Hello, The tuner does show up but when tryin to scan new channels it finds 0 channels.
I have installed: kernel-module-dvb-usb-anysee - 3.1.1-r18 - dvb-usb-anysee kernel module; Driver Anysee E30 DVB-C & DVB-T USB2.0

From dmesg:
dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Anysee DVB USB2.0)
anysee: firmware version:2.1 hardware id:2
DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)...
DVB: Unable to find symbol dvb_pll_attach()
Registered IR keymap rc-anysee
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/1-2.4/rc/rc0/input1
rc0: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/1-2.4/rc/rc0
dvb-usb: schedule remote query interval to 250 msecs.
dvb-usb: Anysee DVB USB2.0 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_anysee
DVB: registering adapter 0 frontend 0 (Zarlink MT352 DVB-T)...

usb 1-2.4: USB disconnect, device number 5
dvb-usb: bulk message failed: -19 (64/0)
mt352_write() to reg 89 failed (err = -19)!

FE tune
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
FE tune

lsmod:

root@bm750:~# lsmod
Tainted: P
fuse 74978 2 - Live 0xc1122000
mt352 5381 1 - Live 0xc10fe000
dvb_usb_anysee 9935 2 - Live 0xc0fc5000
dvb_usb 16346 1 dvb_usb_anysee, Live 0xc0fb7000
brcmfb 1127 2 - Live 0xc0faa000
dvb_bcm7335 4939211 27 brcmfb, Live 0xc0701000 (P)
procmk 1397 1 dvb_bcm7335, Live 0xc018d000

root@bm750:~# cat /proc/bus/nim_sockets
NIM Socket 0:
Type: DVB-S2
Name: BCM7335 DVB-S2 NIM (internal)
Frontend_Device: 0
NIM Socket 1:
Type: DVB-S2
Name: BCM7335 DVB-S2 NIM (internal)
Frontend_Device: 1

NIM Socket 2:
Type: DVB-T
Name: anysee-T(LP)
Frontend_Device: 2root@bm750:~#

/var/log/messages after an unplug/plug of the usb-cable:

Jan 1 14:30:39 bm750 user.info kernel: usb 2-1: USB disconnect, device number 2
Jan 1 14:30:39 bm750 user.info kernel: dvb-usb: Anysee DVB USB2.0 successfully deinitialized and disconnected.
Jan 1 14:30:44 bm750 user.info kernel: usb 1-2.4: new high speed USB device number 6 using ehci-brcm
Jan 1 14:30:46 bm750 user.warn kernel: usb 1-2.4: config 1 interface 0 altsetting 0 bulk endpoint 0x1 has invalid maxpacket 64
Jan 1 14:30:46 bm750 user.warn kernel: usb 1-2.4: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 64
Jan 1 14:30:46 bm750 user.warn kernel: usb 1-2.4: config 1 interface 0 altsetting 1 bulk endpoint 0x1 has invalid maxpacket 64
Jan 1 14:30:46 bm750 user.warn kernel: usb 1-2.4: config 1 interface 0 altsetting 1 bulk endpoint 0x81 has invalid maxpacket 64
Jan 1 14:30:46 bm750 user.info kernel: dvb-usb: found a 'Anysee DVB USB2.0' in warm state.
Jan 1 14:30:46 bm750 user.info kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Jan 1 14:30:46 bm750 user.info kernel: DVB: registering new adapter (Anysee DVB USB2.0)
Jan 1 14:30:46 bm750 user.info kernel: anysee: firmware version:2.1 hardware id:2
Jan 1 14:30:46 bm750 user.warn kernel: DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)...
Jan 1 14:30:46 bm750 user.err kernel: DVB: Unable to find symbol dvb_pll_attach()
Jan 1 14:30:46 bm750 user.info kernel: Registered IR keymap rc-anysee
Jan 1 14:30:46 bm750 user.info kernel: input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/1-2.4/rc/rc2/input3
Jan 1 14:30:46 bm750 user.info kernel: rc2: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-2/1-2.4/rc/rc2
Jan 1 14:30:46 bm750 user.info kernel: dvb-usb: schedule remote query interval to 250 msecs.
Jan 1 14:30:46 bm750 user.info kernel: dvb-usb: Anysee DVB USB2.0 successfully initialized and connected.