Oscam kompilieren - was fehlt ?

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Oscam kompilieren - was fehlt ?

      Moin zsamme,

      die frische V14 ist da und mein Raspi will die nicht im Oscam. Ich bekomme immer
      • 2014/10/04 20:07:10 1E07820 r skyv14 [smartreader] card system not supported


      Spoiler anzeigen
      Unix starttime: 1412445784
      Starttime: 04.10.2014 20:03:04
      Version: oscam-1.20-unstable_svn-r9846
      Compiler: arm-linux-gnueabihf-ssl-libusb
      ConfigDir: /usr/local/etc/

      Web interface support: yes
      LiveLog support: yes
      jQuery support intern: yes
      Touch interface support: no
      SSL support: yes
      DVB API support: no
      Irdeto guessing: no
      Anti-cascading support: no
      Debug mode: yes
      Monitor: yes
      Loadbalancing support: no
      Cache exchange support: no
      CW Cycle Check support: yes
      LCD support: no
      LED support: no
      Clockfix with realtime clock: yes
      IPv6 support: no

      camd 3.3x: no
      camd 3.5 UDP: no
      camd 3.5 TCP: no
      newcamd: no
      CCcam: yes
      CCcam share: yes
      gbox: no
      radegast: no
      serial: yes
      constant CW: yes
      Pandora: no
      ghttp: no

      Reader support: yes

      Nagra: yes
      Irdeto: yes
      Conax: no - no EMM support!
      Cryptoworks: no - no EMM support!
      Seca: no - no EMM support!
      Viaccess: no - no EMM support!
      NDS Videoguard: yes
      DRE Crypt: no - no EMM support!
      TONGFANG: no - no EMM support!
      Bulcrypt: no - no EMM support!
      Griffin: no - no EMM support!
      DGCrypt: no - no EMM support!

      cardreader_phoenix: no
      cardreader_internal_azbox: no
      cardreader_internal_coolapi: no
      cardreader_internal_sci: no
      cardreader_sc8in1: no
      cardreader_mp35: no
      cardreader_smargo: yes
      cardreader_pcsc: no
      cardreader_smartreader: yes
      cardreader_db2com: no
      cardreader_stapi: no
      cardreader_stinger: no


      Was hab ich denn vergessen einzukompilieren ?
      Oscam auf Raspi in Smargo.

    • Configs?
      checking for long long... yes<br>
      checking for long double... yes<br>
      +++ Divide By Cucumber Error. Stopping. +++<br><br>

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von mamba0815 ()

    • [reader]
      label = skyv14
      description = Sky V14 Karte
      protocol = smartreader
      device = Serial:Reader lalala
      services = sky
      caid = 098C
      ins7e11 = 15
      detect = cd
      mhz = 368
      cardmhz = 2700
      autospeed = 1
      group = 2
      emmcache = 1,3,2
      blockemm-unknown = 1
      blockemm-u = 1
      blockemm-s = 1
      blockemm-g = 1
      saveemm-u = 1
      ndsversion = 2

      cardmhz aund autospeed wusste tante google.. ansonsten ? mhh

      • 2014/10/04 20:06:56 1DDF928 h skyv14 [smartreader] Restarting reader
      • 2014/10/04 20:06:56 1DDF928 h skyv14 [smartreader] creating thread for device Serial:Reader
      • 2014/10/04 20:06:56 1E07820 r skyv14 [smartreader] Reader initialized (device=Serial:Reader , detect=cd, mhz= AUTO, cardmhz=369)
      • 2014/10/04 20:06:56 1E07820 r skyv14 [smartreader] card detected
      • 2014/10/04 20:07:00 1E07820 r skyv14 [smartreader] ATR: 3F...03
      • 2014/10/04 20:07:00 1E07820 r skyv14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
      • 2014/10/04 20:07:00 1E07820 r skyv14 [smartreader] Calculated work ETU is 17.42 us reader mhz = 534
      • 2014/10/04 20:07:00 1E07820 r skyv14 [smartreader] Effective reader settings mhz =534 F= 372 D= 4 N=2 T=0 inv=1 parity=ODD
      • 2014/10/04 20:07:01 1E07820 r skyv14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] Card type: P1TV
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] Rom version: 20AA
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] Credit available on card: 0 euro
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] classD0 ins36: encrypted - can't parse
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] no boxID available
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] card system not supported
      • 2014/10/04 20:07:02 1E07820 r skyv14 [smartreader] Normal mode failed, reverting to Deprecated Mode
      • 2014/10/04 20:07:06 1E07820 r skyv14 [smartreader] ATR: 3F ...03
      • 2014/10/04 20:07:06 1E07820 r skyv14 [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
      • 2014/10/04 20:07:06 1E07820 r skyv14 [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
      • 2014/10/04 20:07:06 1E07820 r skyv14 [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=2 T=0 inv=1 parity=ODD
      • 2014/10/04 20:07:07 1E07820 r skyv14 [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
      • 2014/10/04 20:07:10 1E07820 r skyv14 [smartreader] card system not supported
      • 2014/10/04 20:07:10 1E07820 r skyv14 [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
      • 2014/10/04 20:07:10 1E07820 r skyv14 [smartreader] card initializing error

      Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von hoschi78 ()

    • [reader]
      label = skyv14
      description = Sky V14 Karte
      protocol = smartreader
      device = Serial:Reader dumdidum
      services = sky
      caid = 098C
      detect = cd
      group = 2
      emmcache = 1,3,2
      blockemm-unknown = 1
      blockemm-u = 1
      blockemm-s = 1
      blockemm-g = 1
      saveemm-u = 1
      ndsversion = 2

      selbes Problem

    • ach du meine fresse -.-
      wer lesen kann ne ? das wars haha.. viel zu simpel :D
      danke

      die karte sieht komplett jungfräulich aus.. im webIF ist bei FUSE(NDS) goar nix drin.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von hoschi78 ()

    • dann kanns ja jetzt ans aktivieren gehen...


      wobei im log grad steht

      • 2014/10/04 20:41:26 18DE928 r skyv14 [videoguard2] classD3 ins54: no cw --> Card isn't active
      • 2014/10/04 20:41:26 18DE928 r skyv14 [videoguard2] classD3 ins54: no cw --> Card is paired
      ohne das bisher auch nur 1 emm geschrieben wurde ?

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von hoschi78 ()