Duo 2 / VTI 14.0.6 / EMS
Hallo, ich habe seit einer Stunde dieses Problem:
Wenn ich die Archiv-Taste der FB betätige, erscheint der EMS-Archivbildschirm, die Aufnahmenliste bleibt aber leer, bis auf den Text "Lade Verzeichnis..."
Wenn ich versuche, per Menu-Taste und beispielsweise Anwählen der Option "Verzeichnis hoch" das Verzeichnis zu wechseln, dann passiert kurz nix und dann gibt es einen BS mit Absturzmeldung.
Box startet in 10 Sekunden neu und so weiter. Das Einzige, dass ich aus dem Angezeigten erkennen kann ist, dass die DVBAPP2 einen abgestürzt ist.
Nach dem Neustart hat sich aber nichts gebessert, der Absturz lässt sich reproduzieren.
Ich habe mal zur Probe das EMC im Setup-Menü eaktiviert und neugestartet; danach war ein Aufrufen der Aufnahmenliste möglich, aber die Aufnahmen sind seltsam sortiert und iich komme nicht gut damit zurecht. Einige Aufnahmen werden als Ordner angezteigt, andere eher so wie eine Datei.
Wenn ich EMC wieder aktiviere und neustarte, dann ist der Fehler wie zuvor.
Das Problem hängt irgendwie zwischen EMC und DVBAPP, aber was ist es?
Ganz perfekt und rund läuft die Duo2 nie, seit ich sie habe (2014), aber dieses spezifische Problem mit dem EMC hatte ich heute zum ersten Mal.
Das einzige Auffällige, dass mir vorher passiert ist, war ein Vollaufen der Festplatte.
Ich habe es zu spät gemerkt und per Netzwerk schnell ein paar Aufnahmen runtergezogen, aber ich bekam trotzdem die Fehlermeldung "Schreibfehler bei der Aufnahme. Festplatte voll?" (Die kenne ich sehr gut).
Und danach die Meldung: "Fehler beim Schreiben der Änderungen" (Die habe ich bisher kaum gesehen).
Kann die zweite Fehlermeldung darauf hinweisen, dass irgendwas im Zusammenhang mit der Verzeichnisansicht (für das EMC) kaputtgegangen ist?
Wenn ich mir das letzte Crashlog ansehe, verstehe ich leider auch nichts, bin nicht in der Materie (Mir fallen ansonsten nur Einträge zu Titeln von Aufnahmen oder Mediendateien auf, die teilweise vor Jahren mal aufgenommen oder abgespielt worden waren. Wo er die her hat oder warum die gepseichert werden, versteh ich auch nicht).
Kann jemand was damit anfangen?
Spoiler anzeigen
Alles anzeigen
Bitte helft mir, ich habe von selbst gar keine Ahnung, wo ich da ansetzen kann.
Habe mal das Debuggen beim EMC aktiviert.
Hier ist ein Log nach zwei Abstürzen:
Spoiler anzeigen
Alles anzeigen
Wie ich im Eingangspost schon schrieb, kann ich damit leider nichts anfangen.
Hallo, ich habe seit einer Stunde dieses Problem:
Wenn ich die Archiv-Taste der FB betätige, erscheint der EMS-Archivbildschirm, die Aufnahmenliste bleibt aber leer, bis auf den Text "Lade Verzeichnis..."
Wenn ich versuche, per Menu-Taste und beispielsweise Anwählen der Option "Verzeichnis hoch" das Verzeichnis zu wechseln, dann passiert kurz nix und dann gibt es einen BS mit Absturzmeldung.
Box startet in 10 Sekunden neu und so weiter. Das Einzige, dass ich aus dem Angezeigten erkennen kann ist, dass die DVBAPP2 einen abgestürzt ist.
Nach dem Neustart hat sich aber nichts gebessert, der Absturz lässt sich reproduzieren.
Ich habe mal zur Probe das EMC im Setup-Menü eaktiviert und neugestartet; danach war ein Aufrufen der Aufnahmenliste möglich, aber die Aufnahmen sind seltsam sortiert und iich komme nicht gut damit zurecht. Einige Aufnahmen werden als Ordner angezteigt, andere eher so wie eine Datei.
Wenn ich EMC wieder aktiviere und neustarte, dann ist der Fehler wie zuvor.
Das Problem hängt irgendwie zwischen EMC und DVBAPP, aber was ist es?
Ganz perfekt und rund läuft die Duo2 nie, seit ich sie habe (2014), aber dieses spezifische Problem mit dem EMC hatte ich heute zum ersten Mal.
Das einzige Auffällige, dass mir vorher passiert ist, war ein Vollaufen der Festplatte.
Ich habe es zu spät gemerkt und per Netzwerk schnell ein paar Aufnahmen runtergezogen, aber ich bekam trotzdem die Fehlermeldung "Schreibfehler bei der Aufnahme. Festplatte voll?" (Die kenne ich sehr gut).
Und danach die Meldung: "Fehler beim Schreiben der Änderungen" (Die habe ich bisher kaum gesehen).
Kann die zweite Fehlermeldung darauf hinweisen, dass irgendwas im Zusammenhang mit der Verzeichnisansicht (für das EMC) kaputtgegangen ist?
Wenn ich mir das letzte Crashlog ansehe, verstehe ich leider auch nichts, bin nicht in der Materie (Mir fallen ansonsten nur Einträge zu Titeln von Aufnahmen oder Mediendateien auf, die teilweise vor Jahren mal aufgenommen oder abgespielt worden waren. Wo er die her hat oder warum die gepseichert werden, versteh ich auch nicht).
Kann jemand was damit anfangen?
