Moin, ich hab beim Umschalten sporadisch das Problem, dass kein Bild und
kein Ton kommen. Wenn ich dann über Blaue Taste -> CAM Center die
OSCam neu starte dauert es 4-5 Sekunden und dann kommt Audio und Video.
Das passiert wie gesagt sporadisch und unregelmäßig bei verschiedenen
Sendern.
Zu meiner Box:
Version: 2019-12-23-vti-master (bed092820)
Image: Release 14.0.5 (BUILD: 2016-12-23)
OSCam 1.20 Rev. 11277
Debug Output beim Umschalten mit auftretendem "Blackscreen":
Alles anzeigen
kein Ton kommen. Wenn ich dann über Blaue Taste -> CAM Center die
OSCam neu starte dauert es 4-5 Sekunden und dann kommt Audio und Video.
Das passiert wie gesagt sporadisch und unregelmäßig bei verschiedenen
Sendern.
Zu meiner Box:
Version: 2019-12-23-vti-master (bed092820)
Image: Release 14.0.5 (BUILD: 2016-12-23)
OSCam 1.20 Rev. 11277
Debug Output beim Umschalten mit auftretendem "Blackscreen":
Quellcode
- 09:01:28.935 [e2-core] ++ 2/2 TID 4e
- 09:01:28.936 [e2-core] done!
- 09:01:28.937 [e2-core] doing version filtering
- 09:01:28.938 [e2-core] 0012: 4e ef 74 23 00 00
- 09:01:28.938 [e2-core] mask: ff ff ff 3f 00 00
- 09:01:28.938 [e2-core] mode: 00 00 00 3e 00 00
- 09:01:29.710 [e2-python] action -> InfobarChannelSelection switchChannelUp
- 09:01:30.923 [e2-python] action -> ChannelSelectBaseActions keyUp
- 09:01:32.234 [e2-python] action -> OkCancelActions ok
- 09:01:32.235 [e2-python] playing service..
- 09:01:32.239 [e2-core] [eDVBServiceFCCPlay::changeFCCMode][1:0:19:EF75:3F9:1:C00000:0:0:0:] disable FCC decoding.
- 09:01:32.239 [e2-core] [eDVBServiceFCCPlay::FCCDecoderStop][1:0:19:EF75:3F9:1:C00000:0:0:0:]
- 09:01:32.241 [e2-core] decoder state: play, vpid=-1, apid=-1
- 09:01:32.241 [e2-core] DEMUX_STOP - pcr - ok
- 09:01:32.265 [e2-core] AUDIO_STOP - ok
- 09:01:32.265 [e2-core] DEMUX_STOP - audio - ok
- 09:01:32.265 [e2-core] AUDIO_CONTINUE - ok
- 09:01:32.266 [e2-core] DEMUX_STOP - ttx - ok
- 09:01:32.266 [e2-core] [eTSMPEGDecoder] FCC_DECODER_STOP OK!
- 09:01:32.266 [e2-core] [eFCCServiceManager] use FCC service sref : 1:0:19:EF74:3F9:1:C00000:0:0:0:
- 09:01:32.267 [e2-core] [eDVBServiceFCCPlay::changeFCCMode][1:0:19:EF74:3F9:1:C00000:0:0:0:] enable FCC decoding.
- 09:01:32.267 [e2-core] [eDVBServiceFCCPlay::updateFCCDecoder][1:0:19:EF74:3F9:1:C00000:0:0:0:]
- 09:01:32.267 [e2-core] have 1 video stream(s) (00ff), and 1 audio stream(s) (0103), and the pcr pid is 00ff, and the text pid is 0020
- 09:01:32.267 [e2-core] disable teletext subtitles
- 09:01:32.268 [e2-core] no version filtering
- 09:01:32.268 [e2-core] 0105: 74 00 00 00 00 00
- 09:01:32.268 [e2-core] mask: ff 00 00 00 00 00
- 09:01:32.268 [e2-core] mode: 00 00 00 00 00 00
- 09:01:32.269 [e2-core] [autoAudioTrack] use audio track: 0
- 09:01:32.274 [e2-core] [eTSMPEGDecoder] FCC_DECODER_START OK!
