Flashen über Nullmodem- bzw Seriellem Kabel?

    Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

    • Petry1 schrieb:

      Besorg dir aber ne neue Fernbedienung, kostet ca 29 € + Versand beim Boardsponsor.
      Die FB ist von einer anderen Duo², und dort läuft die. Ich denke nicht dass die FB defekt ist, noch nicht.


      dg4sj schrieb:

      die Geschwindigkeit ist 115200 auf dem seriellen Anschluss und da ist einiges zu sehen.
      Ich wünschte das wäre bei mir auch so. An welchem Receiver ist das?

    • Top. Und das ganze mit einem Nullmodemkabel direkt am Rechner angeschossen?
      Ich hab mir jetzt den Adapter geholt. Morgen via Amazon Prime wird der hoffenltich angekommen. Und dann bin ich gespannt ob es läuft.

      Momentan ist es echt ein Glücksspiel ob die Duo² was macht oder nicht. Vorhin konnte ich die VTi 9.0 flashen, aber im Wizard keine Reaktion. Dann der Tip mit dem orig. Image, aber wieder das gleiche, Power-Taste wird gedrückt aber 0 Reaktion. Ich warte mal bis morgen ab.

    • Das hab ich tatsächlich glatt übersehen. Danke!

      plnick schrieb:

      Es wir der Tastendruck auf der Duo2 nicht erkannt.

      Lege eine leere Datei force.update in den Ordner /vuplus/duo2 am USB Stick und flash
      Und das funktioniert ja wirklich, geniale Idee !!!

      Das Problem mit der FB allerdings besteht aber immer noch.
      Zumindest kann ich jetzt aber mit dieser Methode den Flashvorgang "forcen".

    • Und wenn Du jetzt noch weiter suchst, findest Du noch einen Tip zur neuen Fernbedienung.
      Das Leben kann so einfach sein.
      ┌────────────────────────────┐
      KliFoeikle!
      └────────────────────────────┘

    • renser schrieb:

      Also ...

      1. Auch kein Zugriff mit FileZilla möglich?

      2. Wie alt ist die Box?

      3. Nach dem einschalten - läuft der Lüfter kurz auf "hochform"?

      4. Ist die Box magnetischen Feldern ausgesetzt worden?

      5. Versehentlich falsches Image Image installiert?

      6. Wie weit startet/fährt sie über haupt hoch?

      Und was ganz wichtig ist:
      7. Was hast du zuletzt an der Box gemacht?
      Sorry renser, wollte dich nicht im Regen stehen lassen.
      1. Nein, weder mit FileZilla, FlashFXP oder WinSCP.
      2. Ca. 3-4 Jahre. Genau weiß ich es nicht.
      3. 0-10 Sek. = Lüfter aus. 11-20 Sek. = Lüfter Max. Aber der 21. Sek läuft der Lüfter dann normal weiter.
      4. Nein. Links steht mein Haustelefon und mein Akkuladegerät. Abstand ca 10-15cm. Hatte aber auch die Kiste wo anders gehabt, aber ohne Erfolg.
      5. Nein, da pass ich immer auf. Die Images zieh' ich immer von hier. Und das jetzige Original Image hab von code.vuplus.com
      6. Nachdem ich mit dem Wizard fertig war, bis ganz nach oben. Wenn die FB dann mal funktioniert hat, konnte ich ganz normal ins Menü usw. Jetzt aktuell, wo ich die orig. Firmware geflasht habe (danke nochmal für den Tip mit der Datei!) nur bis zum Wizard mit der Video input Selection.
      7. Nichts. Ganz normal TV geschaut. Beim nächsten einschalten war dann sporadisch kein Netzwerk vorhanden, bishin zu dem Punkt wo ich jetzt bin. LAN ohne Funktion. WLAN läuft hervorragend.
      Und wie schonmal erwähnt, hatte ich die Duo² jetzt auch bei 2 verschiedenen Leuten. Alle beide mit einem ganz einfachen Netzwerk wo nur eine Fritte vorhanden ist mit 2-3 Geräten die an der Fritte verbunden sind.

      t-j schrieb:

      Und wenn Du jetzt noch weiter suchst, findest Du noch einen Tip zur neuen Fernbedienung.
      Das einzige was ich jetzt noch finde ist mir eine neue zu kaufen. Das lehne ich aber ab. Die FB läuft an anderen Duo² Receiver ohne zu zicken.
      Das einzige was mir jetzt noch einfallen würde, wenn überhaupt, wäre die FB zu resetten. Wenn das überhaupt möglich ist.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Cilow ()

