CutListEditor - Reloaded

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • CutListEditor - Reloaded

      Die anhängende Version des CutListEditors erfüllt mittlerweile meine Anforderungen an ein Schnittwerkzeug, benötigt aber nun einen Betatester, um noch eventuelle Fehler auszumerzen. Hätte jemand Lust, zu testen?

      Umgesetzte Änderungen:

      1. - Beim Start werden Sprungmarken (MARK+LAST) gelöscht.
      Übersichtlicher, es erscheinen nur noch bereits eingegebene Schnittmarken (IN+OUT).

      2. - Es gibt nur noch die Schnittart "Schnittmarke setzen/löschen".
      Damit entfallen "Schnittanfang hier", "Schnittende hier", "Vor Position entfernen", "Nach Position entfernen". Die erste Markierung ist immer "IN", davor wird weggeschnitten. Schnittmarken werden abwechselnd auf "IN" und "OUT" gesetzt; jeweils nach "IN" wird der Film angezeigt, nach "OUT" weggeschnitten.

      3. - Jede neue Schnittmarke erscheint sofort in der Schnittliste (bisher nur IN/OUT-Paare). Jede Schnittmarke kann einzeln gelöscht werden.

      4. - Neue Funktion "Schnittmarke verschieben": Die in der Schnittliste gewählte Marke wird auf die aktuelle Position gesetzt. Ideal für kleinere Justierungen.

      5. - Neue Funktion "Verschiebung zurück": Stellt den Zustand vor "Schnittmarke verschieben" wieder her (Undo).

      6. - Der Aufruf von MovieCut ist integriert: Mit Taste "2" werden die Schnitte im Hintergrund durchgeführt.
      MovieCut muss vorher vom Feed installiert sein. Die geschnittene Datei hat den Endung "cut". Eine vorhandene geschnittene Datei wird überschrieben.

      7. - Beim Beenden werden die Schnittmarken (IN) zu Sprungmarken (MARK) kopiert.
      Damit läßt sich die Qualität der Schnitte leicht im Viewer (z.B. EMC) prüfen.

      8. - Die Steuerung ist sehr einfach ohne Menu möglich:

      0 : Schnitt setzen / löschen
      2 : Schnitte im Hintergrund durchführen = Aufruf von MovieCut
      1 / 3 : 5 Sekunden zurück/vor
      4 / 6 : 20 Sekunden zurück/vor
      7 / 9 : 90 Sekunden zurück/vor
      < > (Steuerkreuz): 1 Bild zurück / vor. Falls aktuelle Position == Schnitt, wird der Schnitt verschoben -> einfache Korrektur
      < > (links/rechts der 0): 1 Schnitt zurück / vor
      gelb : Start / Stop

      Installation:
      - Eine eventuell vorhandene Version des CutListEditors deinstallieren (kann man sich notfalls vom Feed wieder holen)
      - Die anhängende .ipk-Datei ins Verzeichnis /tmp kopieren
      - VTI-Panel / Manuelle Installation von Paketen ausführen
      - Reboot

      Version 2.00c dort => Klick
      Files

      The post was edited 3 times, last by merten ().

    • super, kann am WE testen :)
      CAM: 2.3.0

      Skin: AI HD mod by Pich

      Plugins: MQB / Second Info Bar / EMC / Cutlisteditor-Movie Cutter / Autotimer / EPG-Refresh / ShootYourScreen / webradioFS / MediaPortal / MediaInfo / Downloadcenter / Picon Manager / Remove Picons / Navibar / Dateimanager / Imdb / Fancontrol2 / Sky Fanzone / AntiScrollbar
    • Ich teste auch mit, auf dem VDR ging das ja richtig gut
      ACHTUNG!!!! Hier folgt eine Signatur:


      Die Benutzung der Suche ist NICHT verboten! D:

      "Hilfe!!!" ist kein sinnvoller Titel für einen neuen Thread, ebensowenig "VU+Zero" oder vergleichbares.

      Keine Hilfe ohne ausgefülltes Profil!
    • Sobald die Kiste frei ist wird getestet, super Arbeit. :thumbsup:
      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


    • Hast den originalen cutlisteditor vorher deinstalliert?
      Der muß vorher deinstalliert werden.
      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


      The post was edited 1 time, last by bandito1966 ().

