Geräusche beim Start & fehlerhafte mountmeldungen internal flash

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Geräusche beim Start & fehlerhafte mountmeldungen internal flash

      Hallo Gemeinde,

      da ich beim Start der box ab und zu "hackende" Geräusche höre, habe ich mal nachgesehen ob was mit der Festplatte (1TB HDD) nicht stimmt.
      ich hb nix gefunde, weiss aber auch nicht wie man dafür unter enigma die SMART Statistik auslesen kann.
      Wie geht das ?

      A B E R
      in den kernel messages hab ich fehler zum mount der flash partitionen ????!!!!


      Auszug aus dmesg etc.

      Quellcode

      1. [ 2.257882] Waiting for root device /dev/mmcblk0p4...
      2. [ 2.519484] mmc1: BKOPS_EN bit is not set
      3. [ 2.529729] mmc1: new high speed MMC card at address 0001
      4. [ 2.535527] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
      5. [ 2.540171] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
      6. [ 2.546200] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
      7. [ 2.555623] mmcblk0: p1 p2 p3 p4
      8. [ 2.561743] mmcblk0boot1: unknown partition table
      9. [ 2.567560] mmcblk0boot0: unknown partition table
      10. [ 2.586598] EXT3-fs (mmcblk0p4): error: couldn't mount because of unsupported optional features (240)
      11. [ 2.596463] EXT4-fs (mmcblk0p4): Mount option "data=journal" incompatible with ext2
      12. [ 2.604711] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
      13. [ 2.619570] EXT4-fs (mmcblk0p4): warning: maximal mount count reached, running e2fsck is recommended
      14. [ 2.629178] EXT4-fs (mmcblk0p4): mounted filesystem with journalled data mode. Opts: data=journal
      15. [ 2.638094] VFS: Mounted root (ext4 filesystem) on device 179:4.
      16. [ 2.644727] devtmpfs: mounted
      17. df -h
      18. Filesystem Size Used Available Use% Mounted on
      19. /dev/root 3.5G 688.6M 2.6G 20% /
      20. devtmpfs 435.6M 0 435.6M 0% /dev
      21. tmpfs 443.7M 440.0K 443.3M 0% /run
      22. tmpfs 443.7M 72.0K 443.6M 0% /var/volatile
      23. /dev/sda1 916.8G 289.9G 580.3G 33% /media/hdd
      24. blkid
      25. /dev/sda1: UUID="8b79d7af-f322-4449-880a-339e6693faeb" TYPE="ext4" PARTUUID="3714cd69-01"
      26. /dev/mmcblk0: PTUUID="fb7292f4-c05c-4b89-9590-44679a893772" PTTYPE="gpt"
      27. /dev/mmcblk0p1: PARTLABEL="kernel" PARTUUID="6217ed1a-be21-436a-a6c8-9c3c9d6a5e8f"
      28. /dev/mmcblk0p2: PARTLABEL="initrd" PARTUUID="10341b96-2512-4464-8a58-4c7adf7c561e"
      29. /dev/mmcblk0p3: PARTLABEL="splash" PARTUUID="239405fe-fc5e-49d6-8eb5-8a00298f673d"
      30. /dev/mmcblk0p4: UUID="266e5792-8e05-45f9-9c73-cfbd1445ccef" TYPE="ext4" PARTLABEL="rootfs" PARTUUID="df0a60bf-33e4-451e-870d-7b13e86261c7"
      31. mount
      32. rootfs on / type rootfs (rw)
      33. /dev/root on / type ext4 (rw,relatime,nodelalloc,data=journal)
      34. devtmpfs on /dev type devtmpfs (rw,relatime,size=446044k,nr_inodes=55087,mode=755)
      35. proc on /proc type proc (rw,relatime)
      36. sysfs on /sys type sysfs (rw,relatime)
      37. debugfs on /sys/kernel/debug type debugfs (rw,relatime)
      38. tmpfs on /run type tmpfs (rw,nosuid,nodev,mode=755)
      39. tmpfs on /var/volatile type tmpfs (rw,relatime)
      40. devpts on /dev/pts type devpts (rw,relatime,gid=5,mode=620)
      41. /dev/sda1 on /media/hdd type ext4 (rw,relatime,data=ordered)
      42. /etc/auto.hotplug on /autofs type autofs (rw,relatime,fd=5,pgrp=1016,timeout=5,minproto=5,maxproto=5,indirect)
      Alles anzeigen



      Gruss und Dank
      Kalle
      --------------------------------------------------------------------------------------------
      We are all stupid, just on different subjects
      ~ Mark Twain ~

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von kv99 ()

    • smart werte auslesen habe ich mittlerweile gefunden...
      smartctl --all /dev/sda

      aber was ist mit den mount meldungen auf den p0 und p1 partitionen ?

      UND wie mach ich einen e2fsck auf der p4 ? Das ist ja die boot partition, die kann ich nicht un-mounten.
      --------------------------------------------------------------------------------------------
      We are all stupid, just on different subjects
      ~ Mark Twain ~
    • Nüscht is damit - is wohl normal, die Meldungen hab ich auch, und das seit einigen Jahren.

      p0 gibt's schon mal nicht, und p1 und p2 sind nicht zum mounten gedacht.

      Auf p1 ist wohl das zImage untergebracht (also der Kernel), auf p2 wohl die init-Ramdisk, auf p3 befindet sich das Boot-Splash. Könnte man aber im Automatic-Fullback-Plugin noch einmal nachschauen.

      Edit: einen fsck auf p4 kannst du wohl nicht ohne weiteres durchführen, da würdest du neu flashen müssen (kannst ja ein Backup neu flashen) - dann hast ein sauberes Filesystem.
      Diskutiere nie mit einem Idioten. Er zieht dich auf sein Niveau runter und schlägt dich mit seiner Erfahrung.

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von rdamas ()

    • rdamas schrieb:




      p0 gibt's schon mal nicht..........



      ......kannst ja ein Backup neu flashen) - dann hast ein sauberes Filesystem.
      rdamas,
      korrekt p0 gibts net...mein fehler
      und die idee mit neu flashen ist gut....wobei ich eben mal nachgesehen habe: der max mount count für /dev/mmcblk0p4 teht auf 25 !!! bissl wenig finde ich.
      wie auch immer
      merci
      gruss kalle
      --------------------------------------------------------------------------------------------
      We are all stupid, just on different subjects
      ~ Mark Twain ~