Quellcode
- <?xml version="1.0" encoding="utf-8"?>
- <stbcrashlog>
- <dvbapp2>
- <crashdate>Thu Feb 27 06:25:26 2020</crashdate>
- <compiledate>Feb 25 2020</compiledate>
- <skin>Dark_Beauty_HD/mySkin/skin.xml</skin>
- <sourcedate>2020-02-25</sourcedate>
- <branch>vti-master</branch>
- </dvbapp2>
- <image>
- <stbmodel>duo2</stbmodel>
- <kernelcmdline>libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
- <nimsockets>NIM Socket 0:</nimsockets>
- <vtiversion>14.0.6</vtiversion>
- <imageversion>
- <![CDATA[
- version=0902201601210705
- creator=VTi <info@vuplus-support.org>
- url=http://www.vuplus-support.org/
- ]]>
- </imageversion>
- </image>
- <stb-configuration>
- <configuration>
- <![CDATA[
- config.CTVG.C54=190
- config.CTVG.C40=2
- config.skin.primary_skin=Dark_Beauty_HD/mySkin/skin.xml
- config.ci.1.static_pin=9190
- config.pic.lastDir=/autofs/sdb1/
- config.EMC.extmenu_list=true
- config.EMC.movie_show_cutnr=true
- config.EMC.extmenu_plugin=true
- config.EMC.directories_info=D
- config.keyboard.keymap=dream-de.kmap
- config.plugins.vtipanel.configurationbackup.backupdirs=['/etc/CCcam.cfg', '/etc/default_gw', '/etc/enigma2/', '/etc/hostname', '/etc/network/interfaces', '/etc/resolv.conf', '/etc/wpa_supplicant.conf']
- config.plugins.transcodingsetup.resolution=576p
- config.plugins.transcodingsetup.framerate=50000
- config.plugins.autoresolution.enable=true
- config.plugins.pts.maxevents=20
- config.plugins.pts.showinfobar=true
- config.plugins.pts.maxlength=480
- config.plugins.epgrefresh.delay_standby=90
- config.plugins.epgrefresh.interval=2
- config.plugins.epgrefresh.adapter=record
- config.plugins.epgrefresh.lastscan=1581969340
- config.plugins.epgrefresh.enabled=true
- config.plugins.epgrefresh.interval_seconds=30
- config.plugins.epgrefresh.show_help=false
- config.plugins.epgrefresh.show_in_extensionsmenu=true
- config.plugins.autotimer.maxdaysinfuture=0
- config.plugins.autotimer.delay=3
- config.plugins.autotimer.autopoll=true
- config.plugins.autotimer.timeout=1
- config.plugins.autotimer.interval=3
- config.plugins.autotimer.show_help=false
- config.plugins.manualfancontrols.pwmvalue=40
- config.plugins.QuickButton.backupdirs=['/etc/']
- config.plugins.vps.infotext=2
- config.plugins.vps.initial_time=30
- config.plugins.vps.allow_wakeup=true
- config.plugins.epgsearch.history_length=10
- config.plugins.devicemanager.enable_hotplug=true
- config.plugins.filebrowservti.savedir_left=false
- config.plugins.filebrowservti.path_right_tmp=/autofs/sdb1/Bilder Lumix G70/
- config.plugins.filebrowservti.savedir_right=false
- config.plugins.AtileHD.refreshInterval=10
- config.plugins.AtileHD.woeid=638242
- config.misc.rcused=0
- config.misc.firstrun=false
- config.misc.initialchannelselection=false
- config.misc.startCounter=3706
- config.misc.languageselected=false
- config.misc.defaultchosen=false
- config.misc.videowizardenabled=false
- config.misc.FPwakeUpTime=1582827960
- config.servicelist.lastmode=radio
- config.lcd.bright=6
- config.radio.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.radio" ORDER BY bouquet;1:7:2:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.favourites.radio" ORDER BY bouquet;
- config.radio.lastservice=1:0:2:6F28:445:1:C00000:0:0:0:
- config.av.osd_alpha=197
- config.av.surround_3d=spdif
- config.av.videorate.1080p=multi
- config.av.videoport=DVI
- config.av.bypass_edid_checking=00000001
- config.av.videomode.DVI=1080p
- config.Nims.1.configMode=equal
- config.Nims.0.diseqcMode=single
- config.Nims.0.powerMeasurement=false
- config.Nims.0.configMode=simple
- config.Nims.3.configMode=equal
- config.Nims.2.configMode=equal
- config.seek.selfdefined_46=60
- config.seek.selfdefined_13=15
- config.seek.selfdefined_79=300
- config.osd.language=de_DE
- config.subtitles.subtitle_position=50
- config.subtitles.subtitle_edgestyle_level=5
- config.subtitles.subtitle_fontsize=34
- config.subtitles.subtitle_fontcolor=2
- config.subtitles.subtitle_edgestyle=3
- config.subtitles.colourise_dialogs=true
- config.mediaplayer.show_main_menu=true
- config.OpenWebif.responsive_rcu_full_view=true
- config.recording.filename_composition=long
- config.recording.margin_before=2
- config.recording.margin_after=4
- config.recording.autoadjust_margin_after=1
- config.tv.lastroot=1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "bouquets.tv" ORDER BY bouquet;1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.favourites.tv" ORDER BY bouquet;
- config.tv.lastservice=1:0:19:286F:425:1:C00000:0:0:0:
- config.usage.on_movie_stop=movielist
- config.usage.timer_check_free_space=false
- config.usage.menu_sort_weight={'vtimain': {'submenu': {'vti_timer': {'sort': 50}, 'vti_servicelist': {'sort': 60}, 'vti_tv_radio': {'sort': 30}, 'vfdskin_selector': {'sort': 120}, 'about_screen': {'sort': 130}, 'vti_system_setup': {'sort': 80}, 'vti_panel_news': {'sort': 20}, 'atilehd_setup': {'sort': 100}, 'vti_subtitles': {'sort': 90}, 'vti_panel': {'sort': 10}, 'vti_movies': {'sort': 40}, 'device_manager': {'sort': 110}, 'vti_user_interface': {'sort': 70}}}, 'mainmenu': {'submenu': {}}}
- config.usage.showdish=false
- config.usage.check_for_updates=24
- config.usage.debug_type=off
- config.usage.debug_config=file
- config.usage.ask_timer_file_del=false
- config.usage.ts_clean_ts_older_than=2.0
- config.usage.on_short_powerpress=show_menu
- config.usage.on_movie_eof=movielist
- config.usage.timer_ask_path=false
