USB Stick geht nach reboot immer verloren

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • USB Stick geht nach reboot immer verloren

      Hallo!

      Ich habe einen SanDisk USB Stick in meiner Box drin, und jedes Mal, wenn ich einen reboot der Box mache, dann ist der Stick im Gerätemanager nicht mehr sichtbar, ich muss den Stick an abstecken und wieder anstecken damit er wieder sichtbar ist und wieder eingehängt werden kann.

      Ich habe auf de Box das aktuelle VTI 15 installiert, es war aber auch schon mit dem aktuellen VTI 14 so. Ist das normal das nach dem reboot der Stick nicht mehr dan ist? Eher nicht, oder?

    • Du meinst das untere? Sehe ich gerade zum ersten Mal diese Funktion und habe ich dann wohl bei allen anderen Boxen die ich eingerichtet habe inkl. Meiner ultimo 4K wohl auch nicht aktiv. Bei der Festplatte ist das auch nicht aktiv und die ist immer da und bleibt auch nach einem reboot oder bei Stromlos.

      6F9620E2-216C-42F4-999E-C0D7EEC92104.png

    • SanDisk Ultra USB 3.0 64 GB

      Edit: Nun habe ich ein billigen Stick den ich mal als Werbegeschenk erhalten habe eingesteckt, und der bleibt drin, egal wie oft ich einen reboot mache.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von LevelOne2k ()

    • Absolut komisch. Habe ansonsten nur SanDisk Sticks und in meiner Zero 4K und Ultimo 4K auch SanDisk (welches Modell jetzt genau, keine Ahnung) und da gibt es keine Probleme.

      Welche Box hast du denn?

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von LevelOne2k ()

    • zeig mal die /var/log/messages
      und /etc/devicemanager.cfg
      und die Ausgabe von ls -lah /dev/disk/by-uuid
      und die Ausgabe von lsusb
      nach dem Reboot
      Rechtschreibfehler sind beabsichtigt, sie fördern ein genaueres Lesen
      Debug Log aktivieren Putty Telnet Screenshots erstellen

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von hajeku123 ()

