Vu+ Ultimo 4K blocked

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Vu+ Ultimo 4K blocked

      Hello
      I'm using a translator and I hope I can explain it to you.
      I have a problem with my ultimo 4K image vti 14.
      I wanted to try the LCD4Linux plugin and since I didn't like it I uninstalled it.
      But since the ultimo crashes at startup, the LCD remains black and on the tv screen I have the startup screen which flashes from time to time.
      But nothing to do for it to work.
      I tried to reflash the image (VTI) but I do not have on the lcd the message "press the power button" and therefore the flash cannot start. I tried to press anyway but it changes nothing.
      The LCD always remains black except at startup where we see the Vu + image for a few seconds.
      I can still access the ultimo with fileZilla or with telnet and I can turn it on with the remote control.
      What do you advise me to solve this problem?
      Maybe with telnet I could do something but I don't know because I don't know the telnet commands that I could place.
      If you have ideas it would be super nice to help me and I remain at your disposal for further information.
      Thanks in advance.
      Vu+ Ultimo 4K VTI 14.0.6
    • The VU+Ultimo 4K can be flashed by putting a FAT32 formated USB stick with the correct files in the proper directory.
    • I would suggest you do it over again.
      You have to download the right image once more, format your USB drive(remember FAT32) and flash the image once more
      regards
      Spoiler anzeigen

      -----------------------------
      PANASONIC TX-P65VTW60
      VU+ ULTIMO 4K
      VU+ DUO2
      Fluid HD _Standard Skin.

      Harmony Ultimate One FB
      Harmony Elite FB
      Logitech z906





      Alle VTI 15.X.X.

      Humax IRCI 5400Z-der geht noch immer wunderbar, _läuft und läuft
      -----------------------------
      Fantasie ist wichtiger als Wissen, denn Wissen ist begrenzt
    • Good morning all
      The problem is that I don't have the option to flash again.
      I know the way to do it.
      But I do not have the message on the lcd "press the power button" and therefore the flash can not start.
      And even if I press the power button nothing happens.
      The lcd always remains black and nothing is displayed.
      Vu+ Ultimo 4K VTI 14.0.6
    • There is no way you can tell us you can't flash the BOX
      USB stick must be formatted with FAT32, check the files on the USB too, insert USB stick, switch off the power from behind, and then ON
      I have done this on many an occasion and it has never failed
      Spoiler anzeigen

      -----------------------------
      PANASONIC TX-P65VTW60
      VU+ ULTIMO 4K
      VU+ DUO2
      Fluid HD _Standard Skin.

      Harmony Ultimate One FB
      Harmony Elite FB
      Logitech z906





      Alle VTI 15.X.X.

      Humax IRCI 5400Z-der geht noch immer wunderbar, _läuft und läuft
      -----------------------------
      Fantasie ist wichtiger als Wissen, denn Wissen ist begrenzt
    • Either with my ultimo or my ultimo 4k I flashed the receivers a lot of times.
      I know very well how to do this operation.
      But this time it doesn't work.
      I tried everything possible with the usb stick.
      The problem is not how to flash.
      If I want to flash the ultimo 4k it is that at the start it no longer works correctly.
      During normal startup, I no longer have a display on the lcd except at the very beginning when I have the VTI display.
      And on the TV simply the VTI image which flashes from time to time.
      I thought that in telnet we could modify or delete files so that the ultimo restarts properly.
      It doesn't matter if I lose everything I could reinstall everything afterwards.
      Vu+ Ultimo 4K VTI 14.0.6
    • in 99% of all problems, the zip file is unpacked incorrectly (not /vuplus/ultimo4k/files)
      in the remaining 1% it is a problem with the stick.
      Sometimes even Sticks which have been used before, do not work anymore.
      ACHTUNG!!!! Hier folgt eine Signatur:


      Die Benutzung der Suche ist NICHT verboten! D:

      "Hilfe!!!" ist kein sinnvoller Titel für einen neuen Thread, ebensowenig "VU+Zero" oder vergleichbares.

      Keine Hilfe ohne ausgefülltes Profil!
      Kein Netzwerksupport bei manueller IP-Adress-Vergabe :-)
      Kein Support bei portforwardings/ Portfreigaben

      Profil extra angepasst für die arme Emma, die sonst nichts im Leben hat :happy1:
    • I spent the afternoon trying 3 different USB keys and 3 different images.
      And I still have this same problem.
      I'm thinking more of a faulty driver at the ultimo level.
      This is why I thought that with telnet commands we could restart in safe mode or minimal configuration as we can do under windows
      Vu+ Ultimo 4K VTI 14.0.6
    • There is no driver which could be faulty at the moment you switch on your vu+
      The bootloader starts and checks for an usb stick which is correctly prepared. If found, the flashing starts, if not, the image from flash memory ist started
      ACHTUNG!!!! Hier folgt eine Signatur:


      Die Benutzung der Suche ist NICHT verboten! D:

      "Hilfe!!!" ist kein sinnvoller Titel für einen neuen Thread, ebensowenig "VU+Zero" oder vergleichbares.

      Keine Hilfe ohne ausgefülltes Profil!
      Kein Netzwerksupport bei manueller IP-Adress-Vergabe :-)
      Kein Support bei portforwardings/ Portfreigaben

      Profil extra angepasst für die arme Emma, die sonst nichts im Leben hat :happy1:
    • There is no minimal system you could telnet into. There is no way to do the flashing process from the command line.

      The only thing you could do is to connect the box via serial cable to a PC. There are some diagnostic messages send to the console during startup. These might help to do some diagnosis why your flashing process doesn't work.

      But this is for diagnosis only. There is no way to do the flashing over serial.

      There is only one way to flash the box, and that is the known procedure using the USB stick.
    • If you have warranty, please send it back for a replacement, before you have a headache
      regards
      Spoiler anzeigen

      -----------------------------
      PANASONIC TX-P65VTW60
      VU+ ULTIMO 4K
      VU+ DUO2
      Fluid HD _Standard Skin.

      Harmony Ultimate One FB
      Harmony Elite FB
      Logitech z906





      Alle VTI 15.X.X.

      Humax IRCI 5400Z-der geht noch immer wunderbar, _läuft und läuft
      -----------------------------
      Fantasie ist wichtiger als Wissen, denn Wissen ist begrenzt
    • That's it I found the problem.
      The USB port on the front panel is defective.
      However, the ultimo is brand new and I had already used it to flash a first image.
      I tried to flash an image from a usb port on the back side and there it worked.
      Phew, I'm relieved.
      We don't always think of a hardware failure.
      Thank you very much for your advice.
      Vu+ Ultimo 4K VTI 14.0.6
    • Weygand schrieb:

      The USB port on the front panel is defective.
      However, the ultimo is brand new and I had already used it to flash a first image.
      If it is still new and the USB port is "dead", I would send it back for replacement.
      You are going to live with this Box another 4-5 years.
      Spoiler anzeigen

      -----------------------------
      PANASONIC TX-P65VTW60
      VU+ ULTIMO 4K
      VU+ DUO2
      Fluid HD _Standard Skin.

      Harmony Ultimate One FB
      Harmony Elite FB
      Logitech z906





      Alle VTI 15.X.X.

      Humax IRCI 5400Z-der geht noch immer wunderbar, _läuft und läuft
      -----------------------------
      Fantasie ist wichtiger als Wissen, denn Wissen ist begrenzt