- config.usage.show_bsod=true
- config.usage.on_long_powerpress=shutdown
- config.usage.movielist_progress_seen=90
- config.usage.epg_default_view=multiepg
- config.usage.record_file_name_date_at_end=true
- config.usage.infobar_timeout=3
- config.usage.hdd_standby=3600
- config.usage.ts_show_old_ts=true
- config.usage.movielist_last_played_movie=4097:0:0:0:0:0:0:0:0:0:/autofs/sdb1/Musik/Alben/wav/Carpenters/Singles 1969-1981/Carpenters Singles 1969-1981 07 Rainy Days and Mondays.wav
- config.audio.volume=55
- config.movielist.last_timer_videodir=/hdd/movie/Radio/
- ]]>
- </configuration>
- </stb-configuration>
- <software>
- <dvbapp2software>
- <![CDATA[
- enigma2 - vti-14.0.6-20200225-r00r00
- enigma2-base-plugins - vti-14.0.6-20200225-r00r00
- enigma2-data-enigma2 - vti-14.0.6-20200225-r00r00
- enigma2-data-fonts - vti-14.0.6-20200225-r00r00
- enigma2-data-keymaps - vti-14.0.6-20200225-r00r00
- enigma2-data-meta - vti-14.0.6-20200225-r00r00
- enigma2-data-spinner - vti-14.0.6-20200225-r00r00
- enigma2-data-xml - vti-14.0.6-20200225-r00r00
- enigma2-defaultservices - 1.0-r8-vti13
- enigma2-locale-ar - vti-14.0.6-20191005-r0
- enigma2-locale-ca - vti-14.0.6-20191005-r0
- enigma2-locale-cs - vti-14.0.6-20191005-r0
- enigma2-locale-da - vti-14.0.6-20191005-r0
- enigma2-locale-de - vti-14.0.6-20191005-r0
- enigma2-locale-el - vti-14.0.6-20191005-r0
- enigma2-locale-en - vti-14.0.6-20191005-r0
- enigma2-locale-es - vti-14.0.6-20191005-r0
- enigma2-locale-et - vti-14.0.6-20191005-r0
- enigma2-locale-fi - vti-14.0.6-20191005-r0
- enigma2-locale-fr - vti-14.0.6-20191005-r0
- enigma2-locale-fy - vti-14.0.6-20191005-r0
- enigma2-locale-hr - vti-14.0.6-20191005-r0
- enigma2-locale-hu - vti-14.0.6-20191005-r0
- enigma2-locale-is - vti-14.0.6-20191005-r0
- enigma2-locale-it - vti-14.0.6-20191005-r0
- enigma2-locale-lt - vti-14.0.6-20191005-r0
- enigma2-locale-lv - vti-14.0.6-20191005-r0
- enigma2-locale-nl - vti-14.0.6-20191005-r0
- enigma2-locale-no - vti-14.0.6-20191005-r0
- enigma2-locale-pl - vti-14.0.6-20191005-r0
- enigma2-locale-pt - vti-14.0.6-20191005-r0
- enigma2-locale-ru - vti-14.0.6-20191005-r0
- enigma2-locale-sk - vti-14.0.6-20191005-r0
- enigma2-locale-sl - vti-14.0.6-20191005-r0
- enigma2-locale-sr - vti-14.0.6-20191005-r0
- enigma2-locale-sv - vti-14.0.6-20191005-r0
- enigma2-locale-tr - vti-14.0.6-20191005-r0
- enigma2-locale-uk - vti-14.0.6-20191005-r0
- enigma2-locales - vti-14.0.6-20191005-r0
- enigma2-plugin-cams-cccam.2.0.11 - 1.0-r3
- enigma2-plugin-cams-cccam.2.3.0 - 1.0-r0
- enigma2-plugin-cams-oscam-unstable - 1.20+rev11572-r0
- enigma2-plugin-config-cccam - 1.0-r0
- enigma2-plugin-config-oscambutler - 1.0-r0
- enigma2-plugin-extensions-addstreamurl - 1.0-e2openpluginsgit20120411-r0
- enigma2-plugin-extensions-atilehd - 3.6-r0
- enigma2-plugin-extensions-autotimer - vti-14.0.6-20180913-r0
- enigma2-plugin-extensions-cdinfo - vti-14.0.6-20180720-r0
- enigma2-plugin-extensions-cooltvguide - Coolman_V7.3.0
- enigma2-plugin-extensions-cutlisteditor - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-dlnabrowser - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-dlnaserver - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-dvdplayer - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-enhancedmoviecenter - 1.0git20160514-r0
- enigma2-plugin-extensions-epgrefresh - vti-14.0.6-20180118-r0
- enigma2-plugin-extensions-epgsearch - vti-14.0.6-20180706-r0
- enigma2-plugin-extensions-filebrowservti - 1.6-24022018-r6
- enigma2-plugin-extensions-graphmultiepg - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-hbbtv - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-imdb - vti-14.0.6-20180720-r0
- enigma2-plugin-extensions-lcd4linux - 5.0-r6.vtir0
- enigma2-plugin-extensions-mediainfo - 3.0.7
- enigma2-plugin-extensions-mediaplayer - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-mediascanner - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-moviecut - vti-14.0.6-20180720-r0
- enigma2-plugin-extensions-movieretitle - vti-14.0.6-20180118-r0
- enigma2-plugin-extensions-multiquickbutton-vu - 2.7.17-r5
- enigma2-plugin-extensions-netcaster - vti-11.0.0-20161124-r0
- enigma2-plugin-extensions-onlinetvrecorder - 0.4-r0
- enigma2-plugin-extensions-openwebif - 1.2.9-vti-20200225-r0
- enigma2-plugin-extensions-oscambutler - 1.8-r0
- enigma2-plugin-extensions-permanenttimeshift - vti-14.0.5-20180720-r0
- enigma2-plugin-extensions-piconmanager - 2.4-20180706-r1
- enigma2-plugin-extensions-pictureplayer - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-remotechannelstreamconverter - 1.0-e2openpluginsgit20151009-r0
- enigma2-plugin-extensions-satipclient - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-streamtv - vti-14.0.6-20200225-r00r00
- enigma2-plugin-extensions-tageditor - vti-14.0.6-20180118-r0
- enigma2-plugin-extensions-webradiofs - 18.03
- enigma2-plugin-picons-vti.default - 1.2-20161123-r0
- enigma2-plugin-skin-750s - vti-14.0.6-20171118-r0
- enigma2-plugin-skin-atile - 6.0-r0
- enigma2-plugin-skin-dark-beauty-hd - 4.5
- enigma2-plugin-skin-mutespectator - 4.7-r0
- enigma2-plugin-skin-stylefhd - 2019-03-08-r0
- enigma2-plugin-skin-vuhd1080p - 1.2.20190305-r0
- enigma2-plugin-systemplugins-3gmodemmanager - vti-14.0.5-20191005-r00r00
- enigma2-plugin-systemplugins-animationsetup - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-autoframerate - 1.0-r0
