Blindscan mit einem FBC-Sat-Tuner funktioniert nur, wenn Du zwei Kabel an den Tuner angeschlossen hast.
Also: Entweder zwei Legacy-Kabel oder, wenn Du Unicable benutzt, musst Du einen 2-fach Splitter in Dein Kabel einschleifen und dann die zwei Kabel vom Ausgang des Splitters an den FBC-Tuner anschließen.
Blindscan using an FBC satellite tuner will only work if you have two cables connected to the tuner.
So either two legacy cables or, if you are using Unicable, you must insert a 2-way splitter into your cable and then connect the two cables from the splitter output to the FBC tuner.
kan iemand mij vertellen hoe en wat
Also: Entweder zwei Legacy-Kabel oder, wenn Du Unicable benutzt, musst Du einen 2-fach Splitter in Dein Kabel einschleifen und dann die zwei Kabel vom Ausgang des Splitters an den FBC-Tuner anschließen.
Blindscan using an FBC satellite tuner will only work if you have two cables connected to the tuner.
So either two legacy cables or, if you are using Unicable, you must insert a 2-way splitter into your cable and then connect the two cables from the splitter output to the FBC tuner.
kan iemand mij vertellen hoe en wat