    • Wenn die Powertaste hinter der Frontblende nicht reagiert & die Fernbedienung
      (die aktuell an einer ander VU einwandfrei funktioniert) nur sporadisch,
      könnte das tatsächlich ein Hardwareproblem sein.
      Selbst kann man hier aber nur mal die Steckverbindungen zwischen
      Frontpaneel & Motherboard (natürlich bei gezogenen Stromstecker!!!)
      prüfen. Der Rest wär ein Fall für einen Fachmann.
      Diesbezüglich vielleicht HM-Sat per e-Mail kontaktieren.

      Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von Radar ()

    • Ja, ich vermute auch immer mehr, dass es die Hardware ist die ein an der Waffel hat.
      Der Adapter ist angekommen und siehe da, der Log funktioniert.
      Ich hoffe sehr dass sich das jemand mal genauer anschauen kann, in der Hoffnung dass auch Fehler gefunden werden.
      Die Duo² ist frisch geflasht, und startet mit dem Wizard (Video input selection).

      Die Liste ist nicht gerade kurz, aber ich wäre froh wenn sich meine Vermutungen bestätigen würde oder zumindest man herausfindet wo genau es harpert.

      Quellcode

      1. BCM74250012
      3. M0
      4. M1
      5. 01CZL2=1
      6. LLMB=0000C000
      7. BP=02000000
      8. L2Cfg=1E7AD627
      9. L2Buf=77707711
      10. BrCfg=F01C200E
      11. BrMod=02800801
      12. BrZp0=44000000
      13. BrZp1=00002000
      14. #@
      16. CFE ver 2.333.20130710, Endian Mode: Little
      17. Build Date: Mon Jul 15 19:29:18 2013 Vuplus Team
      18. Copyright (C) Broadcom Corporation.
      20. ******************************************
      21. CPU speed: 1305MHz
      22. DDR Frequency: 800 MHz
      23. DDR Mode: DDR3
      24. Total memory(MEMC 0): 1024MB
      25. MEMC 0 DDR Width: 32
      26. Total memory(MEMC 1): 1024MB
      27. MEMC 1 DDR Width: 32
      28. Boot Device: NAND
      29. Total flash: 512MB
      30. RTS VERSION: 20120919184252_7425_single_encode
      31. ETH0_PHY: RGMII
      32. ETH0_MDIO_MODE: 1
      33. ETH0_SPEED: 1000
      34. ETH0_PHYADDR: probe
      36. SCB CLOCK = 277MHz
      37. Initializing USB.
      38. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
      39. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
      40. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
      41. USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
      43. CFE initialized.
      44. USB: New device connected to bus 3 hub 1 port 1
      45. USB: Resetting device on bus 3 hub 1 port 1
      46. USB: Locating Class FF Vendor 148F Product 5372: Driver not found.
      47. waiting for usb...done
      48. checking usb
      49. No Priority Usb
      50. checking front key
      51. Checking usbdisk0:/vuplus/duo2/ignore.update......NO
      52. Checking usbdisk0:/vuplus/duo2/force.update......NO
      53. Checking usbdisk0:/vuplus/duo2/cfe_cfe_auto.bin......NO
      54. Checking usbdisk0:/vuplus/duo2/root_cfe_auto.bin......NO
      55. Checking usbdisk0:/vuplus/duo2/splash_cfe_auto.bin......NO
      56. Checking usbdisk0:/vuplus/duo2/kernel_cfe_auto.bin......NO
      57. Starting splash screen.
      58. Found splash image - Width = 720 Height = 480
      59. Non Interlaced Replace list 043f8100 0c800000Interlaced Replace list 043f86a0 0c8005a0
      60. Loader:elf Filesys:raw Dev:flash0.kernel File: Options:ubiroot rootflags=sync bmem=192M@64M bmem=458M@512M memc1=590M
      61. Loading: 0x80001000/7908224 0x8078bb80/164048 Entry address is 0x805d5960
      62. Starting program at 0x805d5960
      64. Linux version 3.13.5 (vuplus@vuplus) (gcc version 4.9.2 (GCC) ) #1 SMP Tue Oct 20 20:44:34 KST 2015
      65. Fetching vars from bootloader... found 17 vars.
      66. Options: moca=0 sata=1 pcie=0 usb=1
      67. Using 1024 MB + 1024 MB RAM (from CFE)
      68. bootconsole [early0] enabled
      69. CPU0 revision is: 00025a11 (Broadcom BMIPS5000)
      70. FPU revision is: 00130001
      71. Determined physical RAM map:
      72. memory: 10000000 @ 00000000 (usable)
      73. memory: 30000000 @ 20000000 (usable)
      74. memory: 31400000 @ 90000000 (usable)
      75. bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
      76. bmem: adding 384 MB RESERVED region at 512 MB (0x18000000@0x20000000)
      77. Zone ranges:
      78. Normal [mem 0x00000000-0x4fffffff]
      79. HighMem [mem 0x50000000-0xc13fffff]
      80. Movable zone start for each node
      81. Early memory node ranges
      82. node 0: [mem 0x00000000-0x0fffffff]
      83. node 0: [mem 0x20000000-0x4fffffff]
      84. node 0: [mem 0x90000000-0xc13fffff]
      85. Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
