JSC Sports 0603 IrdetoII Card(ver 5)

sami8519 · 4. März 2010, 21:56

Hi,

I have this card and tried to make it work using CCcam Emu but to no avail. The card get recognized in the CCcam and send EMM but always bad ECM. After 2 hours of trial, I put the card on DM500s and it worked straight away using same version of CCcam 2.1.4 and same CCcam.cfg. I tried this on VTI 0.5 and on dream-Elite Black Hole with same result. I guess it is the Vu+ Duo fault. Anybody can confirm this with this card or with Irdeto ver 5 in general. Thanks.

Regards.

RealMagic911 · 4. März 2010, 21:58

Change back to vti 0.4 and check if it works. There seems to be ab bug even in the current original fimrware. Older firmwares (vti 0.4 or original 3.2) are working.

sami8519 · 4. März 2010, 22:09

but I thought that BH image is based on VTI 0.4 image, or do I need to try VTI image 0.4?

Thanks.

malakudi · 4. März 2010, 22:21

No, Blackhole also has the latest drivers. Try VTI 0.4 and it will work. Let's hope for a quick fix on this, because all newer images use latest drivers.

RealMagic911 · 4. März 2010, 22:24

Original von sami8519
but I thought that BH image is based on VTI 0.4 image, or do I need to try VTI image 0.4?

Thanks.

Try VTI 0.4, because the current Elite Images is based on Original Firmware V4.0. This already contains the bug.

sami8519 · 4. März 2010, 22:25

Originally posted by malakudi
No, Blackhole also has the latest drivers. Try VTI 0.4 and it will work. Let's hope for a quick fix on this, because all newer images use latest drivers.

Thanks, will try it now.

sami8519 · 4. März 2010, 22:40

I put the VTI 0.4 in a USB stick and booted it up using meoboot then I tried the card with CCcam 2.1.4 and the same result, card did not decode the channels.

card reader /dev/sci1
handled 21(0) ecms and 2(2) emms
Irdeto card
Caid 603 ACS 1542 QAT
Cardserial XXXXXXXXXXXXXXXX (XXXXXX)
Provider 00 0bb45e
Provider 01 000a00
Provider 02 000b00
Provider 03 000c00
Chid 0004 - date 0xe6b valid 0xfe

RealMagic911 · 4. März 2010, 22:41

Put VTI0.4 to flash. With a newer Image in flash and an older on stickt you are not using the correct drivers.

sami8519 · 4. März 2010, 22:45

Originally posted by RealMagic911
Put VTI0.4 to flash. With a newer Image in flash and an older on stickt you are not using the correct drivers.

OK thanks for the info mate. Some hope is back :tongue:

BigGyros · 4. März 2010, 22:58

I think you have the wrong CCcam.cfg

Its an Irdeto Card and it needs a camkey and
some other values.

here for you :

SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 8000000
CAMKEY : /dev/ttyUSB0 00 00 00 00 00 00 00 00
CAMDATA : /dev/ttyUSB0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

change reader to sci0 if its internal

RealMagic911 · 4. März 2010, 23:01

@biggyros
Have you tested this card with current vti 0.5? I ask, because there were some reports of broken irdeto chids causing cccam to work not properbly since vti 0.5 or original firmware 4.0.

BigGyros · 4. März 2010, 23:08

not this sorry .. but he can try with this have only nova caid 0604 ... will try it tomorrow

stauffie · 4. März 2010, 23:10

handled 70546(64459) ecms and 8(8) emms
Irdeto card
Caid 622 ACS 505
Cardserial *******************
Provider 00 01309d
Provider 01 ffffff

here is my irdeto 2 card from holland with cccam 2011

Sicilian · 5. März 2010, 07:42

Originally posted by stauffie
handled 70546(64459) ecms and 8(8) emms
Irdeto card
Caid 622 ACS 505
Cardserial *******************
Provider 00 01309d
Provider 01 ffffff

here is my irdeto 2 card from holland with cccam 2011

What image are you using?

stauffie · 5. März 2010, 08:40

latest VTI

RealMagic911 · 5. März 2010, 08:53

This also means, that not all irdeto cards are effected by the chid bug.

malakudi · 5. März 2010, 10:08

Originally posted by RealMagic911
This also means, that not all irdeto cards are effected by the chid bug.

That is true, in my bug report the greek irdeto provider Nova sends four to six different ecm packets per channel. Each packet is a different CHID. Latest VU+ drivers drop 2 out of 3 of these packets, so if the ECM packet for the CHID that your subscription card can decode is dropped, then you can't watch the channel.

@RealMagic911: do we have any status report on this issue from the VU+ driver developers? I am checking everyday ... for an updated image

RealMagic911 · 5. März 2010, 10:10

Not until now.

sami8519 · 5. März 2010, 18:15

After Flashing to VTI 0.4, Card is working perfectly. Thanks for all people helped me.

Regards
Sami.

RealMagic911 · 5. März 2010, 18:18

Thank you for reporting and testing. That is important to fix this issues in upcoming releases.