Equipment setup:
vu+ zero 4k DVB-T2, running VTi 14.0.5 and recently also VTi 14.0.6
NAS: WD My Cloud EX2, running the latest FW ver.
home LAN: built around a small Ubiquity router ER-X interconnects the zero 4k with the NAS by Ethernet cable on both sides.
Recording of TV programs by the mentioned zero 4k on the mentioned NAS through the mentioned home LAN interconnection works with no problems, replying of mentioned records from NAS by the zero 4k works successfully as well.
If one wants to delete any of such records on the NAS from the zero 4k/VTi, this always fails:
- files of the record on NAS (6 files alltogether) remain intact
- zero 4k starts to hang until infinit (i.e. until power OFF/ON by the switch on its rear panel):
- it shows all the time the graphic symbol of ongoing interaction with NAS through Ethernet interface - the flying 1-6 coloured boxes in the upper left corner on display
- receiver does not respond to any commands from the RCU
- just the live reception of the TV channel continues, but impossible to control anything (audio volume, channel change, start MENU, ...., NOTHING).
Deleting of the discussed recorded files on the NAS through whatever else works 100% (from PC via wired LAN, from iPad through WiFi access to the wired LAN, ...).
Some idea what might be wrong?
I mean first of all the main fork:
- is it a known bug in e.g. VTi14.0.5/VTi14.0.6 ?
- or
- could this problem be caused by some improper setting in either zero 4k receiver or in the WD NAS ?
Thanks.
vu+ zero 4k DVB-T2, running VTi 14.0.5 and recently also VTi 14.0.6
NAS: WD My Cloud EX2, running the latest FW ver.
home LAN: built around a small Ubiquity router ER-X interconnects the zero 4k with the NAS by Ethernet cable on both sides.
Recording of TV programs by the mentioned zero 4k on the mentioned NAS through the mentioned home LAN interconnection works with no problems, replying of mentioned records from NAS by the zero 4k works successfully as well.
If one wants to delete any of such records on the NAS from the zero 4k/VTi, this always fails:
- files of the record on NAS (6 files alltogether) remain intact
- zero 4k starts to hang until infinit (i.e. until power OFF/ON by the switch on its rear panel):
- it shows all the time the graphic symbol of ongoing interaction with NAS through Ethernet interface - the flying 1-6 coloured boxes in the upper left corner on display
- receiver does not respond to any commands from the RCU
- just the live reception of the TV channel continues, but impossible to control anything (audio volume, channel change, start MENU, ...., NOTHING).
Deleting of the discussed recorded files on the NAS through whatever else works 100% (from PC via wired LAN, from iPad through WiFi access to the wired LAN, ...).
Some idea what might be wrong?
I mean first of all the main fork:
- is it a known bug in e.g. VTi14.0.5/VTi14.0.6 ?
- or
- could this problem be caused by some improper setting in either zero 4k receiver or in the WD NAS ?
Thanks.