      86. Primary data cache 32kB, 4-way, linesize 32 bytes.
      87. MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
      88. PERCPU: Embedded 7 pages/cpu @82012000 s7040 r8192 d13440 u32768
      89. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 461824
      90. Kernel command line: libata.force=1:1.5Gbps bmem=192M@64M bmem=384M@512M memc1=788M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync
      91. PID hash table entries: 4096 (order: 2, 16384 bytes)
      92. Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
      93. Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
      94. Memory: 1240468K/1855488K available (6011K kernel code, 308K rwdata, 1192K rodata, 216K init, 143K bss, 615020K reserved, 806912K highmem)
      95. Hierarchical RCU implementation.
      96. NR_IRQS:160
      97. Measuring MIPS counter frequency...
      98. Detected MIPS clock frequency: 1305 MHz (163.125 MHz counter)
      99. Calibrating delay loop... 864.25 BogoMIPS (lpj=432128)
      100. pid_max: default: 32768 minimum: 301
      101. Mount-cache hash table entries: 512
      102. SMP: Booting CPU1...
      103. CPU1 revision is: 00025a11 (Broadcom BMIPS5000)
      104. FPU revision is: 00130001
      105. Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
      106. Primary data cache 32kB, 4-way, linesize 32 bytes.
      107. MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
      108. SMP: CPU1 is running
      109. Brought up 2 CPUs
      110. devtmpfs: initialized
      111. bmem: adding extra 236 MB RESERVED region at 3092 MB (0x0ec00000@0xc1400000)
      112. NET: Registered protocol family 16
      113. USB0: power enable is active high; overcurrent is active low
      114. USB1: power enable is active high; overcurrent is active low
      115. bio: create slab <bio-0> at 0
      116. SCSI subsystem initialized
      117. usbcore: registered new interface driver usbfs
      118. usbcore: registered new interface driver hub
      119. usbcore: registered new device driver usb
      120. Advanced Linux Sound Architecture Driver Initialized.
      121. cfg80211: Calling CRDA to update world regulatory domain
      122. Switched to clocksource wktmr
      123. FS-Cache: Loaded
      124. NET: Registered protocol family 2
      125. TCP established hash table entries: 8192 (order: 3, 32768 bytes)
      126. TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
      127. TCP: Hash tables configured (established 8192 bind 8192)
      128. TCP: reno registered
      129. UDP hash table entries: 512 (order: 2, 16384 bytes)
      130. UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
      131. NET: Registered protocol family 1
      132. RPC: Registered named UNIX socket transport module.
      133. RPC: Registered udp transport module.
      134. RPC: Registered tcp transport module.
      135. RPC: Registered tcp NFSv4.1 backchannel transport module.
      136. bounce pool size: 64 pages
      137. NFS: Registering the id_resolver key type
      138. Key type id_resolver registered
      139. Key type id_legacy registered
      140. nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      141. Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
      142. msgmni has been set to 846
      143. io scheduler noop registered
      144. io scheduler cfq registered (default)
      145. Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
      146. console [ttyS0] enabledMMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
      147. console [ttyS0] enabled
      148. bootconsole [early0] disabled
      149. bootconsole [early0] disabled
      150. serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
      151. serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
      152. loop: module loaded
      153. ahci strict-ahci.0: can't get clock
      154. ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
      155. ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
      156. ahci strict-ahci.0: flags: ncq sntf stag clo slum part
      157. scsi0 : ahci_platform
      158. scsi1 : ahci_platform
      159. ata1: FORCE: PHY spd limit set to 1.5Gbps
      160. ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
      161. ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
      162. brcmstb_nand: NAND controller driver is loaded
      163. Found PHY at Address 3
      164. bcmgenet: configuring instance #0 for external RGMII
      165. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      166. ata1: SATA link down (SStatus 0 SControl 310)
      167. ehci-brcm ehci-brcm.0: Broadcom STB EHCI