- enigma2-plugin-systemplugins-autoresolution - vti-14.0.6-20181113-r0
- enigma2-plugin-systemplugins-autoshutdown - 1.4-r0
- enigma2-plugin-systemplugins-blindscan - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-cablescan - 1.0-r2
- enigma2-plugin-systemplugins-commoninterfaceassignment - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-devicemanager2 - 2.2-r0
- enigma2-plugin-systemplugins-fastscan - 1.3-r0
- enigma2-plugin-systemplugins-firmwareupgrade - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-fpgaupgrade - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-hdmicec - 1.8-r0
- enigma2-plugin-systemplugins-hotplug - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-manualfancontrol - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-mphelp - vti-14.0.6-20180118-r0
- enigma2-plugin-systemplugins-networkbrowser - vti-14.0.6-20180720-r0
- enigma2-plugin-systemplugins-networkwizard - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-remotecontrolcode - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-skinselector - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-toolkit - vti-14.0.6-20180118-r0
- enigma2-plugin-systemplugins-transcodingsetup - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-ui3dsetup - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-uipositionsetup - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-vfdskinselector - 3.10-r0
- enigma2-plugin-systemplugins-videoenhancement - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-videomode - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-videotune - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-vps - vti-14.0.6-20180720-r0
- enigma2-plugin-systemplugins-wirelessaccesspoint - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-wirelesslan - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-wolsetup - vti-14.0.6-20200225-r00r00
- enigma2-plugin-systemplugins-zappingmodeselection - vti-14.0.6-20200225-r00r00
- enigma2-plugins-meta - vti-14.0.6-20180720-r0
- enigma2-python - vti-14.0.6-20200225-r00r00
- enigma2-skins-meta - vti-14.0.6-20171118-r0
- enigma2-streamproxy - 1.0+git15+37a3f19-r5.vti001
- enigma2-transtreamproxy - 2.0-r11-vti03+git38+7675a1e-r11-vti03
- enigma2-vti-modules - vti-14.0.6-20200225-r00r00
- packagegroup-vuplus-enigma2 - 1.0-r27-vti26
- ]]>
- </dvbapp2software>
- <gstreamersoftware>
- <![CDATA[
- gstreamer1.0 - 1.14.2-r0-vti08.01
- gstreamer1.0-libav - 1.14.2-r0-vti08.01
- gstreamer1.0-plugin-dvbmediasink - 1.0+vti004-r0-vti08.r12-bsp2
- gstreamer1.0-plugin-subsink - 1.0+git7+2c4288b-r0-vti08.01-vti08.01
- gstreamer1.0-plugins-bad - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-faad - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-hls - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-mms - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-mpegpsdemux - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-mpegtsdemux - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-neonhttpsrc - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-rtmp - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-bad-videoparsersbad - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-alsa - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-app - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-audioconvert - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-audioresample - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-ogg - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-playback - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-subparse - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-typefindfunctions - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-base-vorbis - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-apetag - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-audioparsers - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-autodetect - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-avi - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-flac - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-flv - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-icydemux - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-id3demux - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-isomp4 - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-matroska - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-mpg123 - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-rtp - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-rtpmanager - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-rtsp - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-soup - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-udp - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-good-wavparse - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-ugly - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-ugly-amrnb - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-ugly-amrwbdec - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-ugly-asf - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-ugly-cdio - 1.14.2-r0-vti08.01
- gstreamer1.0-plugins-ugly-dvdsub - 1.14.2-r0-vti08.01
- libgstadaptivedemux-1.0-0 - 1.14.2-r0-vti08.01
- libgstapp-1.0-0 - 1.14.2-r0-vti08.01
- libgstaudio-1.0-0 - 1.14.2-r0-vti08.01
- libgstcodecparsers-1.0-0 - 1.14.2-r0-vti08.01
- libgstmpegts-1.0-0 - 1.14.2-r0-vti08.01
- libgstpbutils-1.0-0 - 1.14.2-r0-vti08.01
