stelle, wo normalerweise im Bild links oben der dreifarbige, kurze "Fortschrittsbalken" erscheinen sollte.

      Erst neues Flashen hat die Box wieder zum Leben erweckt.

      Problem ist hier Reproduzierbar.

    • Bei mir genauso - hier commoninterfaceassignment installiert, dabei scheinbar auch enigma-Update, Neustart, Box hängt...

      Scheint ja aber nicht so zu interessieren...

    • Scheint aber nicht bei allen Plugins zu sein. MovieCut und MovieTitle haben nicht so rumgezickt...

      Scheint ja aber nicht so zu interessieren...

      Für mich ist das ein schwerwiegender Fehler. Ich überlege echt, ob ich nicht auf die 8.2. zurück soll....

      @tantalos: Wie "debug log" ?
      Dein "opkg update && opkg upgrade" vor dem Installieren via telnet ausführen ?

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von jeff_jordan () aus folgendem Grund: nachtrag...

    • @tantalos:
      Doch, dass wundert mich.
      Weil ich nicht der einzige mit diesem Fehler bin, sondern man etliche Benutzer findet.
      Und das ist in der Tat ein schwerwiegender Fehler - ein einfaches Installieren einer Erweiterung führt dazu, dass die Box nicht mehr startet. Da kann man doch ein wenig Interesse der Entwickler erwarten.
      Und es ist ja nicht so, dass keine weiteren Infos mitgeteilt wurden.
      In einem anderen Thread (CI+ Modul,was geht, was geht nicht) habe ich schon gesagt, dass man per telnet noch auf die Box kommt. Crashlog hatte ich keins. Starten von enigma brachte die folgenden Meldungen:
      Spoiler anzeigen
      PYTHONPATH: /usr/lib/enigma2/python
      [VTi] change debug mode --> console: 0
      [VTi] change debug mode --> file: 0
      [glClass] Selected config: R=8 G=8 B=8 A=8 Depth=24 Stencil=0
      [glClass] ANIMATION #6 selected
      executing main
      Traceback (most recent call last):
      File "/usr/lib/enigma2/python/mytest.py", line 3, in <module>
      import enigma
      File "/usr/lib/enigma2/python/enigma.py", line 1789, in <module>
      eListboxServiceContent.setRECServiceFunction = new_instancemethod(_enigma.eListboxServiceContent_setRECServiceFunction,None,eListboxServiceContent)
      AttributeError: 'module' object has no attribute 'eListboxServiceContent_setRECServiceFunction'


      Was macht das "opkg update && opkg upgrade"? Hab ich zugegebenermaßen noch nicht probiert...

      Was soll das machen, was nicht automatisch passiert? Ah, OK, lese gerade, die Dependencies sind vielleicht nicht korrekt.
      Werde ich gerne mal versuchen - nur zwischendurch brauch ich auch mal eine funktionierende Box...

    • Also ich habs gerade probiert mit opkg update && opkg upgrade. Box hängt bei mir bei der Handschuh Frau. Neuflashen funktioniert. Gui-Neustart auch. Kippschalter aus/an -> bleibt beim booten stehen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Skatehouse ()

    • Du kannst mehrere Sachen versuchen:

      1) längeres Drücken der Power Taste, dann sollte die VU booten. Oder ...
      2) per Telnet mit "init 4 && init3" versuichen E2 neu zu starten oder
      3) per Telnet mit "reboot" neustarten

      Kippschalter sollte immer die letzte Möglichkeit sein ...
      - - - Beitrag wurde mit Deppentalk erstellt. - - -