    • @daziak

      Die Fehlermeldung lautet "incompatible with the architecture configured", auf deutsch "Datei wurde für ein anderes Zielsystem erstellt". Da ich auf einer Duo2 entwickelt habe, ist die .ipk-Datei wohl zunächst nur auf einer Duo2 installierbar, obwohl das Programm auch auf jeder anderen VU laufen sollte.

      Könntest du versuchsweise die Datei umbenennen von "enigma2-plugin-experimental-cutlisteditor_2.00b-vuduo2.ipk" in "....-vuultimo.ipk" ?

      @schomi: Wie muss die Control-Datei aussehen, damit die .ipk-Datei unabhängig vom Zielsystem wird?
    • Im Control File => Architecture: all

      Installation auf anderen Boxen:
      Von Hand entpacken und ins Extensions Verzeichnis funktioniert.

      Erster Test
      - Funktioniert intuitiv mit dem Marker setzen, sehr schön ;thumbsup:
      - Springen funzt auch
      - Schnitt funktioniert

      - Steuerkreuz nach rechts, bewegt sich nichts, nach links funktioniert.
      Carpe diem!
      Vu+ Wiki
    • Kann es sein, dass das Plugin aus dem EMC heraus zu starten Probleme macht?
      Bei mir ist das Bild eingefroren beim starten vom cutlisteditor.
      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


    • Hing jetzt in einer GS Schleife, mein Skin Skalli macht wohl Probleme.