    • Spoiler anzeigen
      Oct 2 13:37:07 vuuno4kse syslog.info syslogd started: BusyBox v1.23.2
      Oct 2 13:37:07 vuuno4kse user.notice kernel: klogd started: BusyBox v1.23.2 (2019-03-05 16:38:19 CET)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] Linux version 4.1.20-1.9 (vti@build-vti) (gcc version 4.9.2 (GCC) ) #1 SMP Thu Sep 10 18:04:56 CEST 2020
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Machine model: UNO4KSE
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] moving dtb from 0x0000000007628000 to 0x00000000008ecc2c
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] bmem: Reserved 641 MiB at 0x0000000015e00000
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] bmem: Reserved 641 MiB at 0x0000000097e00000
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] cma: Reserved 16 MiB at 0x0000000096c00000
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 0.000000] Forcing write-allocate cache policy for SMP
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Memory policy: Data cache writealloc
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] On node 0 totalpages: 516096
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] DMA zone: 684 pages used for memmap
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] DMA zone: 0 pages reserved
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] DMA zone: 87552 pages, LIFO batch:15
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] HighMem zone: 428544 pages, LIFO batch:31
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] PERCPU: Embedded 12 pages/cpu @d45ac000 s16896 r8192 d24064 u49152
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] pcpu-alloc: s16896 r8192 d24064 u49152 alloc=12*4096
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515412
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 rootflags=data=journal rootwait rw coherent_pool=2M vmalloc=666m bmem=641m@350m bmem=641m@2430m
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Memory: 708148K/2064384K available (6221K kernel code, 299K rwdata, 2068K rodata, 308K init, 199K bss, 1339852K reserved, 16384K cma-reserved, 383972K highmem)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] Virtual kernel memory layout:
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] vmalloc : 0xd5800000 - 0xff000000 ( 664 MB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xd5600000 ( 342 MB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc0820bdc (8291 kB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] .init : 0xc0821000 - 0xc086e000 ( 308 kB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] .data : 0xc086e000 - 0xc08b8dd8 ( 300 kB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.000000] .bss : 0xc08bb000 - 0xc08ecc2c ( 200 kB)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Hierarchical RCU implementation.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] NR_IRQS:16 nr_irqs:16 16
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5802000, parent irq: 93)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd5808000, parent irq: 64)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580aa00, parent irq: 65)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580c640, parent irq: 95)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xd580e200, parent irq: 58)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xd5810380, parent IRQ(s): 3)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] MCP: Enabling write pairing
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000010] Switching to timer-based delay loop, resolution 37ns
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000341] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000350] pid_max: default: 32768 minimum: 301
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000447] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000452] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.000885] CPU: Testing write buffer coherency: ok
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.001093] CPU0: update cpu_capacity 1024
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.001100] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.001302] Setting up static identity map for 0x8480 - 0x84d8
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.003826] CPU1: update cpu_capacity 1024
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.003829] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.003886] Brought up 2 CPUs
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.003896] SMP: Total of 2 processors activated (108.00 BogoMIPS).
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.003900] CPU: All CPU(s) started in SVC mode.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.004252] devtmpfs: initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.013181] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.013390] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.014646] NET: Registered protocol family 16
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.016071] DMA: preallocated 2048 KiB pool for atomic coherent allocations
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.023264] cpuidle: using governor ladder
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.029277] cpuidle: using governor menu
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.036245] No ATAGs?
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.036276] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.036284] hw-breakpoint: maximum watchpoint size is 8 bytes.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.036508] Broadcom Brahma-B15 readahead cache at: 0xd5b14478
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.049040] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.049315] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.049764] SCSI subsystem initialized
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.049942] libata version 3.00 loaded.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050113] usbcore: registered new interface driver usbfs
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050147] usbcore: registered new interface driver hub
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050177] usbcore: registered new device driver usb
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050232] Linux video capture interface: v2.00
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050290] pps_core: LinuxPPS API ver. 1 registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050293] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050310] PTP clock support registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.050631] Advanced Linux Sound Architecture Driver Initialized.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.052383] Switched to clocksource arch_sys_counter
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.052589] FS-Cache: Loaded
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 0.053911] thermal thermal_zone0: failed to read out thermal zone (-22)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054001] NET: Registered protocol family 2
