Vu+Ultimo 4K Problem with the HDMI input and Restore Image Saved or Download and restore image without using USB key

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Vu+Ultimo 4K Problem with the HDMI input and Restore Image Saved or Download and restore image without using USB key

      :cursing:
      1) HDMI In:
      a) Loss of sound when doing a splitscreen
      b) Loss of sound when recording to the HDMI In input and zapping to watch another channel
      c) No access to the audio setting of the AudioSelection Menu
      d) no picon provided for HDMI In input, If we add a Picon with the reference number 8192_0_1_0_0_0_0_0_0_0.png it is not recognized

      2) The Image Restore Menu no longer exists, No possibility to Restore a Saved Image (without using a USB Key) as was the case with the VU + Ultimo

      3) The Menu Image: Image Flash Tool no longer exists, no possibility to Download an Image from the site Vu + and install it as was the case with the VU + Ultimo :cursing:
    • Rabah wrote:

      2) The Image Restore Menu no longer exists, No possibility to Restore a Saved Image (without using a USB Key) as was the case with the VU + Ultimo
      That is normal for all 4K boxes. You have to use an USB stick to restore an image.
      You can use the plugin AutomaticFullBackup to save an image and to restore it without an USB stick.

      Rabah wrote:

      3) The Menu Image: Image Flash Tool no longer exists, no possibility to Download an Image from the site Vu + and install it as was the case with the VU + Ultimo
      Also this is not possible with 4K boxes.
    • Thank you for your answer

      I had read this

      [IMAGE] VTI 11.0.X for VU + ULTIMO 4K
      New VTi - Vu + Team Image - VTi 11.0.x

      Support for full backup and restore (not Vu + Solo 4K / Uno 4K)
      Supports VTi flash image online (not Vu + Solo 4K / Uno 4K)


      here [url='https://www.vuplus4k.com/image-vti-11-0-x-for-vu-ultimo-4k/'][IMAGE] VTI 11.0.X for VU+ ULTIMO 4K – VUPLUS4K[/url]


      and I'm sure that what a plugin can do can be integrated into an upcoming version of Image.
      for now I'm going to try this plugin


      Thank you[/image]
    • 1) HDMI In with VTi Image 13.0.4:

      a) Loss of sound when doing a splitscreen solved with the image version VTi 13.0.3

      b) Loss of sound when recording to the HDMI In input and zapping to watch another channel solved with the image version VTi 13.0.3



      2) AudioSelection Menu:

      a) No access to the audio setting of the AudioSelection Menu

      b) No display of the audio format

      c) When pressing the red, yellow or blue buttons displayed, have lost the sound

      d) Other menu settings are not accessible

      e) In the InfoBar no display of the video resolution or the audio format. all the information displayed is that of the channel previously viewed.

      3) no picon provided for HDMI In input, If we add a Picon with the reference number 8192_0_1_0_0_0_0_0_0_0.png it is recognized in service list but not in InfoBar

      4) The image restoration menu is still not implemented (as planned in the Ultimo4K launch brochure). No possibility to Restore a Saved Image (without using a USB Key) as was the case with the VU+ Ultimo

      5) The Menu Image: Image Flash Tool is still not implemented (as planned in the Ultimo4K launch brochure). no possibility to Download an Image from the site Vu + and install it as was the case with the VU+ Ultimo


      1) HDMI In mit VTi Image 13.0.4:
      a) Klangverlust beim Splitscreen mit der Image Version VTi 13.0.3 behoben
      b) Verlust von Ton bei der Aufnahme an den HDMI In-Eingang und
      Zapping, um einen anderen mit der Bildversion VTi 13.0.3 gelösten Kanal
      zu sehen

      2) Audioauswahlmenü:
      a) Kein Zugriff auf die Audioeinstellungen des AudioSelection-Menüs
      b) Keine Anzeige des Audioformats
      c) Wenn die angezeigten roten, gelben oder blauen Tasten gedrückt werden, ist der Ton verloren gegangen
      d) Andere Menüeinstellungen sind nicht zugänglich
      e) In der InfoBar keine Anzeige der Videoauflösung oder des Audioformats. Alle angezeigten Informationen entsprechen denen des zuvor angesehenen Kanals.

      3) Kein Picon für den Eingang HDMI In Wenn wir ein Picon mit der
      Referenznummer 8192_0_1_0_0_0_0_0_0_0.png hinzufügen, wird es in der
      Serviceliste, aber nicht in der InfoBar erkannt


      4) Das Bildwiederherstellungsmenü ist noch nicht implementiert (wie in der Startbroschüre von Ultimo4K geplant). Keine Möglichkeit, ein gespeichertes Bild wiederherzustellen (ohne
      einen USB-Schlüssel zu verwenden), wie es bei der VU + Ultimo der Fall
      war


      5) Das Menu Image: Image Flash Tool ist immer noch nicht implementiert (wie in der Startbroschüre von Ultimo4K geplant). Es
      besteht keine Möglichkeit, ein Image von der Website Vu +
      herunterzuladen und es zu installieren, wie es bei der VU + Ultimo der
      Fall war