      Display Spoiler

      <?xml version="1.0" encoding="utf-8"?>
      <stbcrashlog>
      <dvbapp2>
      <crashdate>Tue Aug 18 22:26:14 2015</crashdate>
      <compiledate>Aug 7 2015</compiledate>
      <skin>AtileHD/skin.xml</skin>
      <sourcedate>2015-08-07</sourcedate>
      <branch>vti-master</branch>
      </dvbapp2>
      <image>
      <stbmodel>duo2</stbmodel>
      <kernelcmdline>libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
      <nimsockets>NIM Socket 0:</nimsockets>
      <vtiversion>8.2.3</vtiversion>
      <imageversion>
      <![CDATA[
      version=1000201504031011
      comment=vuplus
      target=9
      creator=VTi <info@vuplus-support.org>
      url=http://www.vuplus-support.org/
      catalog=http://www.vuplus-support.org
      ]]>
      </imageversion>
      </image>
      <software>
      <dvbapp2software>
      <![CDATA[
      enigma2 - vti-8.2.3-20150807-r1
      enigma2-data-enigma2 - vti-8.2.1-20150512-r0
      enigma2-data-fonts - vti-8.2.1-20150512-r0
      enigma2-data-keymaps - vti-8.2.1-20150512-r0
      enigma2-data-meta - vti-8.2.1-20150512-r0
      enigma2-data-spinner - vti-8.2.0-20150403-r0
      enigma2-data-xml - vti-8.2.3-20150807-r1
      enigma2-defaultservices - 1.0-r8-vti3
      enigma2-locale-de - vti-8.2.3-20150807-r1
      enigma2-locale-en - vti-8.2.1-20150512-r0
      enigma2-plugin-cams-oscam-unstable - 1.20+rev10892-r0
      enigma2-plugin-cams-oscam.1.20.10001 - 1.20+rev10001-r0
      enigma2-plugin-cams-oscam.1.20.9986 - 1.20+rev9986-r0
      enigma2-plugin-experimental-cutlisteditor - 2.00b
      enigma2-plugin-extensions-atilehd - 3.0-r2
      enigma2-plugin-extensions-cooltvguide - Coolman_V7.3.0
      enigma2-plugin-extensions-dvdplayer - vti-8.2.1-20150512-r0
      enigma2-plugin-extensions-enhancedmoviecenter - 3.7.0beta20141104-r0
      enigma2-plugin-extensions-epgimport - 1.0-r40-20150327
      enigma2-plugin-extensions-epgrefresh - experimental-git20150309-r0
      enigma2-plugin-extensions-epgsearch - experimental-git20150806-r0
      enigma2-plugin-extensions-filebrowservti - 1.3-20150406-r1
      enigma2-plugin-extensions-graphmultiepg - vti-8.2.3-20150807-r1
      enigma2-plugin-extensions-hbbtv - vti-8.2.1-20150512-r0
      enigma2-plugin-extensions-infobartunerstate - experimental-git20150309-r0
      enigma2-plugin-extensions-lcd4linux - 4.5-r5.duo2edition.r0
      enigma2-plugin-extensions-mediainfo - 2.6
      enigma2-plugin-extensions-mediaplayer - vti-8.2.1-20150512-r0
      enigma2-plugin-extensions-mediaportal - 7.1.8
      enigma2-plugin-extensions-mediascanner - vti-8.2.1-20150512-r0
      enigma2-plugin-extensions-moviecut - experimental-git20150309-r0
      enigma2-plugin-extensions-mpdcontrol - 0.2-r0
      enigma2-plugin-extensions-multiquickbutton-vu - 2.7.14-r3
      enigma2-plugin-extensions-openwebif - 0.4.7-e2openpluginsgit20150806-r0
      enigma2-plugin-extensions-oscambutler - 1.0-r6
      enigma2-plugin-extensions-permanenttimeshift - experimental-git20150309-r0
      enigma2-plugin-extensions-piconmanager - 2.2-20150329-r0
      enigma2-plugin-extensions-pictureplayer - vti-8.2.1-20150512-r0
      enigma2-plugin-extensions-remotechannelstreamconverter - 1.0-e2openpluginsgit20140106-r0
      enigma2-plugin-extensions-satipclient - vti-8.2.2-20150717-r0
      enigma2-plugin-extensions-secondinfobar - 2.8-r2
      enigma2-plugin-extensions-seekbar - experimental-git20150309-r0
      enigma2-plugin-extensions-shootyourscreen - 0.2-r2
      enigma2-plugin-extensions-streamtv - vti-8.2.1-20150512-r0
      enigma2-plugin-extensions-tvcharts - experimental-git20150309-r0
      enigma2-plugin-extensions-tvspielfilm - 6.4
      enigma2-plugin-extensions-webinterface - experimental-git20150309-r0
      enigma2-plugin-extensions-webradiofs - 13.33
      enigma2-plugin-extensions-xbmc - 1.0-20150424.1_beta_r0
      enigma2-plugin-extensions-yampmusicplayer - 2.6.5-2013-12-22
      enigma2-plugin-skin-750s - vti-8.2.2-20150530-r1
      enigma2-plugin-skin-atile - 3.2-r2
      enigma2-plugin-skin-skallihd - 6.40
      enigma2-plugin-skin-skallihd-skinpartpackage - 0.0.3
      enigma2-plugin-systemplugins-animationsetup - vti-8.2.2-20150618-r0
      enigma2-plugin-systemplugins-autoframerate - 0.2-r1
      enigma2-plugin-systemplugins-autoresolution - experimental-git20150309-r0
      enigma2-plugin-systemplugins-autoshutdown - 0.6-r9
      enigma2-plugin-systemplugins-blindscan - vti-8.2.2-20150601-r0
      enigma2-plugin-systemplugins-commoninterfaceassignment - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-devicemanager2 - 1.4-r7
      enigma2-plugin-systemplugins-firmwareupgrade - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-hdmicec - 1.2-r9
      enigma2-plugin-systemplugins-hmp-usb-dvb-c-t2 - 1.0-r0
      enigma2-plugin-systemplugins-hotplug - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-manualfancontrol - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-mphelp - experimental-git20150309-r0
      enigma2-plugin-systemplugins-networkbrowser - experimental-git20150309-r0
      enigma2-plugin-systemplugins-networkwizard - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-remotecontrolcode - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-satfinder - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-skinselector - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-toolkit - experimental-git20150309-r0