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054364] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054387] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054425] TCP: Hash tables configured (established 4096 bind 4096)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054465] UDP hash table entries: 256 (order: 1, 8192 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054476] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054575] NET: Registered protocol family 1
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054765] RPC: Registered named UNIX socket transport module.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054773] RPC: Registered udp transport module.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054779] RPC: Registered tcp transport module.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.054783] RPC: Registered tcp NFSv4.1 backchannel transport module.
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 0.054803] PCI: CLS 0 bytes, default 64
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 0.055089] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.055116] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.055955] futex hash table entries: 512 (order: 3, 32768 bytes)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.056915] NFS: Registering the id_resolver key type
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.056943] Key type id_resolver registered
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 0.056946] Key type id_legacy registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.056959] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.056965] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.058108] bounce: pool size: 64 pages
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.058159] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.058170] io scheduler noop registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.058178] io scheduler deadline registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.058200] io scheduler cfq registered (default)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.058451] brcm-gisb-arb f0400000.gisb-arb: registered mem: d5b3c000, irqs: 261, 262
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.059175] brcmstb-sata-phy f0458100.sata_phy: registered 2 port(s)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.059582] brcm-pci f0460000.pcie: adjusting to legacy (broken) pcie DT
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 0.059631] brcm-pci f0460000.pcie: no identity map; PCI drivers may fail
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.159768] brcm-pci f0460000.pcie: link down
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.159816] brcm-pci f0490000.pcie: adjusting to legacy (broken) pcie DT
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 0.159855] brcm-pci f0490000.pcie: no identity map; PCI drivers may fail
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.259987] brcm-pci f0490000.pcie: link down
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.261341] brcmstb_memc f1102000.memc-ddr: registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.261398] brcmstb_memc f1182000.memc-ddr: registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.261591] brcm-waketimer f0417580.waketimer: registered, with irq 263
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.261800] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.262913] console [ttyS0] disabled
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.262938] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.993947] console [ttyS0] enabled
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 0.997783] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 108, base_baud = 5062500) is a 16550A
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.007026] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 109, base_baud = 5062500) is a 16550A
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.019377] loop: module loaded
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.023366] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 0
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.029922] brcmstb-sata-phy f0458100.sata_phy: enabling SSC on port 1
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.036493] brcm-ahci f045a000.sata: controller can do ALPM, turning on CAP_ALPM
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 1.043906] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x3
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.049950] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.067373] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.076354] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.086039] scsi host0: brcm-ahci
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.089606] scsi host1: brcm-ahci
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.093085] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.101018] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.108954] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.116101] brcmstb_qspi f03e3400.spi: using bspi-mspi mode
      Oct 2 13:37:07 vuuno4kse user.err kernel: [ 1.121746] brcmstb_qspi f03e3400.spi: IRQ spi_l1_intr not found
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 1.127781] brcmstb_qspi: probe of f03e3400.spi failed with error -22
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.134260] brcmstb_qspi f03e0920.qspi: using bspi-mspi mode
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 1.140418] m25p80 spi32766.0: found mx25l3255e, expected m25p80
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.146446] m25p80 spi32766.0: mx25l3255e (4096 Kbytes)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.151707] 5 ofpart partitions found on MTD device spi32766.0
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.157552] Creating 5 MTD partitions on "spi32766.0":
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.162701] 0x000000000000-0x000000200000 : "flash0.bolt"
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.168619] 0x000000200000-0x000000210000 : "flash0.macadr"
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.174631] 0x000000210000-0x000000220000 : "flash0.nvram"
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.180547] 0x000000220000-0x000000230000 : "flash0.devtree"
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.186632] 0x000000000000-0x000000400000 : "flash0"
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.192675] libphy: Fixed MDIO Bus: probed
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.197205] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 1.203104] bcmgenet f0b00000.ethernet: failed to get enet-mux clock
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.222355] libphy: bcmgenet MII bus: probed
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.247172] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.253024] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.259145] xhci-brcm: xHCI BRCM driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.277847] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.283627] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.291751] xhci-brcm f0471000.xhci_v2: hcc params 0x0250f17d hci version 0x100 quirks 0x00010090
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.300660] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.307299] hub 1-0:1.0: USB hub found
