Power of Dreams HD+ 2.0.6 (POD HD+) CrossEPG Edition for Vu+ Duo
14/10/2011
We are pleased to offer for POD HD + Vuplus Duo, Solo Uno and now in version 2.0.6.
- Based on the generation '6 'official images
- Requires an update of the bootloader on Duo
Main new feature:
- Added a web browser plugin (except solo)
- Added a plugin for precise placement of the UI to fit your HDTV (overscan ... Wink
- Added a plugin for managing 3D menus
20111006
- Improve DVB-C / T tuning (uno)
- Fix incorrect display of DVB-C / T SNR / AGC (uno)
- Fix problem in high-bitrate CI (uno, needs a FPGA update, New Rev 4.2 FPGA image iz at archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add UI interface for setup position
- Add redundant FPGA device at / dev (uno)
- Add ioctl for hdmi_cec (get physical / logical addr.)
- Fix mute Audo in pass-through (uno)
- Add interface to set the system code of the remote control (uno)
- Add interface to disable REC icon VFD (uno, duo)
- Add interface to control the overall alpha
Please note, the transition from 2.0.5 to 2.0.6 can be done by re-flashing your set top box, no updates online possible.
WARNING: user POD HD with DUO
From the next version of the POD HD, you MUST use a new bootloader. To do this:
- Download the bootloader: archive.vuplus.com/image/2011/6.0/duo_cfe_3_0_usb.zip
- Unzip the contents of the key to obtain the following chemain: / vuplus / duo / cfe_cfe_auto.bin
- Turn off the duo
- Put the stick in the duo's post
- Turn the duo
- The update is very fast and as "Finished .. reboot" appears, you can remove the key and restart the duo
- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update
Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos
In der DB zu finden
14/10/2011
We are pleased to offer for POD HD + Vuplus Duo, Solo Uno and now in version 2.0.6.
- Based on the generation '6 'official images
- Requires an update of the bootloader on Duo
Main new feature:
- Added a web browser plugin (except solo)
- Added a plugin for precise placement of the UI to fit your HDTV (overscan ... Wink
- Added a plugin for managing 3D menus
20111006
- Improve DVB-C / T tuning (uno)
- Fix incorrect display of DVB-C / T SNR / AGC (uno)
- Fix problem in high-bitrate CI (uno, needs a FPGA update, New Rev 4.2 FPGA image iz at archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add UI interface for setup position
- Add redundant FPGA device at / dev (uno)
- Add ioctl for hdmi_cec (get physical / logical addr.)
- Fix mute Audo in pass-through (uno)
- Add interface to set the system code of the remote control (uno)
- Add interface to disable REC icon VFD (uno, duo)
- Add interface to control the overall alpha
Please note, the transition from 2.0.5 to 2.0.6 can be done by re-flashing your set top box, no updates online possible.
WARNING: user POD HD with DUO
From the next version of the POD HD, you MUST use a new bootloader. To do this:
- Download the bootloader: archive.vuplus.com/image/2011/6.0/duo_cfe_3_0_usb.zip
- Unzip the contents of the key to obtain the following chemain: / vuplus / duo / cfe_cfe_auto.bin
- Turn off the duo
- Put the stick in the duo's post
- Turn the duo
- The update is very fast and as "Finished .. reboot" appears, you can remove the key and restart the duo
- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update
Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos
In der DB zu finden
War doch immer über die blaue Taste oder bei den Erweiterungen zu erreichen.