      enigma2-plugin-systemplugins-transcodingsetup - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-ui3dsetup - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-uipositionsetup - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-vfdskinselector - 1.3-r3
      enigma2-plugin-systemplugins-videoenhancement - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-videomode - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-videotune - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-wirelesslan - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-wirelesslansetup - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-wolsetup - vti-8.2.1-20150512-r0
      enigma2-plugin-systemplugins-zappingmodeselection - vti-8.2.1-20150512-r0
      enigma2-plugins-meta - experimental-git20150309-r0
      enigma2-python - vti-8.2.3-20150807-r1
      enigma2-skins-meta - vti-8.2.0-20150309-r1
      enigma2-streamproxy - 1.0+git15+37a3f19-r5
      enigma2-transtreamproxy - 2.0-r9-vti3+git36+074ccf7-r9-vti3
      task-vuplus-enigma2 - 1.0-r21.8-vti16
      ]]>
      </dvbapp2software>
      <gstreamersoftware>
      <![CDATA[
      gst-ffmpeg - 0.10.13-r4-vti1
      gst-plugin-dvbmediasink - 0.10+git130+9173821-r11-vti0
      gst-plugins-bad - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-cdxaparse - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-faad - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-fragmented - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-mms - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-mpegdemux - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-rtmp - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-bad-vcdsrc - 0.10.23.1+git12254+cef47d8-r5
      gst-plugins-base - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-alsa - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-app - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-audioconvert - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-audioresample - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-decodebin - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-decodebin2 - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-ogg - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-playbin - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-subparse - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-typefindfunctions - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-base-vorbis - 0.10.36.1+git10186+bdb3316-r2
      gst-plugins-good - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-apetag - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-audioparsers - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-autodetect - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-avi - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-flac - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-flv - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-icydemux - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-id3demux - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-isomp4 - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-matroska - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-rtp - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-rtpmanager - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-rtsp - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-souphttpsrc - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-udp - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-good-wavparse - 0.10.31.1+git10789+7768342-r5-vti1
      gst-plugins-ugly - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-asf - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-cdio - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-dvdsub - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-mad - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-mpegaudioparse - 0.10.19.1+git4638+9afc696-r1
      gst-plugins-ugly-mpegstream - 0.10.19.1+git4638+9afc696-r1
      gstreamer - 0.10.36.1+git12092+1bcabb9-r4
      libgstapp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstaudio-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstcdda-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstinterfaces-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstnetbuffer-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstpbutils-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstriff-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstrtp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstrtsp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstsdp-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgsttag-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      libgstvideo-0.10-0 - 0.10.36.1+git10186+bdb3316-r2
      ]]>
      </gstreamersoftware>
      </software>
      <crashlogs>
      <dvbapp2crashlog>
      <![CDATA[
      thon/mytest.py
      resolve: -> /usr/lib/enigma2/python/mytest.py
      resolve: resolve ${sysconfdir}/
      resolve: -> /etc/
      resolve: resolve ${sysconfdir}/
      resolve: -> /etc/
      resolve: resolve ${datadir}/fonts/
      resolve: -> /usr/share/fonts/
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      resolve: resolve ${libdir}/enigma2/python/Plugins/
      resolve: -> /usr/lib/enigma2/python/Plugins/
      resolve: resolve ${datadir}/enigma2/po/
      resolve: -> /usr/share/enigma2/po/
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      resolve: resolve ${sysconfdir}/enigma2/playlist/