      Oct 2 13:37:07 vuuno4kse user.err kernel: [ 1.311086] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.318362] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.324122] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.332014] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.340463] hub 2-0:1.0: USB hub found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.344246] hub 2-0:1.0: 2 ports detected
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.348628] ehci-brcm: EHCI BRCM driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.352588] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.358374] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.376377] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.383368] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.388367] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.388797] hub 3-0:1.0: USB hub found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.388820] hub 3-0:1.0: 1 port detected
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.389091] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.389194] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.399319] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.404358] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.404800] hub 4-0:1.0: USB hub found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.404839] hub 4-0:1.0: 1 port detected
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.405162] ohci-brcm: OHCI BRCM driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.405261] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.405415] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.405503] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.459911] hub 5-0:1.0: USB hub found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.459947] hub 5-0:1.0: 1 port detected
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.460198] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.460304] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.460429] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.493930] ata1.00: ATA-8: SAMSUNG HM641JI, 2AJ10001, max UDMA/133
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.500217] ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.511725] hub 6-0:1.0: USB hub found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.515541] hub 6-0:1.0: 1 port detected
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.519498] ata1.00: configured for UDMA/133
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.519812] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.519824] ehci-pci: EHCI PCI platform driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.519875] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.519883] ohci-pci: OHCI PCI platform driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.520020] usbcore: registered new interface driver usb-storage
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.520219] mousedev: PS/2 mouse device common for all mice
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.520582] i2c /dev entries driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521194] IR NEC protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521198] IR RC5(x/sz) protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521203] IR RC6 protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521208] IR JVC protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521213] IR Sony protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521218] IR SANYO protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521223] IR Sharp protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521227] IR MCE Keyboard/mouse protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521232] IR XMP protocol handler initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.521946] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.522558] brcmstb-cpufreq f03e257c.cpu_clk_div: registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.522766] sdhci: Secure Digital Host Controller Interface driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.522768] sdhci: Copyright(c) Pierre Ossman
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.522773] sdhci-pltfm: SDHCI platform and OF driver helper
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.524100] sdhci-brcmstb f03e0200.sdhci: No vmmc regulator found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.524103] sdhci-brcmstb f03e0200.sdhci: No vqmmc regulator found
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.554445] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.554690] usbcore: registered new interface driver usbhid
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.554691] usbhid: USB HID core driver
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.557283] NET: Registered protocol family 17
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.557433] Key type dns_resolver registered
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.557521] Registering SWP/SWPB emulation handler
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.566590] ALSA device list:
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.566593] No soundcards found.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.626995] mmc0: MAN_BKOPS_EN bit is not set
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.633263] mmc0: new high speed MMC card at address 0001
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.633580] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.633649] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.633703] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.633757] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.636422] mmcblk0: p1 p2 p3 p4
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.691361] usb 3-1: new high-speed USB device number 2 using ehci-brcm
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.724284] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM641JI 0001 PQ: 0 ANSI: 5
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.732884] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.740549] sd 0:0:0:0: Attached scsi generic sg0 type 0
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.740636] sd 0:0:0:0: [sda] Write Protect is off
      Oct 2 13:37:07 vuuno4kse user.debug kernel: [ 1.740641] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 1.740687] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 1.871365] ata2: SATA link down (SStatus 0 SControl 300)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.099475] sda: sda1
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 2.102395] sd 0:0:0:0: [sda] Attached SCSI disk
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 2.107485] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.124567] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.133484] VFS: Mounted root (ext4 filesystem) on device 179:4.
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.140103] devtmpfs: mounted
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.143218] Freeing unused kernel memory: 308K (c0821000 - c086e000)
      Oct 2 13:37:07 vuuno4kse daemon.info kernel: [ 2.340246] udevd[683]: starting version 182
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.500594] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 2.596827] random: dd urandom read with 63 bits of entropy available