- libgstriff-1.0-0 - 1.14.2-r0-vti08.01
- libgstrtp-1.0-0 - 1.14.2-r0-vti08.01
- libgstrtsp-1.0-0 - 1.14.2-r0-vti08.01
- libgstsdp-1.0-0 - 1.14.2-r0-vti08.01
- libgsttag-1.0-0 - 1.14.2-r0-vti08.01
- libgsturidownloader-1.0-0 - 1.14.2-r0-vti08.01
- libgstvideo-1.0-0 - 1.14.2-r0-vti08.01
- ]]>
- </gstreamersoftware>
- </software>
- <crashlogs>
- <dvbapp2crashlog>
- <![CDATA[
- fy existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with '1LIVE Kassettendeck' as title(ignore case)
- [eEPGCache] lookup events with 'Tagesthemen' as title(case sensitive)
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with 'Die Tagesschau vor 25 Jahren' as title(case sensitive)
- [eEPGCache] lookup events with 'Der Wochenspiegel vor 25 Jahren' as title(case sensitive)
- [eEPGCache] lookup events with 'Tagesschau vor 20 Jahren' as title(case sensitive)
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with 'Zeiglers wunderbare Welt des Fußballs' as title(ignore case)
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with 'The Walking Dead' as title(case sensitive)
- [eEPGCache] lookup events with '1LIVE Fiehe' in title(ignore case)
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with 'Twin Peaks' as title(case sensitive)
- [eEPGCache] lookup events with 'Klassiker der Weltliteratur' as title(ignore case)
- [eEPGCache] lookup events with 'ZEN-Meditation' in short event description(case sensitive)
- [eEPGCache] lookup events with 'Mythen - Michael Köhlmeier erzählt Sagen des klassischen Altertums' as title(ignore case)
- [eEPGCache] lookup events with 'Köhlmeiers Märchen' as title(case sensitive)
- [eEPGCache] lookup events with 'The Walking Dead' as title(case sensitive)
- [eEPGCache] lookup events with '1LIVE Talk' as title(ignore case)
- [eEPGCache] lookup events with 'alpha-centauri' as title(ignore case)
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with 'Die 4 Elemente' in title(ignore case)
- [eEPGCache] lookup events with 'Bob Ross - The Joy of Painting' as title(ignore case)
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Skipping an event because it starts in less than 60 seconds
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with '1LIVE Soundstories' as title(case sensitive)
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- [eEPGCache] lookup events with '1LIVE Krimi' as title(case sensitive)
- [AutoTimer] Won't modify existing timer because either no modification allowed or repeated timer
- abs position 0 0 -> 0 0
- m_fb_size width : 1280, height : 720
- abs position 784 72 -> 478 248
- m_fb_size width : 1280, height : 720
- EMC: resetInfo
- EMC: [EMC] LOAD PATH:
- /media/hdd/movie
- EMC addPathToCache /media/hdd/movie
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- [EMC] service valid= 1
- Traceback (most recent call last):
- File "/usr/lib/enigma2/python/mytest.py", line 240, in processDelay
- self.popCurrent()
- File "/usr/lib/enigma2/python/mytest.py", line 331, in popCurrent
- self.execBegin(first=False, do_show=do_show)
- File "/usr/lib/enigma2/python/mytest.py", line 263, in execBegin
- c.show()
- File "/usr/lib/enigma2/python/Plugins/SystemPlugins/AnimationSetup/plugin.py", line 140, in Screen_show
- orig_Screen__show(self)
- File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 2775, in L4L_replacement_Screen_show
- Screen.L4L_show_old(self)
- File "/media/build/vti-dorie/build/tmp/work/mips32el-oe-linux/enigma2-python/enigma2-python-vti-14.0.6-20200225-r00r00/git/lib/python/Screens/Screen.py", line 152, in show
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1719, in onDialogShow
- self.initList()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1884, in initList
- self.reloadList()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1905, in reloadList
- self.__reloadList(path)
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1921, in __reloadList
- if self["list"].reload(path):
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieCenter.py", line 2668, in reload
- list = self.reloadInternal(currentPath, simulate, recursive)
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieCenter.py", line 1241, in reloadInternal
- length = meta.getMetaLength()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MetaSupport.py", line 123, in getMetaLength
- return self.__ptsToSeconds( self.__mk_int( self.meta[self.LENGTH] ) )
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MetaSupport.py", line 84, in __mk_int
- return int(s) if s else 0
- ValueError: invalid literal for int() with base 10: '70240860\xe2\x80\xac\xe2\x80\xac'
- (PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x5af967d8>>,()) failed)
- ]]>
- </dvbapp2crashlog>
- </crashlogs>
- <systemmessages>
- ********************KERNEL LOG / SYSTEM MESSAGES********************
- <6>ehci-brcm ehci-brcm.1: Broadcom STB EHCI
- <6>ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
- <6>ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
- <6>ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
- <6>hub 2-0:1.0: USB hub found
- <6>hub 2-0:1.0: 1 port detected
- <6>ehci-brcm ehci-brcm.2: Broadcom STB EHCI
- <6>ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
- <6>ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
- <6>ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
- <6>hub 3-0:1.0: USB hub found
- <6>hub 3-0:1.0: 1 port detected
- <6>ehci-brcm ehci-brcm.3: Broadcom STB EHCI