      resolve: -> /etc/enigma2/playlist/
      resolve: resolve ${datadir}/enigma2/defaults/
      resolve: -> /usr/share/enigma2/defaults/
      resolve: resolve ${datadir}/enigma2/dealer
      resolve: -> /usr/share/enigma2/dealer
      resolve: resolve ${datadir}/meta
      resolve: -> /usr/share/meta
      resolve: resolve ${datadir}/enigma2/defaults/
      resolve: -> /usr/share/enigma2/defaults/
      enumerating block devices...
      found block device 'sda': ok, removable=False, cdrom=False, partitions=['sda1']
      new Harddisk sda -> /dev/sda -> /dev/sda
      found block device 'sda1': error querying properties
      found block device 'sdb': ok, removable=False, cdrom=False, partitions=['sdb1', 'sdb2']
      new Harddisk sdb -> /dev/sdb -> /dev/sdb
      found block device 'sdb1': error querying properties
      found block device 'sdb2': error querying properties
      found block device 'loop0': blacklisted
      found block device 'loop1': blacklisted
      found block device 'loop2': blacklisted
      found block device 'loop3': blacklisted
      found block device 'loop4': blacklisted
      found block device 'loop5': blacklisted
      found block device 'loop6': blacklisted
      found block device 'loop7': blacklisted
      found block device 'mtdblock0': blacklisted
      found block device 'mtdblock1': blacklisted
      found block device 'mtdblock2': blacklisted
      found block device 'mtdblock3': blacklisted
      found block device 'mtdblock4': blacklisted
      not loading user skin: [Errno 2] No such file or directory: '/etc/enigma2/skin_user.xml'
      [VTi] loading vfd skin: vfd_skin/skin_vfd_vti_I.xml
      [VTi] not loading user defined colors for skin
      [VTi] not loading user defined header file for skin
      [VTi] loading modular skin file : SkalliHD/mySkin/skin_IB_classic.xml
      menu_mainmenu
      Reading satellites.xml
      Reading cables.xml
      couldn't open /etc/tuxbox/cables.xml!!
      Reading terrestrial.xml
      resolve: resolve ${datadir}/enigma2/unicable.xml
      resolve: -> /usr/share/enigma2/unicable.xml
      [InitNimManager] check multi type slot 0
      [InitNimManager] check multi type slot 1
      [InitNimManager] check multi type slot 2
      [InitNimManager] slot 2 is multi type : {'1': 'DVB-T', '0': 'DVB-C'}
      [eDVBResourceManager::setFrontendType] index : 2, type : DVB-T
      tuner type is already already 1
      [Nimmanager] slot 0 create config satellite..
      [Nimmanager] slot 1 create config satellite..
      [Nimmanager] slot 2 create config terrestrial..
      removing internal link on frontend id 1
      sec config cleared
      setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM(AVL6222), need rotorworkaround No, enabled No, DVB-S2 Yes, DVB-T2 No
      setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM(AVL6222), need rotorworkaround No, enabled No, DVB-S2 Yes, DVB-T2 No
      setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-T NIM(CXD1978), need rotorworkaround No, enabled No, DVB-S2 No, DVB-T2 No
      slot: 0 configmode: simple
      diseqcmode: single
      slot: 1 configmode: equal
      sec config completed
      resolve: resolve ${datadir}/enigma2/setup.xml
      resolve: -> /usr/share/enigma2/setup.xml
      Preferred tag editor set to None
      main thread is non-idle! display spinner!
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/bouquets.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.dbe01.tv
      70 entries in Bouquet userbouquet.dbe01.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.dbe00.tv
      31 entries in Bouquet userbouquet.dbe00.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.favourites.tv
      88 entries in Bouquet userbouquet.favourites.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.dbe03.tv
      7 entries in Bouquet userbouquet.dbe03.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.dbe04.tv
      27 entries in Bouquet userbouquet.dbe04.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.dbe02.tv
      12 entries in Bouquet userbouquet.dbe02.tv
      6 entries in Bouquet bouquets.tv
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/bouquets.radio
      resolve: resolve ${sysconfdir}/enigma2/
      resolve: -> /etc/enigma2/
      loading bouquet... /etc/enigma2/userbouquet.favourites.radio
      22 entries in Bouquet userbouquet.favourites.radio
      1 entries in Bouquet bouquets.radio
      [eDVBLocalTimeHandler] enable sync local time with transponder time!
      add dreampackage scanner plugin
      added
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
      [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
      [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
      [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Arial)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (Regular)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/Roboto-Regular.ttf...OK (RegularLight)
      [FONT] adding font /usr/share/enigma2/AtileHD/fonts/meteocons.ttf...OK (Meteo)
      [FONT] adding font /usr/share/fonts/analog.ttf...OK (VFD)
      [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (VFD_II)
      [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
      [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
      cannot open /proc/stb/avs/0/input_choices
      --> setting scaler_sharpness to: 00000013
      couldn't open /proc/stb/misc/12V_output