- 09:01:32.274 [e2-core] decoder state: play, vpid=255, apid=259
- 09:01:32.274 [e2-core] DMX_SET_PES_FILTER(0xff) - pcr - ok
- 09:01:32.274 [e2-core] DEMUX_START - pcr - ok
- 09:01:32.275 [e2-core] DMX_SET_PES_FILTER(0x103) - audio - ok
- 09:01:32.275 [e2-core] DEMUX_START - audio - ok
- 09:01:32.275 [e2-core] AUDIO_SET_BYPASS(0) - ok
- 09:01:32.275 [e2-core] AUDIO_PAUSE - ok
- 09:01:32.277 [e2-core] AUDIO_PLAY - ok
- 09:01:32.277 [e2-core] Video Device: /dev/dvb/adapter0/video0
- 09:01:32.277 [e2-core] demux device: /dev/dvb/adapter0/demux0
- 09:01:32.277 [e2-core] DMX_SET_PES_FILTER(0x20) - ttx - ok
- 09:01:32.277 [e2-core] DEMUX_START - ttx - ok
- 09:01:32.279 [e2-core] VIDEO_SLOWMOTION(0) - ok
- 09:01:32.279 [e2-core] VIDEO_FAST_FORWARD(0) - ok
- 09:01:32.279 [e2-core] VIDEO_CONTINUE - ok
- 09:01:32.280 [e2-core] AUDIO_CONTINUE - ok
- 09:01:32.281 [e2-python] [#----] VTiCore not pauseable.
- 09:01:32.287 [e2-python] [#----] VTiCore not pauseable.
- 09:01:32.287 [e2-python] RemovePopup, id =ZapError
- 09:01:32.290 [e2-python] [AutoRes] service changed
- 09:01:32.293 [e2-python] Name : SAT.1
- 09:01:32.293 [e2-python] URL : http://hbbtv.redbutton.de/service/redbutton.php?brand=s1de
- 09:01:32.294 [e2-python] OrgID : 96
- 09:01:32.294 [e2-python] AppID : 1
- 09:01:32.294 [e2-python] Control Code : 1
- 09:01:32.294 [e2-python] Profile Code : 0
- 09:01:32.294 [e2-python]
- 09:01:32.294 [e2-python] [#----] VTiCore (1, 'SAT.1', 'http://hbbtv.redbutton.de/service/redbutton.php?brand=s1de', 96, 1, 0)
- 09:01:32.296 [e2-python] [#----] VTiCore [VTiEvent] SERVICE_START 1:0:19:EF74:3F9:1:C00000:0:0:0:, SAT.1 HD
- 09:01:32.451 [e2-core] [eFCCServiceManager] stop FCC service sref : 1:0:19:2E9B:411:1:C00000:0:0:0:
- 09:01:32.451 [e2-core] [eDVBCAService] free slot 0 demux 2 for service 1:0:19:2E9B:411:1:C00000:0:0:0:
- 09:01:32.451 [e2-core] [eDVBCAService] free service 1:0:19:2E9B:411:1:C00000:0:0:0:
- 09:01:32.453 [e2-core] decoder state: stop, vpid=-1, apid=-1
- 09:01:32.454 [e2-core] [eTSMPEGDecoder] FCC_STOP OK!
- 09:01:32.454 [e2-core] [eFCCDecoder] close /dev/fcc3
- 09:01:32.454 [e2-core] [eDVBCAService] remove channel 0x100c548
- 09:01:32.455 [e2-core] [eDVBLocalTimerHandler] remove channel 0x100c548
- 09:01:32.455 [e2-core] [eEPGCache] remove channel 0x100c548
- 09:01:32.487 [e2-core] allocate channel.. 03f3:0001
- 09:01:32.488 [e2-core] available channel.. 03f9:0001
- 09:01:32.488 [e2-core] available channel.. 0421:0001
- 09:01:32.488 [e2-core] Slot 0, score 15020... but BUSY!!!!!!!!!!!
- 09:01:32.488 [e2-core] Slot 1, score 15015
- 09:01:32.488 [e2-core] Slot 2, score 15020... but BUSY!!!!!!!!!!!