- <6>ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
- <6>ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
- <6>ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
- <6>hub 4-0:1.0: USB hub found
- <6>hub 4-0:1.0: 1 port detected
- <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- <6>ohci-brcm ohci-brcm.0: Broadcom STB OHCI
- <6>ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
- <6>ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
- <6>hub 5-0:1.0: USB hub found
- <6>hub 5-0:1.0: 1 port detected
- <6>ohci-brcm ohci-brcm.1: Broadcom STB OHCI
- <6>ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
- <6>ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
- <6>ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- <6>ata2.00: ATA-9: WDC WD30EURX-63T0FY0, 80.00A80, max UDMA/133
- <6>ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- <6>ata2.00: configured for UDMA/133
- <6>hub 6-0:1.0: USB hub found
- <6>hub 6-0:1.0: 1 port detected
- <6>ohci-brcm ohci-brcm.2: Broadcom STB OHCI
- <6>ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
- <6>ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
- <5>scsi 1:0:0:0: Direct-Access ATA WDC WD30EURX-63T 80.0 PQ: 0 ANSI: 5
- <5>sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
- <5>sd 1:0:0:0: [sda] 4096-byte physical blocks
- <5>sd 1:0:0:0: Attached scsi generic sg0 type 0
- <5>sd 1:0:0:0: [sda] Write Protect is off
- <7>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
- <5>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- <6>hub 7-0:1.0: USB hub found
- <6>hub 7-0:1.0: 1 port detected
- <6>ohci-brcm ohci-brcm.3: Broadcom STB OHCI
- <6>ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
- <6>ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
- <6> sda: sda1
- <5>sd 1:0:0:0: [sda] Attached SCSI disk
- <6>usb 4-1: new high-speed USB device number 2 using ehci-brcm
- <6>hub 8-0:1.0: USB hub found
- <6>hub 8-0:1.0: 1 port detected
- <6>usbcore: registered new interface driver usb-storage
- <6>mousedev: PS/2 mouse device common for all mice
- <6>i2c /dev entries driver
- <6>IR NEC protocol handler initialized
- <6>IR RC5(x) protocol handler initialized
- <6>IR RC6 protocol handler initialized
- <6>IR JVC protocol handler initialized
- <6>IR Sony protocol handler initialized
- <6>IR RC5 (streamzap) protocol handler initialized
- <6>IR SANYO protocol handler initialized
- <6>IR MCE Keyboard/mouse protocol handler initialized
- <6>gspca_main: v2.14.0 registered
- <6>sdhci: Secure Digital Host Controller Interface driver
- <6>sdhci: Copyright(c) Pierre Ossman
- <6>sdhci-pltfm: SDHCI platform and OF driver helper
- <6>hidraw: raw HID events driver (C) Jiri Kosina
- <6>usbcore: registered new interface driver usbhid
- <6>usbhid: USB HID core driver
- <6>TCP: cubic registered
- <6>NET: Registered protocol family 17
- <5>Key type dns_resolver registered
- <6>PM: CP0 COUNT/COMPARE frequency does not depend on divisor
- <6>EBI CS0: setting up NAND flash (primary)
- <6>NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
- <6>NAND device: 1024MiB, SLC, page size: 2048, OOB size: 64
- <6>brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
- <6>Bad block table found at page 524224, version 0x01
- <6>Bad block table found at page 524160, version 0x01
- <6>nand_read_bbt: bad block at 0x000016880000
- <6>nand_read_bbt: bad block at 0x000023fc0000
- <6>nand_read_bbt: bad block at 0x0000252a0000
- <5>Creating 4 MTD partitions on "brcmnand.0":
- <5>0x000002700000-0x000040000000 : "rootfs"
- <5>0x000002700000-0x000040000000 : "rootfs(redundant)"
- <5>0x000000200000-0x000000900000 : "kernel"
- <5>0x000000900000-0x000000b00000 : "mac"
- <5>UBI: attaching mtd0 to ubi0
- <5>random: nonblocking pool is initialized
- <5>UBI: scanning is finished
- <5>UBI: attached mtd0 (name "rootfs", size 985 MiB) to ubi0
- <5>UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- <5>UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- <5>UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
- <5>UBI: good PEBs: 7873, bad PEBs: 7, corrupted PEBs: 0
- <5>UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
- <5>UBI: max/mean erase counter: 54/28, WL threshold: 4096, image sequence number: 534114782
- <5>UBI: available PEBs: 0, total reserved PEBs: 7873, PEBs reserved for bad PEB handling: 153
- <5>UBI: background thread "ubi_bgt0d" started, PID 52
- <6>ALSA device list:
- <6> No soundcards found.
- <5>UBIFS: parse sync
- <5>UBIFS: background thread "ubifs_bgt0_0" started, PID 55
- <5>UBIFS: mounted UBI device 0, volume 0, name "rootfs"
- <5>UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- <5>UBIFS: FS size: 978350080 bytes (933 MiB, 7705 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
- <5>UBIFS: reserved for root: 0 bytes (0 KiB)
- <5>UBIFS: media format: w4/r0 (latest is w4/r0), UUID B63AE0E7-59C1-4074-B24F-1EC818DB71AA, small LPT model
- <6>VFS: Mounted root (ubifs filesystem) on device 0:12.
- <6>devtmpfs: mounted
- <6>Freeing unused kernel memory: 244K (80783000 - 807c0000)
- <30>udevd[73]: starting version 182
- <3>UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
- <4>rtusb init rt2870 --->
- <4>
- <4>
- <4>=== pAd = e0338000, size = 511128 ===
- <4>
- <4><-- RTMPAllocTxRxRingMemory, Status=0
- <4><-- RTMPAllocAdapterBlock, Status=0
- <6>usbcore: registered new interface driver rt2870
- <4>procmk_init
- <4>bcm_event: module license 'Proprietary' taints kernel.