      resolve: resolve ${datadir}/enigma2/keymap.xml
      resolve: -> /usr/share/enigma2/keymap.xml
      setLCDBrightness 25
      setLCDBrightness 127
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      Activating keymap: Keyboard English
      resolve: resolve ${datadir}/keymaps/
      resolve: -> /usr/share/keymaps/
      Activating language German
      language set to de_DE
      FIXME: request for unknown slot
      FIXME: request for unknown slot
      [WebInterface] set language to de
      main thread is non-idle! display spinner!
      [FONT] adding font /usr/lib/enigma2/python/Plugins/Extensions/TVSpielfilm/font/Sans.ttf...OK (Sans)
      [PiconManager] set language to de
      [PiconManager] set language to de
      remove DVI-PC because it does not exist.
      hotplug on DVI
      set Videomode DVI 720p multi
      set aspect, policy, policy2, wss 16:9 bestfit bestfit auto
      Imports: isDream: True
      ('[MediaPortal] fallback to default translation for', 'Wall')
      ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      ('[MediaPortal] fallback to default translation for', 'PVR/VIDEO')
      ('[MediaPortal] fallback to default translation for', 'EPG/INFO')
      ('[MediaPortal] fallback to default translation for', 'GENRES')
      main thread is non-idle! display spinner!
      resolve: resolve ${datadir}/enigma2/setup.xml
      resolve: -> /usr/share/enigma2/setup.xml
      resolve: resolve ${libdir}
      resolve: -> /usr/lib
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/TransCodingSetup/plugin.pyo
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/TransCodingSetup/plugin.pyo
      [FilebrowserVTi] set language to de
      [FilebrowserVTi] set language to de
      [FilebrowserVTi] set language to de
      [FilebrowserVTi] set language to de
      [WebInterface] set language to de
      [eTPM] connect error
      [WebInterface] fallback to default translation for Webinterface
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      [Yamp] Set language to de
      [Yamp] Set language to de
      [Yamp] Fallback to default Enigma2 Translation for YAMP Music Player
      [Yamp] Fallback to default Enigma2 Translation for YAMP Music Player
      [Yamp] Fallback to default Enigma2 Translation for YAMP Music Player
      [ShootYourScreen] set language to de
      [ShootYourScreen] set language to de
      [LCD4linux] libusb found :) 2015-08-07-vti-master
      /usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/EnhancedMovieCenter.png: 100x40x8 png, 2
      [MovieCut] set language to de
      [MovieCut] set language to de
      resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/MovieCut/bin/mcut
      resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/MovieCut/bin/mcut
      <ZappingModeSelection> set zapping mode : mute
      resolve: resolve ${datadir}/enigma2/
      resolve: -> /usr/share/enigma2/
      resolve: resolve ${libdir}/enigma2/python/Plugins/SystemPlugins/WirelessLan
      resolve: -> /usr/lib/enigma2/python/Plugins/SystemPlugins/WirelessLan
      --> setting contrast to: 00008000
      --> setting saturation to: 00008000
      --> setting hue to: 00008000
      --> setting brightness to: 00008000
      --> setting block_noise_reduction to: 00000000
      --> setting mosquito_noise_reduction to: 00000000
      --> setting digital_contour_removal to: 00000000
      --> setting splitmode to: off
      --> setting sharpness to: 00000000
      --> setting auto_flesh to: 00000000
      --> setting green_boost to: 00000000
      --> setting blue_boost to: 00000000
      --> setting dynamic_contrast to: 00000000
      --> setting scaler_vertical_dejagging to: disable
      --> setting smooth to: disable
      --> applying pep values
      [UIPositionSetup] write dst_left : 15
      [UIPositionSetup] write dst_width : 690
      [UIPositionSetup] write dst_top : 15
      [UIPositionSetup] write dst_height : 546
      [DeviceManager2] Loading skin /usr/lib/enigma2/python/Plugins/SystemPlugins/DeviceManager2/skin.xml
      CIFSMOUNT {'username': 'admin', 'sharedir': 'Public', 'sharename': 'NASSERVER', 'active': 'True', 'ip': '192.168.178.60', 'hdd_replacement': 'False', 'password': 'dont4get', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}
      [AutoMount.py] -getAutoMountPoints:self.automounts --> {'NASSERVER': {'username': 'admin', 'sharedir': 'Public', 'sharename': 'NASSERVER', 'active': 'True', 'ip': '192.168.178.60', 'hdd_replacement': 'False', 'password': 'dont4get', 'isMounted': False, 'mounttype': 'cifs', 'options': 'rw'}}
      [AutoMount.py] CheckMountPoint
      [AutoMount.py] activeMounts:---> 1
      [AutoMount.py] U/MOUNTCMD---> mount -t cifs -o rw,rsize=8192,wsize=8192,iocharset=utf8,username=admin,password=dont4get //192.168.178.60/Public /media/net/NASSERVER
      <RemoteControlCode> Write Remote Control Code : 2
      [EPGImport] autostart (0) occured at 1439929572.49
      [MultiQuickButton] enabled: True
      [CI_Assignment] activating ci configs:
      [CI_Activate] FOUND 2 CI Slots
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      [CI_Activate_Config_CI0] no config file found
      [CI_Activate_Config_CI0] error parsing xml...
      resolve: resolve ${sysconfdir}/enigma2/ci
      resolve: -> /etc/enigma2/ci
      [CI_Activate_Config_CI1] no config file found
      [CI_Activate_Config_CI1] error parsing xml...
      starting hotplug handler
      [TIMER] record time changed, start prepare is now: Wed Aug 19 20:03:40 2015
