Für Interessenten an meoboots für œ 1,6 image hier ist eine kurze Anleitung. Hoffe, es wird eine Hilfe sein.
1 / installieren sie AAF_HOT_SUMMER_V2_final Version Barry Allen (interner Flash)
USB. in der üblichen Weise über den Front USB-Port.
2 / Einmal installiert. Schalten Sie Vu + von hinten mit dem Netzschalter.
3 / Get einem USB-Stick und formatieren Sie es mit dem HP-Format auf FAT 32 utiliy.
4 / Während Vu + ist immer noch aus, legen Sie die formatierten USB-Stick in den eingeschalteten
niedrigsten USB-Anschluss in der Rückseite Ihres Vu +.
5 / Power on Vu + wieder mit dem Netzschalter auf der Rückseite des Vu +.
6 / Nach einer Weile AAF_HOT_SUMMER_V2 wird auf Ihrem Bildschirm erscheinen
.
7 / Gehe zu, um On-Manager hinzufügen und unter Plugins installieren Barry Allen Version 5.1.15.
8 / Nach Abschluss der Installation von Barry Allen, den dcc296 öfnen und gehen Sie zu
/ Media / hdd / MB_Images
Dies ist im Fall, dass Sie keine HDD haben weder eine interne noch externe HDD ( Hardrive )
Festplatten. Wenn Sie eine von ihnen dann nach / media / USB / MB_Images Go.
9 / Einmal in MB_Images, Ftp Ihr Bild auf meoboot MB_Images und
Geben Sie ihm einen CHMOD 755.
10 / Nun zu Vu +> go plugins> Barry Allen klicken Sie darauf und ein Bildschirm erscheint ein menu
Assistent für Image auf / MB_Images klicken Sie darauf und einem Bildschirm erscheint, Wählen
ein menu punkt nfi image / MB_Images erscheint, klicken Sie es erscheint ein anderen Bildschirm,
Hier wählen Sie das Bild mit dem Sie MB_Images übertragen.
Wählen Sie das image und benennen Sie es wie Sie wollen und drücken Sie OK.
Die Installation wird gestartet. Nach Abschluss werden Sie
das image sehen auf den Bildschirm des Flash-Image.
11 / plugins Nun zu gehen> Barry Allen klicken Sie> Wählen Sie (Wizrd für installierte
image) klicken Sie> und Wählen Sie (Select installiert image für das Booten) klicken und
Wählen Sie Ihre Meoboot image aus und drücken Sie OK.
12 / Vu + wird automatisch neu gestartet und nach einigen Minuten Ihrer Meoboot
Bild erscheint auf dem Bildschirm.
Sie können das gleiche Verfahren wiederholen zu installieren so viele image wie Sie möchten
vorausgesetzt, alle Bilder sind compatabilwith das Flash Bild. In diesem Fall werden alle
Bilder sollten die neuen Versionen VTi 2/Gigant 2 usw. Sie alle werden muss
haben œ 1,6 sonst das System nicht funktionieren.
Wichtiger Hinweis: Open Pli Bilder nicht mit diesem System arbeiten, weil
der OE Kompatibilitätsprobleme
anleitung ist von einem anderen Bord
danke an unisat
For those interested in meoboots for OE 1.6 images here is a short guide. Hope it will be of help.
1/ in flash (internal Flash) install AAF_HOT_SUMMER_V2_final version
Usb. in the usual manner using the front usb port.
2/ once installed. Switch off Vu+from back using the power button.
3/ Get a usb stick and format it using the hp format utiliy to FAT 32.
4/ While Vu+ is still switched off, insert the formatted usb stick in the
lowest usb port in the back of your Vu+.
5/ Power on Vu+ using again the power button in the back of Vu+.
6/ After a while the AAF_HOT_SUMMER_V2 will appear on your screen.
7/ Go to to Add on Manager and under plugins install Barry Allen Version
5.1.15.
8/ After completion of installation of Barry Allen, Use dcc296 and go to
/media/hdd/MB_Images
this is in case you donot have neither an internal nor external Hardrive
disks. If you have any one of them then Go to /media/USB/MB_Images.
9/ Once in in MB_Images , Ftp your meoboot image to MB_Images and
give it a CHMOD 755.
10/ Now go to Vu+ > plugins> Barry Allen click it and a screen will appear
go to
(Wizard for images at / MB_Images click it and a screen will appear,
Choose
( Extract nfi image from /MB_Images, Click it another screen appears ,
Here you will select the image which you transferred to MB_Images.
Choose the image and Rename it as you want and the press OK.
the process of extraction or installing will start. Upon completion you will
see the screen of the Flash image.
11/ Now go to plugins > Barry Allen click it> Choose (Wizrd For installed
images) click it> Choose (Select installed image for booting ) click it and
select your Meoboot image and press OK.
12/ Vu+ will reboot automatically and after several minutes your Meoboot
image will appear on screen.
You can repeat the same procedure to install as many images as you like
provided all images are compatabilwith the Flash image,. In this case all
images should be the new versions of VTi 2/Gigant 2 etc. They all must
have OE 1.6 otherwise the system wont work.