- <4>Disabling lock debugging due to kernel taint
- <6>brcmnand brcmnand.0: corrected error at 0x28b9b400
- <6>DVB: registering new adapter (_vuplus_duo2_)
- <4>bcm7424: hotplug_callback():
- <4>Hotplug - status.connected 1:0:0
- <4>bcm7424: hotplug_callback():
- <4>Hotplug - connecting HDMI to display 0xe
- <4>[GPIO]Default
- <4>[GP]:brcm_pwm_init
- <4>
- <4>bcm7424: hotplug_callback():
- <4>Hotplug - status.connected 1:1:2
- <6>brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
- <4>[MPVR]: >> misc_pvr_init
- <4>[VID]: 6bcm7335_video_init
- <4>BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
- <4>BKNI_Malloc(linuxkernel) top users:
- <4> blocks, bytes, filename:line
- <4> 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
- <4> 398, 28656, magnum/commonutils/mrc/src/bmrc_monitor.c:666
- <4>[AUD]: 6bcm7335_audio_init
- <6>BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
- <6>BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
- <6>BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
- <6>BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
- <4>bcm7424: bcm7335_frontend_init(): vtuner1 : 5
- <4> KSEG1 : 0x80000000
- <4>lcr 0x3
- <4>irq : 63 ret : 0
- <6>input: dreambox advanced remote control (native) as /devices/virtual/input/input0
- <4>Resistor Div: 0x0
- <4>Duo2 LCD initialized 0
- <6>[LCD]: registered
- <6>[CI]: registered ci0 249
- <6>[CI]: registered ci1 248
- <6>[CI]: CI interface initialised
- <6>
- <6>[DFP]: registered dbox fp
- <6>[DFP]: Scart 9597 is found 0
- <6>
- <6>[SC]: registered sci0
- <6>[SC]: registered sci1
- <4>system_time_set wakeup mode get
- <4>system_time_set wakeup mode get 0xc3
- <4>FP Update Driver Loaded
- <4>VFDController Update Driver Loaded
- <4>BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
- <4>BKNI_Malloc(linuxkernel) top users:
- <4> blocks, bytes, filename:line
- <4> 1620, 358920, BSEAV/lib/utils/balloc.c:31
- <4> 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
- <6>EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- <4>[VID]: VIDEO_SET_STREAMTYPE 0
- <4>[VID]: VIDEO_SELECT_SOURCE 1 0
- <4>[VID]: VIDEO_PLAY 1 2 0
- <4>[VID]: VIDEO_CONTINUE 1 1
- <4>[VID]: VIDEO_CLEAR_BUFFER 1 1 0
- <4>[VID]: VIDEO_STOP 0 1
- <4>[VID]: VIDEO_SELECT_SOURCE 0 0
- <7>__clk_enable: network [1]
- <7>bcm7425_pm_network_enable 00
- <7>__clk_enable: enet [1]
- <7>bcm40nm_pm_genet_enable 00
- <6>bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
- <6>NET: Registered protocol family 10
- <4>[VID]: VIDEO_SET_STREAMTYPE 0
- <4>[VID]: VIDEO_SELECT_SOURCE 1 0
- <4>[VID]: VIDEO_PLAY 1 2 0
- <4>[VID]: VIDEO_CONTINUE 1 1
- <4>[VID]: VIDEO_CLEAR_BUFFER 1 1 0
- <4>[VID]: VIDEO_STOP 0 1
- <4>[VID]: VIDEO_SELECT_SOURCE 0 0
- <4>[VID]: VIDEO_SET_STREAMTYPE 0
- <4>[VID]: VIDEO_SELECT_SOURCE 1 0
- <4>[VID]: VIDEO_PLAY 1 2 0
- <4>[VID]: VIDEO_CONTINUE 1 1
- <4>[VID]: VIDEO_CLEAR_BUFFER 1 1 0
- <4>[VID]: VIDEO_STOP 0 1
- <4>[VID]: VIDEO_SELECT_SOURCE 0 0
- <3>UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
- <6>brcmnand brcmnand.0: corrected error at 0x555c000
- <6>brcmnand brcmnand.0: corrected error at 0x555c000
- <4>[AUD]: AUDIO_SET_MUTE 0
- <4>[AUD]: AUDIO_SET_MIXER -835461648
- <4>[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
- <4>[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
- <4>[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
- <4>[AUD]: AUDIO_SET_MIXER -835461648
- <4>[AUD]: AUDIO_SET_MIXER : amixl 29, amixr 29
- <4>[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
- <4>[AUD]: AUDIO_SET_MIXER : next left volume -2141, right volume -2141
- <4>FE tune
- <3>dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
- <4>[AUD]: AUDIO_SELECT_SOURCE 0
- <4>[AUD]: AUDIO_SET_BYPASS_MODE 1
- <4>[AUD]: downmix 0 state : 0
- <4>[AUD]: AUDIO_PAUSE 7988016
- <4>[AUD]: AUDIO_PLAY 7988016 decoder start : 0
- <4>[AUD]: AUDIO_CONTINUE 7988016 1 aph=0xcc246580
- <4>[AUD]: Mute : 0
- <4>[VID]: VIDEO_SELECT_SOURCE 1 0
- <4>[VID]: VIDEO_SET_STREAMTYPE 0
- <4>[VID]: VIDEO_PLAY 0 2 0
- <4>[VID]: VIDEO_CONTINUE 0 1
- <4>[VID]: VIDEO_CLEAR_BUFFER 0 1 0
- <4>[AUD]: AUDIO_CHANNEL_SELECT 0
- <4>[VID]: VIDEO_STOP 0 1
- <4>[VID]: VIDEO_SELECT_SOURCE 0 0
- <3>dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
- <4>[AUD]: AUDIO_CONTINUE 7988016 1 aph=0xcc246580
- <4>[AUD]: Mute : 0
- <4>[VID]: VIDEO_SELECT_SOURCE 1 0
- <4>[VID]: VIDEO_SET_STREAMTYPE 0
- <4>[VID]: VIDEO_PLAY 0 2 0
- <4>[VID]: VIDEO_CONTINUE 0 1
- <4>[VID]: VIDEO_CLEAR_BUFFER 0 1 0
- <4>[VID]: VIDEO_STOP 0 1
- <4>[VID]: VIDEO_SELECT_SOURCE 0 0
- </systemmessages>
- </stbcrashlog>
Bitte helft mir, ich habe von selbst gar keine Ahnung, wo ich da ansetzen kann.
