User einrichten für die Festplatte meiner Uno.

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • User einrichten für die Festplatte meiner Uno.

      Hallo
      Ich habe eine Frage.
      Wie kann mann nur einen Ortner mit unterortner einem User zuweisen mit passwort und user Anmeldung.

      Mein vorhaben ist. Ich habe 3 Schwager die verteil sind in der ganzen welt und wir greifen alle auf meine festplate um uns fotos Aus zu tauschen.
      Wie kann ich ihnen nur einen bestimten ortner zuweisen.

      Vielen dank im voraus.

    • Hi xkinix,

      mach das am besten mit dem FTP-Sever (vsftpd) der Box.
      Die vsftpd.conf die m /etc Verzeichnis liegt muss angepasst werden.

      Gruß FUKKEL
      "Das Geheimnis des Könnens liegt im Wollen." Giuseppe Mazzini Eigentlich wollte ich mich mit Dir geistig duellieren.........aber ich sehe Du bist unbewaffnet.
      >>> TOP Infos hier: <<<
      Wissen heißt wissen, wo es geschrieben steht. Albert Einstein

    • Hallo
      was mus ich einschlten um einen user "test" mit einem Verzeichnis "meine Dateien"einzurichten?
      Bitte um hilfe.

      Quellcode

      1. # Vuplus /etc/vsftpd.conf
      2. #
      3. # Please see vsftpd.conf.5 for all compiled in defaults.
      4. #
      5. # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
      6. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
      7. # capabilities.
      8. #
      9. # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
      10. anonymous_enable=NO
      11. #
      12. # Uncomment this to allow local users to log in.
      13. local_enable=YES
      14. #
      15. # Uncomment this to enable any form of FTP write command.
      16. write_enable=YES
      17. #
      18. # Default umask for local users is 077. You may wish to change this to 022,
      19. # if your users expect that (022 is used by most other ftpd's)
      20. #local_umask=022
      21. #
      22. # Uncomment this to allow the anonymous FTP user to upload files. This only
      23. # has an effect if the above global write enable is activated. Also, you will
      24. # obviously need to create a directory writable by the FTP user.
      25. #anon_upload_enable=YES
      26. #
      27. # Uncomment this if you want the anonymous FTP user to be able to create
      28. # new directories.
      29. #anon_mkdir_write_enable=YES
      30. #
      31. # Activate directory messages - messages given to remote users when they
      32. # go into a certain directory.
      33. dirmessage_enable=YES
      34. #
      35. # Activate logging of uploads/downloads.
      36. #xferlog_enable=YES
      37. #
      38. # Make sure PORT transfer connections originate from port 20 (ftp-data).
      39. connect_from_port_20=YES
      40. #
      41. # If you want, you can arrange for uploaded anonymous files to be owned by
      42. # a different user. Note! Using "root" for uploaded files is not
      43. # recommended!
      44. #chown_uploads=YES
      45. #chown_username=whoever
      46. #
      47. # You may override where the log file goes if you like. The default is shown
      48. # below.
      49. #xferlog_file=/var/log/vsftpd.log
      50. #
      51. # If you want, you can have your log file in standard ftpd xferlog format
      52. #xferlog_std_format=YES
      53. #
      54. # You may change the default value for timing out an idle session.
      55. #idle_session_timeout=600
      56. #
      57. # You may change the default value for timing out a data connection.
      58. #data_connection_timeout=120
      59. #
      60. # It is recommended that you define on your system a unique user which the
      61. # ftp server can use as a totally isolated and unprivileged user.
      62. #nopriv_user=ftpsecure
      63. #
      64. # Enable this and the server will recognise asynchronous ABOR requests. Not
      65. # recommended for security (the code is non-trivial). Not enabling it,
      66. # however, may confuse older FTP clients.
      67. async_abor_enable=YES
      68. #
      69. # By default the server will pretend to allow ASCII mode but in fact ignore
      70. # the request. Turn on the below options to have the server actually do ASCII
      71. # mangling on files when in ASCII mode.
      72. # Beware that turning on ascii_download_enable enables malicious remote parties
      73. # to consume your I/O resources, by issuing the command "SIZE /big/file" in
      74. # ASCII mode.
      75. # These ASCII options are split into upload and download because you may wish
      76. # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
      77. # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
      78. # on the client anyway..
      79. #ascii_upload_enable=YES
      80. #ascii_download_enable=YES
      81. #
      82. # You may fully customise the login banner string:
      83. ftpd_banner=Welcome to the Vuplus FTP service.
      84. #
      85. # You may specify a file of disallowed anonymous e-mail addresses. Apparently
      86. # useful for combatting certain DoS attacks.
      87. #deny_email_enable=YES
      88. # (default follows)
      89. #banned_email_file=/etc/vsftpd.banned_emails
      90. #
      91. # You may specify an explicit list of local users to chroot() to their home
      92. # directory. If chroot_local_user is YES, then this list becomes a list of
      93. # users to NOT chroot().
      94. #chroot_list_enable=YES
      95. # (default follows)
      96. #chroot_list_file=/etc/vsftpd.chroot_list
      97. #
      98. # You may activate the "-R" option to the builtin ls. This is disabled by
      99. # default to avoid remote users being able to cause excessive I/O on large
      100. # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
      101. # the presence of the "-R" option, so there is a strong case for enabling it.
      102. ls_recurse_enable=YES
      103. #
      104. secure_chroot_dir=/dev/shm
      105. local_root=/
      106. # If enabled, vsftpd will display directory listings with the time in your
      107. # local time zone. The default is to display GMT. The times returned by the
      108. # MDTM FTP command are also affected by this option.
      109. use_localtime=YES
      Alles anzeigen