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 2.742567] usbcore: registered new interface driver rtl8812au
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 2.881678] procmk_init
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 2.885629] bcm_event: module license 'Proprietary' taints kernel.
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 2.885638] Disabling lock debugging due to kernel taint
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 3.107291] nexus.ko: virtual irq: enabled (273)
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 3.107331] nexus.ko: shared gpio banks: enabled
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.179582] DVB: registering new adapter (_vuplus_uno4kse_)
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.480031] bcm7252s: hotplug_callback():
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.480031] Hotplug - status.connected 1:0:1
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.480048] bcm7252s: hotplug_callback():
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.480048] Hotplug - connecting HDMI to display 0xe
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.675361] brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.695969] [MPVR]: >> misc_pvr_init
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.697272] [VID]: ^A6bcm7335_video_init
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.726381] [AUD]: ^A6bcm7335_audio_init
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.726574] [AUD]: >> bcm_audio_capture_init
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.729396] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2ad7800 state=d1f8b000 config=bf944d58
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.742297] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.743000] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2c52000 state=d18a1800 config=bf944d60
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.752067] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.752586] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d2c52800 state=d18a1000 config=bf944d68
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.761739] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.762257] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d35a9000 state=d18a3800 config=bf944d70
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.771756] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.772319] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a61400 state=d18a3000 config=bf944d78
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.781929] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.783204] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a3cc00 state=d18ae800 config=bf944d80
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.792177] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.793491] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a5f800 state=d18ae000 config=bf944d88
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.802400] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.803529] fe_cap.qam : 0, fe_cap.ofd : 0, fe_cap.satellite:1 handle=d3a43000 state=d18af800 config=bf944d90
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.812632] BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.813779] bcm7252s: bcm7335_frontend_init(): vtuner1 : 9
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.830777] BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.831848] BKNI_Malloc(linuxkernel) top users:
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.831848] blocks, bytes, filename:line
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 6.831856] 1104, 237528, BSEAV/lib/utils/balloc.c:31
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.856591] input: dreambox advanced remote control (native) as /devices/virtual/input/input0
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 6.859768] [LCD]: registered
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 7.474406] [CI]: registered ci0
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 7.478778] [CI]: CI interface initialised
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 7.478778]
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 7.485424] [DFP]: registered dbox fp
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 7.488748] [SC]: registered sci0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 8.945356] system_time_set wakeup mode get
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.005356] system_time_set wakeup mode get 0xc1
      Oct 2 13:37:07 vuuno4kse user.notice kernel: [ 9.462610] random: nonblocking pool is initialized
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 9.627945] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.648594] [VID]: VIDEO_SET_STREAMTYPE 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.648608] [VID]: VIDEO_SELECT_SOURCE 1 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.648652] [VID]: VIDEO_PLAY 1 2 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.653967] [VID]: VIDEO_CONTINUE 1 1
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.653977] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.928979] [VID]: VIDEO_STOP 0 1
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 9.929879] [VID]: VIDEO_SELECT_SOURCE 0 0
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 10.532901] NET: Registered protocol family 10
      Oct 2 13:37:07 vuuno4kse user.info kernel: [ 10.534110] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Found user 'avahi' (UID 998) and group 'avahi' (GID 997).
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Successfully dropped root privileges.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: avahi-daemon 0.6.31 starting up.
      Oct 2 13:37:07 vuuno4kse daemon.warn avahi-daemon[1113]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Successfully called chroot().
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Successfully dropped remaining capabilities.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Loading service file /services/sftp-ssh.service.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Loading service file /services/ssh.service.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.191.30.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: New relevant interface wlan0.IPv4 for mDNS.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Network interface enumeration completed.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Registering new address record for 192.168.191.30 on wlan0.IPv4.
      Oct 2 13:37:07 vuuno4kse daemon.info avahi-daemon[1113]: Registering HINFO record with values 'ARMV7L'/'LINUX'.
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.148502] [VID]: VIDEO_SET_STREAMTYPE 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.148517] [VID]: VIDEO_SELECT_SOURCE 1 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.148561] [VID]: VIDEO_PLAY 1 2 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.153827] [VID]: VIDEO_CONTINUE 1 1
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.153835] [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.428039] [VID]: VIDEO_STOP 0 1
      Oct 2 13:37:07 vuuno4kse user.warn kernel: [ 11.428966] [VID]: VIDEO_SELECT_SOURCE 0 0