      sanitycheck
      check
      checkTimerlist
      recording service: 1:0:1:445D:453:1:C00000:0:0:0:
      record: 0
      [Timer] Record <RecordTimer.RecordTimerEntry object at 0x2e77c10>
      ProcessRepeated
      next real activation is Wed Aug 19 20:03:40 2015
      [TIMER] record time changed, start prepare is now: Fri Aug 21 17:59:40 2015
      sanitycheck
      check
      checkTimerlist
      recording service: 1:0:1:445D:453:1:C00000:0:0:0:
      record: 0
      [Timer] Record <RecordTimer.RecordTimerEntry object at 0x2e77c90>
      ProcessRepeated
      localrepeatedbegindate: Fri Aug 21 18:00:00 2015
      localbegin: Fri Aug 21 18:00:00 2015
      localend: Fri Aug 21 20:00:00 2015
      localnow: Tue Aug 18 22:26:13 2015
      Day: 4
      Day: 5
      Day: 6
      ProcessRepeated result
      Fri Aug 21 18:00:00 2015
      Fri Aug 21 20:00:00 2015
      already passed, skipping
      shouldSkip: False
      state == ended False
      waiting && disabled: 1
      [browser] browser start
      Looking for embedded skin
      InfoBarTunerState start
      Looking for embedded skin
      [MediaInfo] READ OLD JOBS !!!
      Setvolume: 100 100 (raw)
      Setvolume: 0 0 (-1db)
      [EPGImport] autostart (0) occured at 1439929572.7
      [EPGImport] WakeUpTime now set to -1 (now=1439929572)
      Repeated: 1
      Repeated: 3
      Repeated: 7
      Repeated: 15
      Repeated: 31
      Repeated: 63
      Repeated: 127
      ProcessRepeated
      localrepeatedbegindate: Tue Aug 18 23:00:00 2015
      localbegin: Tue Aug 18 23:00:00 2015
      localend: Tue Aug 18 23:00:00 2015
      localnow: Tue Aug 18 22:26:13 2015
      Day: 0
      Day: 1
      Day: 2
      Day: 3
      Day: 4
      Day: 5
      Day: 6
      ProcessRepeated result
      Tue Aug 18 23:00:00 2015
      Tue Aug 18 23:00:01 2015
      next real activation is Tue Aug 18 23:00:01 2015
      [ShootYourScreen] start....
      EMC: +++ EMC V3.7.4beta20131015 startup
      [MultiQuickButton] enabled: True
      [AutoShutDown] start....
      Looking for embedded skin
      port changed to DVI
      mode changed to 720p
      default ('720p', 'Standard')
      preferedmodes ['1080i', '1080p', '576p', '480p', '576i', '480i', ('720p', 'Standard')]
      [Toplevel.importExternalModules] Imported external module: Example
      [Toplevel.importExternalModules] Imported external module: EPGRefresh
      [HTTPRootResource}.__init__
      [Webinterface] started on 0.0.0.0:80 auth=False ssl=False
      [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      [HTTPRootResource}.__init__
      [Webinterface] started on 0.0.0.0:443 auth=True ssl=True
      [WebInterface.registerBonjourService] No module named Bonjour.Bonjour
      [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      [EPGC] time updated.. start EPG Mainloop
      before: 1
      after: 1
      not showing fine-tuning wizard, config variable doesn't exist
      showtestcard is false
      Looking for embedded skin
      [EPGC] create epg.dat backup
      setValue 70
      Setvolume: 70 70 (raw)
      Setvolume: 19 19 (-1db)
      service reference for epg query is not valid
      service reference for epg query is not valid
      warning, skin is missing element etitle in <class 'Screens.ChannelSelection.ChannelSelection'>
      RemovePopup, id = ZapError
      Traceback (most recent call last):
      File "/usr/lib/enigma2/python/mytest.py", line 201, in processDelay
      callback(*retval)
      File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
      return self.fnc(*self.args + args, **newkwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 495, in runNextScreen
      session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
      File "/usr/lib/enigma2/python/mytest.py", line 302, in openWithCallback
      dlg = self.open(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 312, in open
      dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
      File "/usr/lib/enigma2/python/mytest.py", line 247, in instantiateDialog
      return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
      File "/usr/lib/enigma2/python/mytest.py", line 278, in doInstantiateDialog
      dlg.applySkin()
      File "/usr/lib/enigma2/python/Components/GUISkin.py", line 112, in applySkin
      self.createGUIScreen(self.instance, self.desktop)
      File "/usr/lib/enigma2/python/Components/GUISkin.py", line 21, in createGUIScreen
      if not val.applySkin(desktop, self):
      File "/usr/lib/enigma2/python/Components/GUIComponent.py", line 39, in applySkin
      skin.applyAllAttributes(self.instance, desktop, self.skinAttributes, parent.scale)
      File "/usr/lib/enigma2/python/skin.py", line 400, in applyAllAttributes
      applySingleAttribute(guiObject, desktop, attrib, value, scale)
      File "/usr/lib/enigma2/python/skin.py", line 350, in applySingleAttribute
      guiObject.setForegroundColor(parseColor(value))
      File "/usr/lib/enigma2/python/skin.py", line 181, in parseColor
      raise SkinError("color '%s' must be #aarrggbb or valid named color" % (str))
      skin.SkinError: {AtileHD/skin.xml}: color 'Text1' must be #aarrggbb or valid named color
      (PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x2e7b198>>,()) failed)
      [EPGC] 83221 events read from /hdd/epg.dat
      [EPGC] create real epg.dat backup
      ]]>
      </dvbapp2crashlog>
      </crashlogs>
      </stbcrashlog>

