Smargo Smartreader Update_v1.5.zip 1.05

Example ID smartcardreader+ with smartcard

We have three smartcards and three smartreader+.
card1 = First Full card
card2 = Second Full card
card3 = Starter card

We will give the three smartreaders+ an ID
First smartreader+ we will ID as "READER F"
second smartreader+ we will ID as "READER G"
Third smartreader+ we will ID as "READER S"

We program the ID into the smartreader+
./srp_tool -n F
./srp_tool -n G
./srp_tool -n S

we place the smartcards into the smartreader+
smartcard first full card into Reader F
smartcard second full card into Reader G
smartcard starter card into Reader S


Now we will set a name in linux OS for the smartreader+
Modify or add a new file in /etc/udev/ (depand on linux OS)

First Full card is placed in smartreader+ called "Reader F". We will name it in linux OS "sr+_firstfull"
Than this line must be placed in the file:
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader F", SYMLINK+="Sr+_firstfull"

Second Full card is placed in smartreader+ called "Reader G". We will name it in linux OS "sr+_secondfull"
Than this line must be placed in the file:
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader G", SYMLINK+="Sr+_secondfull"


Starter card is placed in smartreader+ called "Reader S". We will name it in linux OS "Sr+_starter"
Than this line must be placed in the file:
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="Reader S", SYMLINK+="Sr+_starter"


The USB ports will be reconnised after the changes like this:

/dev/Sr+_firstfull
/dev/Sr+_secondfull
/dev/Sr+_starter


------------------------

Example cccam
Normally the smartreader+ will be set like this:
/dev/ttyUSB0 smartreader+
/dev/ttyUSB1 smartreader+
/dev/ttyUSB2 smartreader+
(which one is a full card and which one is starter card?? You allways need to control it and adjust settings or change cards in smartreader)

We given the smartreader+ a name so when use loadbalance or different frequency must be used than we always know we set the right smartreader+.
After reboot, replacement of smartreader+ or other interuption you allways know that the right smartcardreader+ is set in right mode.

This is what you place now in cccam:
/dev/Sr+_firstfull smartreader+
/dev/Sr+_secondfull smartreader+
/dev/Sr+_starter smartreader+

Example: Set frequence, loadbalance
SMARTCARD CLOCK FREQUENCY: /dev/Sr+_firstfull 80000000
SMARTCARD CLOCK FREQUENCY: /dev/Sr+_secondfull 80000000
SMARTCARD CLOCK FREQUENCY: /dev/Sr+_starter 60000000
LOADBALANCE : /dev/Sr+_firstfull /dev/Sr+_secondfull