      Oct 2 13:37:08 vuuno4kse daemon.info avahi-daemon[1113]: Server startup complete. Host name is vuuno4kse.local. Local service cookie is 427854699.
      Oct 2 13:37:09 vuuno4kse daemon.info avahi-daemon[1113]: Service "vuuno4kse" (/services/ssh.service) successfully established.
      Oct 2 13:37:09 vuuno4kse daemon.info avahi-daemon[1113]: Service "vuuno4kse" (/services/sftp-ssh.service) successfully established.
      Oct 2 13:37:11 vuuno4kse user.info kernel: [ 14.878639] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
      Oct 2 13:37:13 vuuno4kse daemon.info avahi-daemon[1113]: Registering new address record for fe80::ea4e:6ff:fe6f:5d6c on wlan0.*.
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.027983] [AUD]: AUDIO_SET_MUTE 0
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.029138] [AUD]: AUDIO_SET_MIXER -776470896
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.029148] [AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.029152] [AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.029156] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.152195] [AUD]: AUDIO_SET_MIXER -776470896
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.152210] [AUD]: AUDIO_SET_MIXER : amixl 10, amixr 10
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.152214] [AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.152218] [AUD]: AUDIO_SET_MIXER : next left volume -784, right volume -784
      Oct 2 13:37:14 vuuno4kse user.warn kernel: [ 18.653775] FE tune
      Oct 2 13:37:15 vuuno4kse daemon.info avahi-daemon[1113]: Registering new address record for 2a02:908:233:de00:ea4e:6ff:fe6f:5d6c on wlan0.*.
      Oct 2 13:37:15 vuuno4kse daemon.info avahi-daemon[1113]: Withdrawing address record for fe80::ea4e:6ff:fe6f:5d6c on wlan0.
      Oct 2 13:37:15 vuuno4kse user.err kernel: [ 19.426316] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.433668] [AUD]: AUDIO_SELECT_SOURCE 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.433719] [AUD]: AUDIO_SET_BYPASS_MODE 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.433725] [AUD]: AC3 downmix 0 state : 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.433735] [AUD]: AUDIO_PAUSE -517999360
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.433743] [AUD]: AUDIO_PLAY -517999360 decoder start : 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.437750] [VID]: VIDEO_SELECT_SOURCE 0 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.437790] [VID]: VIDEO_SET_STREAMTYPE 1
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.437874] [VID]: VIDEO_FREEZE -517999360 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.437885] [VID]: VIDEO_PLAY -517999360 5 2
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.443095] [VID]: VIDEO_SLOWMOTION 0 1
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.443342] [VID]: VIDEO_FAST_FORWARD 0 1 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.443546] [VID]: VIDEO_CONTINUE -517999360 1
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.443564] [AUD]: AUDIO_CONTINUE -517999360 1 aph=0xd3935080
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.443569] [AUD]: Mute : 0
      Oct 2 13:37:15 vuuno4kse user.warn kernel: [ 19.444335] [AUD]: AUDIO_CHANNEL_SELECT 0
      Oct 2 13:37:18 vuuno4kse user.err kernel: [ 19.700458] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      Oct 2 13:37:18 vuuno4kse user.warn kernel: [ 19.707756] [VID]: VIDEO_SLOWMOTION 0 1
      Oct 2 13:37:18 vuuno4kse user.warn kernel: [ 19.707816] [VID]: VIDEO_FAST_FORWARD 0 1 0
      Oct 2 13:37:18 vuuno4kse user.warn kernel: [ 19.707838] [VID]: VIDEO_CONTINUE -517999360 1
      Oct 2 13:37:18 vuuno4kse user.warn kernel: [ 19.707851] [AUD]: AUDIO_CONTINUE -517999360 1 aph=0xd3935080
      Oct 2 13:37:18 vuuno4kse user.warn kernel: [ 19.707855] [AUD]: Mute : 0
      Oct 2 13:37:26 vuuno4kse user.warn kernel: [ 26.952779] [VID]: VIDEO_STOP 1 1
      Oct 2 13:37:26 vuuno4kse user.warn kernel: [ 26.952843] [AUD]: AUDIO_STOP -517999360
      Oct 2 13:37:26 vuuno4kse user.warn kernel: [ 26.979004] [AUD]: AUDIO_CONTINUE -517999360 0 aph=0x0
      Oct 2 13:37:26 vuuno4kse user.warn kernel: [ 26.979013] [AUD]: AUDIO_CONTINUE aph=0 0 0
      Oct 2 13:37:27 vuuno4kse user.err kernel: [ 28.203547] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.211018] [AUD]: AUDIO_SELECT_SOURCE 0
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.211188] [AUD]: AUDIO_SET_BYPASS_MODE 34
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.211198] [AUD]: DDP downmix 0 state : 0
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.211209] [AUD]: AUDIO_PAUSE -517999360
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.211219] [AUD]: AUDIO_PLAY -517999360 decoder start : 0
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.213717] [VID]: VIDEO_SELECT_SOURCE 0 0
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.213757] [VID]: VIDEO_SET_STREAMTYPE 7
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.213863] [VID]: VIDEO_FREEZE -517999360 0
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.213875] [VID]: VIDEO_PLAY -517999360 19 2
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.219189] [VID]: VIDEO_SLOWMOTION 0 1
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.219219] [VID]: VIDEO_FAST_FORWARD 0 1 0
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.219238] [VID]: VIDEO_CONTINUE -517999360 1
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.219249] [AUD]: AUDIO_CONTINUE -517999360 1 aph=0xd3985980
      Oct 2 13:37:27 vuuno4kse user.warn kernel: [ 28.219253] [AUD]: Mute : 0
      Oct 2 13:40:22 vuuno4kse authpriv.info dropbear[1301]: Child connection from 192.168.191.10:53505
      Oct 2 13:40:22 vuuno4kse authpriv.warn dropbear[1301]: Bad password attempt for 'root' from 192.168.191.10:53505
      Oct 2 13:40:23 vuuno4kse authpriv.warn dropbear[1301]: Bad password attempt for 'root' from 192.168.191.10:53505
      Oct 2 13:40:23 vuuno4kse authpriv.warn dropbear[1301]: Bad password attempt for 'root' from 192.168.191.10:53505
      Oct 2 13:40:24 vuuno4kse authpriv.info dropbear[1301]: Exit before auth (user 'root', 3 fails): Disconnect received
      Oct 2 13:40:37 vuuno4kse authpriv.info dropbear[1310]: Child connection from 192.168.191.10:53506
      Oct 2 13:40:37 vuuno4kse authpriv.notice dropbear[1310]: Password auth succeeded for 'root' from 192.168.191.10:53506
      Oct 2 13:40:37 vuuno4kse authpriv.warn dropbear[1311]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directory
      Oct 2 13:40:37 vuuno4kse authpriv.warn dropbear[1311]: lastlog_openseek: /var/log/lastlog is not a file or directory!
      Oct 2 13:41:11 vuuno4kse authpriv.info dropbear[1310]: Exit (root): Exited normally
      Oct 2 13:42:33 vuuno4kse authpriv.info dropbear[1376]: Child connection from 192.168.191.10:53507
      Oct 2 13:42:33 vuuno4kse authpriv.notice dropbear[1376]: Password auth succeeded for 'root' from 192.168.191.10:53507
      Oct 2 13:42:33 vuuno4kse authpriv.warn dropbear[1377]: lastlog_perform_login: Couldn't stat /var/log/lastlog: No such file or directory
      Oct 2 13:42:33 vuuno4kse authpriv.warn dropbear[1377]: lastlog_openseek: /var/log/lastlog is not a file or directory!
      Oct 2 13:43:28 vuuno4kse authpriv.info dropbear[1376]: Exit (root): Disconnect received


