Kann nicht auf Ordner movie zugreifen

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • @Moleman
      Poste mal die Smart Werte der Festplatte. Dann kann man abschätzen, ob Eile geboten ist.
      Per Telnet oder Putty anmelden und dann eingeben:

      opkg install smartmontools && smartctl --all /dev/sda

      EDIT

      rdamas schrieb:

      kritische Attribute sind die mit den Nummern 5, 10, 183, 184, 187, 188, 196, 197, 198, 201 und 230 (Wikipedia et. al.)
      Rechtschreibfehler sind beabsichtigt, sie fördern ein genaueres Lesen
      Debug Log aktivieren Putty Telnet Screenshots erstellen

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von hajeku123 ()

    • Spoiler anzeigen

      Package smartmontools (6.2-r0) installed in root is up to date. smartctl 6.2 2013-07-26 r3841 [mips-linux-3.13.5] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-08A23T1 Serial Number: WD-WXQ1A80Y9899 LU WWN Device Id: 5 0014ee 2afb10bcf Firmware Version: 02.01A02 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Jan 26 19:14:03 2020 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 100) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1111 3 Spin_Up_Time 0x0027 138 134 021 Pre-fail Always - 2058 4 Start_Stop_Count 0x0032 051 051 000 Old_age Always - 49144 5 Reallocated_Sector_Ct 0x0033 157 157 140 Pre-fail Always - 470 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 18015 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5750 192 Power-Off_Retract_Count 0x0032 194 194 000 Old_age Always - 4899 193 Load_Cycle_Count 0x0032 104 104 000 Old_age Always - 290947 194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 37 196 Reallocated_Event_Count 0x0032 199 008 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 240 Head_Flying_Hours 0x0032 087 087 000 Old_age Always - 9526 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.


      Es sind wohl alle Aufnahmen vorhanden. In lost&found sind Dateien. Aber nicht von Heute (laut Datum). # und 6 Ziffern ist der Dateiname. Ich werde wichtige Aufnahmen natürlich sichern.
    • Ich würde dir empfehlen die Festplatte so schnell wie möglich auszutauschen.

      Wenn jemand die Smart-Werte lesen möchte...
      Spoiler anzeigen
      Package smartmontools (6.2-r0) installed in root is up to date.


      smartctl 6.2 2013-07-26 r3841 [mips-linux-3.13.5] (local build)
      Copyright (C) 2002-13, Bruce Allen, Christian Franke, smartmontools.org ===
      START OF INFORMATION SECTION ===
      Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-08A23T1
      Serial Number: WD-WXQ1A80Y9899 LU WWN Device Id: 5 0014ee 2afb10bcf
      Firmware Version: 02.01A02
      User Capacity: 320,072,933,376 bytes [320 GB]
      Sector Size: 512 bytes logical/physical
      Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show]
      ATA Version is: ATA8-ACS (minor revision not indicated)
      SATA Version is: SATA 2.6, 3.0 Gb/s (current: 3.0 Gb/s)
      Local Time is: Sun Jan 26 19:14:03 2020 CET
      SMART support is: Available - device has SMART capability.
      SMART support is: Enabled


      === START OF READ SMART DATA SECTION ===
      SMART overall-health self-assessment test result: PASSED


      General SMART Values:
      Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled.
      Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.
      Total time to complete Offline data collection: ( 8400) seconds.
      Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support.
      Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported.
      Conveyance Self-test supported. Selective Self-test supported. capabilities: (0x0003) Saves
      SMART data before entering power-saving mode.
      Supports SMART auto save timer. Error logging capability: (0x01)
      Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes.
      Extended self-test routine recommended polling time: ( 100) minutes.
      Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported.
      SCT Feature Control supported. SCT Data Table supported.
      SMART Attributes Data Structure revision number: 16 Vendor Specific


      SMART Attributes with Thresholds:
      ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1111
      3 Spin_Up_Time 0x0027 138 134 021 Pre-fail Always - 2058
      4 Start_Stop_Count 0x0032 051 051 000 Old_age Always - 49144
      5 Reallocated_Sector_Ct 0x0033 157 157 140 Pre-fail Always - 470
      7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
      9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 18015
      10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
      11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
      12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5750
      192 Power-Off_Retract_Count 0x0032 194 194 000 Old_age Always - 4899
      193 Load_Cycle_Count 0x0032 104 104 000 Old_age Always - 290947
      194 Temperature_Celsius 0x0022 106 089 000 Old_age Always - 37
      196 Reallocated_Event_Count 0x0032 199 008 000 Old_age Always - 1
      197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 3
      198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
      199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
      200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
      240 Head_Flying_Hours 0x0032 087 087 000 Old_age Always - 9526


      SMART Error Log Version: 1
      No Errors Logged SMART


      Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed without error 00% 0 -


      SMART Selective self-test log data structure revision number
      1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing
      2 0 0 Not_testing
      3 0 0 Not_testing
      4 0 0 Not_testing
      5 0 0 Not_testing
      Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
      If Selective self-test is pending on power-up, resume after 0 minute delay.

      Rechtschreibfehler sind beabsichtigt, sie fördern ein genaueres Lesen
      Debug Log aktivieren Putty Telnet Screenshots erstellen