Habe mal das Debuggen beim EMC aktiviert.
Hier ist ein Log nach zwei Abstürzen:
Quellcode
- 20200227 07:39 [EMC] LOAD PATH:
- /media/hdd/movie
- 20200227 07:40 +++ EMC git20160416 startup
- 20200227 07:40 Setting EPG language: de_DE
- 20200227 07:40 Next trashcan cleanup in 1040 minutes
- 20200227 07:40 [EMCMS] trashcan cleanup: nothing to delete...
- 20200227 07:40 [EMC] LOAD PATH:
- /media/hdd/movie
- 20200227 07:40 [showMoviesNew] exception:
- invalid literal for int() with base 10: '70240860\xe2\x80\xac\xe2\x80\xac'
- Traceback (most recent call last):
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/plugin.py", line 467, in showMoviesNew
- gSession.openWithCallback(showMoviesCallback, EMCSelection)
- File "/usr/lib/enigma2/python/mytest.py", line 343, in openWithCallback
- dlg = self.open(screen, *arguments, **kwargs)
- File "/usr/lib/enigma2/python/mytest.py", line 356, in open
- self.execBegin()
- File "/usr/lib/enigma2/python/mytest.py", line 263, in execBegin
- c.show()
- File "/usr/lib/enigma2/python/Plugins/SystemPlugins/AnimationSetup/plugin.py", line 140, in Screen_show
- orig_Screen__show(self)
- File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 2775, in L4L_replacement_Screen_show
- Screen.L4L_show_old(self)
- File "/media/build/vti-dorie/build/tmp/work/mips32el-oe-linux/enigma2-python/enigma2-python-vti-14.0.6-20200225-r00r00/git/lib/python/Screens/Screen.py", line 152, in show
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1719, in onDialogShow
- self.initList()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1884, in initList
- self.reloadList()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1905, in reloadList
- self.__reloadList(path)
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1921, in __reloadList
- if self["list"].reload(path):
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieCenter.py", line 2668, in reload
- list = self.reloadInternal(currentPath, simulate, recursive)
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieCenter.py", line 1241, in reloadInternal
- length = meta.getMetaLength()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MetaSupport.py", line 123, in getMetaLength
- return self.__ptsToSeconds( self.__mk_int( self.meta[self.LENGTH] ) )
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MetaSupport.py", line 84, in __mk_int
- return int(s) if s else 0
- ValueError: invalid literal for int() with base 10: '70240860\xe2\x80\xac\xe2\x80\xac'
- 20200227 07:45 [EMC] LOAD PATH:
- /media/hdd/movie
- 20200227 07:45 [showMoviesNew] exception:
- invalid literal for int() with base 10: '70240860\xe2\x80\xac\xe2\x80\xac'
- Traceback (most recent call last):
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/plugin.py", line 467, in showMoviesNew
- gSession.openWithCallback(showMoviesCallback, EMCSelection)
- File "/usr/lib/enigma2/python/mytest.py", line 343, in openWithCallback
- dlg = self.open(screen, *arguments, **kwargs)
- File "/usr/lib/enigma2/python/mytest.py", line 356, in open
- self.execBegin()
- File "/usr/lib/enigma2/python/mytest.py", line 263, in execBegin
- c.show()
- File "/usr/lib/enigma2/python/Plugins/SystemPlugins/AnimationSetup/plugin.py", line 140, in Screen_show
- orig_Screen__show(self)
- File "/usr/lib/enigma2/python/Plugins/Extensions/LCD4linux/plugin.py", line 2775, in L4L_replacement_Screen_show
- Screen.L4L_show_old(self)
- File "/media/build/vti-dorie/build/tmp/work/mips32el-oe-linux/enigma2-python/enigma2-python-vti-14.0.6-20200225-r00r00/git/lib/python/Screens/Screen.py", line 152, in show
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1719, in onDialogShow
- self.initList()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1884, in initList
- self.reloadList()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1905, in reloadList
- self.__reloadList(path)
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieSelection.py", line 1921, in __reloadList
- if self["list"].reload(path):
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieCenter.py", line 2668, in reload
- list = self.reloadInternal(currentPath, simulate, recursive)
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MovieCenter.py", line 1241, in reloadInternal
- length = meta.getMetaLength()
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MetaSupport.py", line 123, in getMetaLength
- return self.__ptsToSeconds( self.__mk_int( self.meta[self.LENGTH] ) )
- File "/usr/lib/enigma2/python/Plugins/Extensions/EnhancedMovieCenter/MetaSupport.py", line 84, in __mk_int
- return int(s) if s else 0
- ValueError: invalid literal for int() with base 10: '70240860\xe2\x80\xac\xe2\x80\xac'
- 20200227 07:45 [EMC] LOAD PATH:
- /media/hdd/movie
- 20200227 07:46 +++ EMC git20160416 startup
- 20200227 07:46 Setting EPG language: de_DE
- 20200227 07:46 Next trashcan cleanup in 1034 minutes
- 20200227 07:46 [EMCMS] trashcan cleanup: nothing to delete...
Wie ich im Eingangspost schon schrieb, kann ich damit leider nichts anfangen.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Quamzin () aus folgendem Grund: Screenshot größer