Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vu+ Duo

13-10-2011

Changes:

Update the image at the official image 6.0

Open Embedded
- Add WebBrowser plugin(Duo needs a bootloader update)
- Add UI postion control plugin
- Add 3D framebuffer control plugin
- Add remote control system code control plugin

- For details, please take a loot at git log.

Driver update

20111006
- improve DVB-C/T tuning(uno)
- Fix incorrect display of DVB-C/T SNR/AGC(uno)
- Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.2 FPGA image is at archive.vuplus.com/download/fpga/vuuno/4.2/)
- Support 3D framebuffer
- Add interface for UI position setup
- Add redundant fpga device at /dev (uno)
- Add ioctl for hdmi_cec(get physical/logical addr.)
- Fix audo mute in pass-through(uno)
- Add interface to set the system code of the remote control(uno)
- Add interface to disable REC VFD icon(uno,duo)
- Add interface to control global alpha

WARNING: user POD HD with DUO

From the next version of the POD HD, you MUST use a new bootloader. To do this:

-Download the bootloader:
- Unzip attached file
- Format USB flash drive in with fat
- Create directory /vuplus/duo at flash drive
- Copy file to directoy /vuplus/duo at flash drive
- Shutdown VU+ STB
- Disconnect all USB devices
- Connect USB flash drive to VU+ STB
- Power on VU+ STB
- Wait for message "Please remove USB" at VFD
- Disconnect USB flash drive
- Power off VU+ STB
- Flash new image

- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update


Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos


In der DB zu finden