      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


    • Source Code

      1. >>Start File Installation<<
      2. -> opkg install /tmp/enigma2-plugin-experimental-cutlisteditor_2.00b_vuduo2.ipk
      3. exit
      4. Unknown package 'enigma2-plugin-experimental-cutlisteditor'.
      5. Collected errors:
      6. * pkg_hash_fetch_best_installation_candidate: Packages for enigma2-plugin-experimental-cutlisteditor found, but incompatible with the architectures configured
      7. * opkg_install_cmd: Cannot install package enigma2-plugin-experimental-cutlisteditor.
      8. root@bm750:~# rm /tmp/*.ipk
      9. root@bm750:~# exit
      10. logout


      Installation über iDreamX auf vu duo2
    • Mit Atile gehts, Schnittpunkt verschieben ist schon mal genial.
      Ersten Film geschnitten, alles wie es soll. :thumbsup:
      Jetzt muß nur mein Skalli wieder her. ;)
      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


    • vu.plus wrote:

      Source Code

      1. >>Start File Installation<<
      2. -> opkg install /tmp/enigma2-plugin-experimental-cutlisteditor_2.00b_vuduo2.ipk
      3. exit
      4. Unknown package 'enigma2-plugin-experimental-cutlisteditor'.
      5. Collected errors:
      6. * pkg_hash_fetch_best_installation_candidate: Packages for enigma2-plugin-experimental-cutlisteditor found, but incompatible with the architectures configured
      7. * opkg_install_cmd: Cannot install package enigma2-plugin-experimental-cutlisteditor.
      8. root@bm750:~# rm /tmp/*.ipk
      9. root@bm750:~# exit
      10. logout


      Installation über iDreamX auf vu duo2


      bm750 ist doch nicht duo2, dass ist alte duo.
      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


    • Habe ich gemacht, dann friert beim start vom cutlisteditor trotzdem das Bild ein.
      Beim neustart dann wieder GS/LS Schleife.
      Gruß

      Jürgen

      _________

      DUO 4K
      DVB-S2x (Seagate ST2000ML015) Fluid Next/Inverto IDLU-UST110-CUO1O-32P
      UNO 4K SE DVB-S2x (TOSHIBA MQ01ABD1) linearFHD/DUR-Line UK 124
      SOLO 4K DVB-S2 (TOSHIBA MQ01ABD100) Fluid Next/DUR-Line UK 124

      VTi 14.0.aktuell
      V13 (CI+ Modul)
      HD02 (Oscam) im Stinger


      The post was edited 1 time, last by bandito1966 ().