Important Notice: Open Pli images do not work with this system because
of O.E compatibility issues.
Regards
1 / installieren sie AAF_HOT_SUMMER_V2_final Version Barry Allen (interner Flash)
USB. in der üblichen Weise über den Front USB-Port.
2 / Einmal installiert. Schalten Sie Vu + von hinten mit dem Netzschalter.
3 / Get einem USB-Stick und formatieren Sie es mit dem HP-Format auf FAT 32 utiliy.
4 / Während Vu + ist immer noch aus, legen Sie die formatierten USB-Stick in den eingeschalteten
niedrigsten USB-Anschluss in der Rückseite Ihres Vu +.
5 / Power on Vu + wieder mit dem Netzschalter auf der Rückseite des Vu +.
6 / Nach einer Weile AAF_HOT_SUMMER_V2 wird auf Ihrem Bildschirm erscheinen
.
7 / Gehe zu, um On-Manager hinzufügen und unter Plugins installieren Barry Allen Version 5.1.15.
8 / Nach Abschluss der Installation von Barry Allen, den dcc296 öfnen und gehen Sie zu
/ Media / hdd / MB_Images
Dies ist im Fall, dass Sie keine HDD haben weder eine interne noch externe HDD ( Hardrive )
Festplatten. Wenn Sie eine von ihnen dann nach / media / USB / MB_Images Go.
9 / Einmal in MB_Images, Ftp Ihr Bild auf meoboot MB_Images und
Geben Sie ihm einen CHMOD 755.
10 / Nun zu Vu +> go plugins> Barry Allen klicken Sie darauf und ein Bildschirm erscheint ein menu
Assistent für Image auf / MB_Images klicken Sie darauf und einem Bildschirm erscheint, Wählen
ein menu punkt nfi image / MB_Images erscheint, klicken Sie es erscheint ein anderen Bildschirm,
Hier wählen Sie das Bild mit dem Sie MB_Images übertragen.
Wählen Sie das image und benennen Sie es wie Sie wollen und drücken Sie OK.
Die Installation wird gestartet. Nach Abschluss werden Sie
das image sehen auf den Bildschirm des Flash-Image.
11 / plugins Nun zu gehen> Barry Allen klicken Sie> Wählen Sie (Wizrd für installierte
image) klicken Sie> und Wählen Sie (Select installiert image für das Booten) klicken und
Wählen Sie Ihre Meoboot image aus und drücken Sie OK.
12 / Vu + wird automatisch neu gestartet und nach einigen Minuten Ihrer Meoboot
Bild erscheint auf dem Bildschirm.
Sie können das gleiche Verfahren wiederholen zu installieren so viele image wie Sie möchten
vorausgesetzt, alle Bilder sind compatabilwith das Flash Bild. In diesem Fall werden alle
Bilder sollten die neuen Versionen VTi 2/Gigant 2 usw. Sie alle werden muss
haben œ 1,6 sonst das System nicht funktionieren.
Wichtiger Hinweis: Open Pli Bilder nicht mit diesem System arbeiten, weil
der OE Kompatibilitätsprobleme
anleitung ist von einem anderen Bord
danke an unisat
For those interested in meoboots for OE 1.6 images here is a short guide. Hope it will be of help.
1/ in flash (internal Flash) install AAF_HOT_SUMMER_V2_final version
Usb. in the usual manner using the front usb port.
2/ once installed. Switch off Vu+from back using the power button.
3/ Get a usb stick and format it using the hp format utiliy to FAT 32.
4/ While Vu+ is still switched off, insert the formatted usb stick in the
lowest usb port in the back of your Vu+.
5/ Power on Vu+ using again the power button in the back of Vu+.
6/ After a while the AAF_HOT_SUMMER_V2 will appear on your screen.
7/ Go to to Add on Manager and under plugins install Barry Allen Version
5.1.15.
8/ After completion of installation of Barry Allen, Use dcc296 and go to
/media/hdd/MB_Images
this is in case you donot have neither an internal nor external Hardrive
disks. If you have any one of them then Go to /media/USB/MB_Images.
9/ Once in in MB_Images , Ftp your meoboot image to MB_Images and
give it a CHMOD 755.
10/ Now go to Vu+ > plugins> Barry Allen click it and a screen will appear
go to
(Wizard for images at / MB_Images click it and a screen will appear,
Choose
( Extract nfi image from /MB_Images, Click it another screen appears ,
Here you will select the image which you transferred to MB_Images.
Choose the image and Rename it as you want and the press OK.
the process of extraction or installing will start. Upon completion you will
see the screen of the Flash image.
11/ Now go to plugins > Barry Allen click it> Choose (Wizrd For installed
images) click it> Choose (Select installed image for booting ) click it and
select your Meoboot image and press OK.
12/ Vu+ will reboot automatically and after several minutes your Meoboot
image will appear on screen.
You can repeat the same procedure to install as many images as you like
provided all images are compatabilwith the Flash image,. In this case all
images should be the new versions of VTi 2/Gigant 2 etc. They all must
have OE 1.6 otherwise the system wont work.
Important Notice: Open Pli images do not work with this system because
of O.E compatibility issues.
Regards
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von willy1508 ()