- 09:01:32.488 [e2-core] [eDVBResourceManager::allocateFrontend] m_fbc_mng->isCompatibleWith slotid : 0x5bba80 (3), fbc_fe : 0x5bb550 (0), score : 15020
- 09:01:32.488 [e2-core] Slot 3, score 15020
- 09:01:32.488 [e2-core] Slot 4, score 0
- 09:01:32.488 [e2-core] Slot 5, score 0
- 09:01:32.488 [e2-core] Slot 6, score 0
- 09:01:32.488 [e2-core] Slot 7, score 0
- 09:01:32.488 [e2-core] [*] setProcData /proc/stb/frontend/3/fbc_connect -> 0
- 09:01:32.490 [e2-core] [*] setProcData /proc/stb/frontend/3/fbc_link -> 1
- 09:01:32.492 [e2-core] [eDVBCAService] new channel 0x100c548!
- 09:01:32.492 [e2-core] (3)tune
- 09:01:32.492 [e2-core] RotorCmd ffffffff, lastRotorCmd ffffffff
- 09:01:32.493 [e2-core] prepare_sat Freq 11361750 Pol 0 SR 22000000 INV 2 FEC 2 orbpos 192 system 1 modulation 2 pilot 2, rolloff 0, is_id -1, pls_mode 3, pls_code 0
- 09:01:32.493 [e2-core] tuning to 1611 mhz
- 09:01:32.493 [e2-core] OURSTATE: tuning
- 09:01:32.493 [e2-core] allocate Channel: res 0
- 09:01:32.493 [e2-core] allocate demux
- 09:01:32.493 [e2-core] resolve: resolve ${sysconfdir}/scan_tp_valid_check.py
- 09:01:32.493 [e2-core] resolve: -> /etc/scan_tp_valid_check.py
- 09:01:32.494 [e2-core] [SEC] set static current limiting
- 09:01:32.494 [e2-core] [SEC] invalidate current switch params
- 09:01:32.494 [e2-core] set sequence pos 3
- 09:01:32.494 [e2-core] set sequence pos 3
- 09:01:32.494 [e2-core] [SEC] update current switch params
- 09:01:32.494 [e2-core] [SEC] startTuneTimeout 5000
- 09:01:32.494 [e2-core] [SEC] setFrontend 1
- 09:01:32.494 [e2-core] setting frontend 3
- 09:01:32.495 [e2-core] [SEC] sleep 500ms
- 09:01:32.505 [e2-core] (3)fe event: status 0, inversion off, m_tuning 1
- 09:01:32.561 [e2-core] (3)fe event: status 7, inversion off, m_tuning 2
- 09:01:32.689 [e2-core] (3)fe event: status 1f, inversion off, m_tuning 3
- 09:01:32.689 [e2-core] OURSTATE: ok
- 09:01:32.689 [e2-core] [eDVBCAService] channel 0x100c548 running
- 09:01:32.689 [e2-core] [eDVBLocalTimerHandler] channel 0x100c548 running
- 09:01:32.689 [e2-core] no version filtering
- 09:01:32.689 [e2-core] 0014: 70 00 00 00 00 00
- 09:01:32.690 [e2-core] mask: fc 00 00 00 00 00
- 09:01:32.690 [e2-core] mode: 00 00 00 00 00 00
- 09:01:32.690 [e2-core] [eEPGCache] channel 0x100c548 running
- 09:01:32.691 [e2-core] [eEPGCache] next update in 2 sec
- 09:01:32.691 [e2-core] stop release channel timer
- 09:01:32.691 [e2-core] no version filtering
- 09:01:32.691 [e2-core] 0012: 4e 2b 66 00 00 00
- 09:01:32.692 [e2-core] mask: ff ff ff 00 00 00
- 09:01:32.692 [e2-core] mode: 00 00 00 00 00 00
- 09:01:32.693 [e2-core] ok ... now we start!!
