Boot problem on VTI 5.0.0

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Boot problem on VTI 5.0.0

      Hi!

      Very often when i reboot the VTI (5.0.0 but that was the same problem with older versions) the booting process don't go until the end.
      Sometimes the display shows the word "starting" permanently and the remote does not work.
      I need several trials until the booting process be Ok.

      What kind of info (log) can i bring here to see what is going wrong?

      Thank you

      Regards,

      Knasson

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von knasson ()

    • Do you use an USB flash memory at your box ? --> I think, yes :)

      a)
      Please use devicemanager and initialise your usb device using the 1%/99% partition scheme.

      After this you have to format the 1% partition with filesystem fat (you can do this also with devicemanager). After that mount the large partition as /media/usb


      or


      b)
      Change the filesystem of the whole USB device to fat
    • I dont know what you call "use usb flash memory..." I use a memory stick for the memory swap but i think this has nothing to see with what you are pointing out.
      here a the result of df -m
      Filesystem 1M-blocks Used Available Use% Mounted on
      ubi0:rootfs 102 84 17 83% /
      udev 2 0 2 4% /dev
      /dev/mtdblock2 2 0 2 19% /boot
      tmpfs 68 1 67 1% /var
      tmpfs 68 0 67 0% /tmp
      tmpfs 68 0 68 0% /dev/shm
      /dev/sda1 476792 321874 154918 68% /media/hdd
      /dev/sdb1 1817 259 1558 14% /media/usb1

      Regards

      Knasson