Hi all,
i leaped recently from Dreambox 800 to VU uno 4k SE.
i immediatly flashed the latest vti 13.0.9 and i have a few issues:
1. The time is not set automatically after reboot. i need to run manually the ntpupdate from the vti pannel.
*my setup box is twin dvb-s2x tunner + dvb-t/t2 usb rtl238x tuner and the box boot either to dvb-t channel or iptv, not sat channel (sat ch. working btw)
2. I've connected a usb tuner, model Astrometa DVB-T2, the device is recognized on the tuners, but i get an error when trying to scan.
i've disabled all tuners, shut down for a 1min and turn it on, worked once and i managed to scan and view, but only dvb-t channels, not T2.
the problem is after reboot, all dvb-t channels aren't working (grayed), tuner is shown on tuners, but again the error when trying to scan dvb-t.
on dmesg log, the device is identified
Spoiler anzeigen
3. HDMI outputs inferior picture compared to a streamed one or my dm. tried all picture settings, 10b,12b, 420,444. still looks like low 8bit pic,
not bt2020. RGB results in blank screen. my dreambox is still connected so i've compared the two. All is connected to a SONY X90E.
4. The popular x265 10bit files won't play, which is weird, every 30$ android arm based box runs them.
the dlna browser even won't show those files, tried vti's Kodi, blank screen when trying to play them, no audio either.
how can i use change the built in player for Kodi so it will use vlc.
since it's Linux, i suppose codecs & compatible player can be compiled and installed for this model. does anyone knows and refer to a link?
can anyone help please
thanks
i leaped recently from Dreambox 800 to VU uno 4k SE.
i immediatly flashed the latest vti 13.0.9 and i have a few issues:
1. The time is not set automatically after reboot. i need to run manually the ntpupdate from the vti pannel.
*my setup box is twin dvb-s2x tunner + dvb-t/t2 usb rtl238x tuner and the box boot either to dvb-t channel or iptv, not sat channel (sat ch. working btw)
2. I've connected a usb tuner, model Astrometa DVB-T2, the device is recognized on the tuners, but i get an error when trying to scan.
i've disabled all tuners, shut down for a 1min and turn it on, worked once and i managed to scan and view, but only dvb-t channels, not T2.
the problem is after reboot, all dvb-t channels aren't working (grayed), tuner is shown on tuners, but again the error when trying to scan dvb-t.
on dmesg log, the device is identified
[ 2.297044] usb 4-1: dvb_usb_v2: found a 'Astrometa DVB-T2' in warm state
[ 2.346688] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
[ 2.381868] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2.391352] DVB: registering new adapter (Astrometa DVB-T2)
[ 2.406439] random: dd urandom read with 21 bits of entropy available
[ 2.419575] i2c i2c-0: Added multiplexed i2c bus 1
[ 2.424399] rtl2832 0-0010: Realtek RTL2832 successfully attached
[ 2.435213] usb 4-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 2.451672] r820t 1-003a: creating new instance
[ 2.468400] r820t 1-003a: Rafael Micro r820t successfully identified
[ 2.490936] Registered IR keymap rc-empty
[ 2.496049] input: Astrometa DVB-T2 as /devices/platform/rdb/f0470500.ehci_v2/usb4/4-1/rc/rc0/input0
[ 2.507722] rc0: Astrometa DVB-T2 as /devices/platform/rdb/f0470500.ehci_v2/usb4/4-1/rc/rc0
[ 2.518774] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input1
[ 2.530397] usb 4-1: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 2.546013] usb 4-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
[ 2.554505] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 2.714795] procmk_init
[ 2.719287] bcm_event: module license 'Proprietary' taints kernel.
[ 2.719295] Disabling lock debugging due to kernel taint
[ 2.945646] nexus.ko: virtual irq: enabled (273)
[ 2.945686] nexus.ko: shared gpio banks: enabled
[ 6.031706] DVB: registering new adapter (_vuplus_uno4kse_)
[ 2.346688] EXT4-fs (mmcblk0p4): re-mounted. Opts: nodelalloc,data=journal
[ 2.381868] usb 4-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 2.391352] DVB: registering new adapter (Astrometa DVB-T2)
[ 2.406439] random: dd urandom read with 21 bits of entropy available
[ 2.419575] i2c i2c-0: Added multiplexed i2c bus 1
[ 2.424399] rtl2832 0-0010: Realtek RTL2832 successfully attached
[ 2.435213] usb 4-1: DVB: registering adapter 1 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 2.451672] r820t 1-003a: creating new instance
[ 2.468400] r820t 1-003a: Rafael Micro r820t successfully identified
[ 2.490936] Registered IR keymap rc-empty
[ 2.496049] input: Astrometa DVB-T2 as /devices/platform/rdb/f0470500.ehci_v2/usb4/4-1/rc/rc0/input0
[ 2.507722] rc0: Astrometa DVB-T2 as /devices/platform/rdb/f0470500.ehci_v2/usb4/4-1/rc/rc0
[ 2.518774] input: MCE IR Keyboard/Mouse (dvb_usb_rtl28xxu) as /devices/virtual/input/input1
[ 2.530397] usb 4-1: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 2.546013] usb 4-1: dvb_usb_v2: 'Astrometa DVB-T2' successfully initialized and connected
[ 2.554505] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 2.714795] procmk_init
[ 2.719287] bcm_event: module license 'Proprietary' taints kernel.
[ 2.719295] Disabling lock debugging due to kernel taint
[ 2.945646] nexus.ko: virtual irq: enabled (273)
[ 2.945686] nexus.ko: shared gpio banks: enabled
[ 6.031706] DVB: registering new adapter (_vuplus_uno4kse_)
not bt2020. RGB results in blank screen. my dreambox is still connected so i've compared the two. All is connected to a SONY X90E.
4. The popular x265 10bit files won't play, which is weird, every 30$ android arm based box runs them.
the dlna browser even won't show those files, tried vti's Kodi, blank screen when trying to play them, no audio either.
how can i use change the built in player for Kodi so it will use vlc.
since it's Linux, i suppose codecs & compatible player can be compiled and installed for this model. does anyone knows and refer to a link?
can anyone help please
thanks
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von hgdo ()