- 09:01:32.693 [e2-core] no version filtering
- 09:01:32.693 [e2-core] 0000: 00 00 00 00 00 00
- 09:01:32.693 [e2-core] mask: ff 00 00 00 00 00
- 09:01:32.694 [e2-core] mode: 00 00 00 00 00 00
- 09:01:32.694 [e2-core] eventNewProgramInfo 0 0 0
- 09:01:32.694 [e2-core] [eDVBServiceFCCPlay::updateFCCDecoder][1:0:19:2B66:3F3:1:C00000:0:0:0:]
- 09:01:32.694 [e2-core] have 1 video stream(s) (17de), and 1 audio stream(s) (17e8), and the pcr pid is 17de, and the text pid is 17f2 (Cached)
- 09:01:32.694 [e2-core] allocate demux
- 09:01:32.694 [e2-core] [eFCCDecoder] alloc /dev/fcc3
- 09:01:32.695 [e2-core] [eTSMPEGDecoder] FCC_START OK!
- 09:01:32.744 [e2-core] + 1/1 TID 00
- 09:01:32.745 [e2-core] done!
- 09:01:32.745 [e2-core] PATready
- 09:01:32.745 [e2-core] use pmtpid 17d4 for service_id 2b66
- 09:01:32.746 [e2-core] no version filtering
- 09:01:32.746 [e2-core] 17d4: 02 2b 66 00 00 00
- 09:01:32.746 [e2-core] mask: ff ff ff 00 00 00
- 09:01:32.746 [e2-core] mode: 00 00 00 00 00 00
- 09:01:32.746 [e2-core] doing version filtering
- 09:01:32.746 [e2-core] 0000: 00 00 00 01 00 00
- 09:01:32.747 [e2-core] mask: ff 00 00 3f 00 00
- 09:01:32.747 [e2-core] mode: 00 00 00 3e 00 00
- 09:01:32.866 [e2-core] sdt update done!
- 09:01:32.866 [e2-core] + 1/1 TID 02
- 09:01:32.867 [e2-core] done!
- 09:01:32.867 [e2-core] eventNewProgramInfo 0 0 0
- 09:01:32.867 [e2-core] [eDVBServiceFCCPlay::updateFCCDecoder][1:0:19:2B66:3F3:1:C00000:0:0:0:]
- 09:01:32.868 [e2-core] dvb subtitle PID 17f3 with wrong subtitling type (24)... force 0x10!!
- 09:01:32.869 [e2-core] no version filtering
- 09:01:32.869 [e2-core] 181a: 74 00 00 00 00 00
- 09:01:32.869 [e2-core] mask: ff 00 00 00 00 00
- 09:01:32.869 [e2-core] mode: 00 00 00 00 00 00
- 09:01:32.871 [e2-core] [autoAudioTrack] use audio track: 0
- 09:01:32.871 [e2-core] have 1 video stream(s) (17de), and 4 audio stream(s) (17e8, 17e9, 17ea, 17eb), and the pcr pid is 17de, and the text pid is 17f2
- 09:01:32.872 [e2-core] [eDVBCAService] new service 1:0:19:2B66:3F3:1:C00000:0:0:0:
- 09:01:32.872 [e2-core] [eDVBCAService] add demux 2 to slot 0 service 1:0:19:2B66:3F3:1:C00000:0:0:0:
- 09:01:32.872 [e2-core] demux 2 mask 04 prevhash 00000000
- 09:01:32.873 [e2-core] [eDVBCAService] send 74 bytes
- 09:01:32.873 [e2-core] 9f 80 32 46 03 2b 66 01 00 13 01 81 08 00 c0 00 00 03 f3 00 01 82 02 04 02 84 02 17 d4 1b 17 de 00 00 03 17 e8 00 00 03 17 e9 00 00 06 17 ea 00 00 03 17 eb 00 00 06 17 f2 00 00 06 17 f3 00 00 06 17 f4 00 00 05 18 1a 00 00
- 09:01:32.873 [e2-core] doing version filtering
- 09:01:32.873 [e2-core] 17d4: 02 2b 66 01 00 00
- 09:01:32.873 [e2-core] mask: ff ff ff 3f 00 00
- 09:01:32.873 [e2-core] mode: 00 00 00 3e 00 00
- 09:01:32.925 [e2-core] + 1/1 TID 74
- 09:01:32.925 [e2-core] done!