      devicemanager.cfg

      /media/hdd:09307da7-82d4-400f-ae80-f2e468aac3ce
      /media/usb:f945b0e9-98a0-4afc-bea4-49ffd26e33e5



      CFE19C36-0745-422A-9F9F-342FEDDFDB4B.jpeg

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von LevelOne2k ()

    • Nicht dein ernst, oder?
      Pack das in einen Spoiler.
      Die User die mit Handy im Forum sind werden es dir danken. ;)
      Gruß

      Jürgen

      _________

      DUO 4K       DVB-S2x FBC Unicable IDLU-32UL40-UNBOO-OPP
      UNO 4K SE DVB-S2x FBC DUR-Line UK 124
      SOLO 4K DVB-S2 FBC Unicable IDLU-32UL40-UNBOO-OPP

      VTi 15.0.0

      AX61 HD OpenATV 7.1



    • @LevelOne2k
      Datei entpacken und speichern unter /home/root

      dann ausführen:
      python /home/root/resetusb.py

      und davon die Ausgabe zeigen.
      Dateien

      • resetusb.zip

        (593 Byte, 2 mal heruntergeladen, zuletzt: )
      Rechtschreibfehler sind beabsichtigt, sie fördern ein genaueres Lesen
      Debug Log aktivieren Putty Telnet Screenshots erstellen

    • da fehlen noch zwei Zeilen in der Ausgabe
      Rechtschreibfehler sind beabsichtigt, sie fördern ein genaueres Lesen
      Debug Log aktivieren Putty Telnet Screenshots erstellen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von hajeku123 ()