Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vu+ Duo 13-10-11

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vu+ Duo 13-10-11

      Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vu+ Duo

      13-10-2011

      Changes:

      Update the image at the official image 6.0

      Open Embedded
      - Add WebBrowser plugin(Duo needs a bootloader update)
      - Add UI postion control plugin
      - Add 3D framebuffer control plugin
      - Add remote control system code control plugin

      - For details, please take a loot at git log.

      Driver update

      20111006
      - improve DVB-C/T tuning(uno)
      - Fix incorrect display of DVB-C/T SNR/AGC(uno)
      - Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.2 FPGA image is at archive.vuplus.com/download/fpga/vuuno/4.2/)
      - Support 3D framebuffer
      - Add interface for UI position setup
      - Add redundant fpga device at /dev (uno)
      - Add ioctl for hdmi_cec(get physical/logical addr.)
      - Fix audo mute in pass-through(uno)
      - Add interface to set the system code of the remote control(uno)
      - Add interface to disable REC VFD icon(uno,duo)
      - Add interface to control global alpha

      WARNING: user POD HD with DUO

      From the next version of the POD HD, you MUST use a new bootloader. To do this:

      -Download the bootloader:
      - Unzip attached file
      - Format USB flash drive in with fat
      - Create directory /vuplus/duo at flash drive
      - Copy file to directoy /vuplus/duo at flash drive
      - Shutdown VU+ STB
      - Disconnect all USB devices
      - Connect USB flash drive to VU+ STB
      - Power on VU+ STB
      - Wait for message "Please remove USB" at VFD
      - Disconnect USB flash drive
      - Power off VU+ STB
      - Flash new image

      - Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update


      Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
      Note 2: this is only for the duo, not solo or unos


      In der DB zu finden ;)