- 09:01:32.926 [e2-core] AITready
- 09:01:32.926 [e2-core] Section Length : 240, Total Section Length : 243
- 09:01:32.926 [e2-core] found applicaions ids >> pid : 105, orgid : 96, appid : 1
- 09:01:32.926 [e2-core] Save Data Len : [243]
- 09:01:32.926 [e2-core] Found : control[1], name[SAT.1], url[http://hbbtv.redbutton.de/service/redbutton.php?brand=s1de]
- 09:01:32.927 [e2-python] Name : SAT.1
- 09:01:32.927 [e2-python] URL : http://hbbtv.redbutton.de/service/redbutton.php?brand=s1de
- 09:01:32.927 [e2-python] OrgID : 96
- 09:01:32.927 [e2-python] AppID : 1
- 09:01:32.928 [e2-python] Control Code : 1
- 09:01:32.928 [e2-python] Profile Code : 0
- 09:01:32.928 [e2-python]
- 09:01:32.928 [e2-python] [#----] VTiCore (1, 'SAT.1', 'http://hbbtv.redbutton.de/service/redbutton.php?brand=s1de', 96, 1, 0)
- 09:01:32.997 [e2-core] [SEC] set dynamic current limiting
- 09:01:33.011 [e2-core] +- 1/2 TID 4e
- 09:01:33.081 [e2-core] ++ 2/2 TID 4e
- 09:01:33.082 [e2-core] done!
- 09:01:33.084 [e2-core] doing version filtering
- 09:01:33.084 [e2-core] 0012: 4e 2b 66 1f 00 00
- 09:01:33.084 [e2-core] mask: ff ff ff 3f 00 00
- 09:01:33.084 [e2-core] mode: 00 00 00 3e 00 00
- 09:01:33.218 [e2-core] + 1/1 TID 74
- 09:01:33.218 [e2-core] done!
- 09:01:33.218 [e2-core] AITready
- 09:01:33.219 [e2-core] Section Length : 348, Total Section Length : 351
- 09:01:33.219 [e2-core] found applicaions ids >> pid : 181a, orgid : 17, appid : 1
- 09:01:33.219 [e2-core] Save Data Len : [351]
- 09:01:33.219 [e2-core] found applicaions ids >> pid : 181a, orgid : 17, appid : 2
- 09:01:33.219 [e2-core] found applicaions ids >> pid : 181a, orgid : 17, appid : 7
- 09:01:33.219 [e2-core] found applicaions ids >> pid : 181a, orgid : 17, appid : 6
- 09:01:33.219 [e2-core] Found : control[1], name[ZDF Start], url[http://hbbtv.zdf.de/zdfstart/index.php]
- 09:01:33.219 [e2-core] Found : control[2], name[ZDF mediathek], url[http://hbbtv.zdf.de/zdfm3/index.php]
- 09:01:33.219 [e2-core] Found : control[2], name[ZDF Nachrichten], url[http://hbbtv.zdf.de/zdfnews/index.php]
- 09:01:33.219 [e2-core] Found : control[2], name[ZDF Programm], url[http://hbbtv.zdf.de/zdfepg/index.php]
- 09:01:33.291 [e2-python] [AutoRes] determineContent
- 09:01:34.700 [e2-core] [eEPGCache] start caching events(1582358494)
- 09:01:39.845 [e2-core] [eDVBLocalTimerHandler] diff is 0
- 09:01:39.845 [e2-core] [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
- 09:01:39.845 [e2-core] [eDVBLocalTimerHandler] not changed
- 09:01:40.341 [e2-core] no ancillary data in audio stream... abort radiotext pes parser
- 09:01:41.705 [e2-core] [eEPGCache] abort non avail schedule other reading
- 09:01:41.706 [e2-core] [eEPGCache] abort non avail netmed schedule reading
- 09:01:41.707 [e2-core] [eEPGCache] abort non avail netmed schedule other reading
- 09:01:41.707 [e2-core] [eEPGCache] abort non avail FreeSat schedule_other reading
- 09:01:41.707 [e2-core] [eEPGCache] abort non avail viasat reading
- 09:01:52.267 [e2-core] [eEPGCache] nownext finished(1582358503)
- no ancillary data in audio stream... abort radiotext pes parser