      168. ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
      169. ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
      170. ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
      171. hub 1-0:1.0: USB hub found
      172. hub 1-0:1.0: 1 port detected
      173. ehci-brcm ehci-brcm.1: Broadcom STB EHCI
      174. ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
      175. ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
      176. ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
      177. hub 2-0:1.0: USB hub found
      178. hub 2-0:1.0: 1 port detected
      179. ehci-brcm ehci-brcm.2: Broadcom STB EHCI
      180. ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
      181. ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
      182. ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
      183. hub 3-0:1.0: USB hub found
      184. hub 3-0:1.0: 1 port detected
      185. ehci-brcm ehci-brcm.3: Broadcom STB EHCI
      186. ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
      187. ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
      188. ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
      189. hub 4-0:1.0: USB hub found
      190. hub 4-0:1.0: 1 port detected
      191. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      192. ohci-brcm ohci-brcm.0: Broadcom STB OHCI
      193. ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
      194. ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
      195. hub 5-0:1.0: USB hub found
      196. hub 5-0:1.0: 1 port detected
      197. ohci-brcm ohci-brcm.1: Broadcom STB OHCI
      198. ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
      199. ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
      200. ata2: SATA link down (SStatus 0 SControl 300)
      201. hub 6-0:1.0: USB hub found
      202. hub 6-0:1.0: 1 port detected
      203. ohci-brcm ohci-brcm.2: Broadcom STB OHCI
      204. ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
      205. ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
      206. hub 7-0:1.0: USB hub found
      207. hub 7-0:1.0: 1 port detected
      208. ohci-brcm ohci-brcm.3: Broadcom STB OHCI
      209. ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
      210. ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
      211. usb 4-1: new high-speed USB device number 2 using ehci-brcm
      212. hub 8-0:1.0: USB hub found
      213. hub 8-0:1.0: 1 port detected
      214. usbcore: registered new interface driver usb-storage
      215. mousedev: PS/2 mouse device common for all mice
      216. i2c /dev entries driver
      217. IR NEC protocol handler initialized
      218. IR RC5(x) protocol handler initialized
      219. IR RC6 protocol handler initialized
      220. IR JVC protocol handler initialized
      221. IR Sony protocol handler initialized
      222. IR RC5 (streamzap) protocol handler initialized
      223. IR SANYO protocol handler initialized
      224. IR MCE Keyboard/mouse protocol handler initialized
      225. sdhci: Secure Digital Host Controller Interface driver
      226. sdhci: Copyright(c) Pierre Ossman
      227. sdhci-pltfm: SDHCI platform and OF driver helper
      228. hidraw: raw HID events driver (C) Jiri Kosina
      229. usbcore: registered new interface driver usbhid
      230. usbhid: USB HID core driver
      231. TCP: cubic registered
      232. NET: Registered protocol family 17
      233. Key type dns_resolver registered
      234. PM: CP0 COUNT/COMPARE frequency does not depend on divisor
      235. EBI CS0: setting up NAND flash (primary)
      236. NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
      237. NAND device: 1024MiB, SLC, page size: 2048, OOB size: 64
      238. brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
      239. Bad block table found at page 524224, version 0x01
      240. Bad block table found at page 524160, version 0x01
      241. nand_read_bbt: bad block at 0x000011300000
      242. nand_read_bbt: bad block at 0x00001a080000
      243. nand_read_bbt: bad block at 0x00001c620000
      244. nand_read_bbt: bad block at 0x00001d6a0000
      245. nand_read_bbt: bad block at 0x00003caa0000
      246. Creating 4 MTD partitions on "brcmnand.0":
      247. 0x000002700000-0x000040000000 : "rootfs"
      248. 0x000002700000-0x000040000000 : "rootfs(redundant)"
      249. 0x000000200000-0x000000900000 : "kernel"
      250. 0x000000900000-0x000000b00000 : "mac"
      251. UBI: attaching mtd0 to ubi0
      252. random: nolblocking pool is initialized
      253. UBI: scanning is finished
      254. UBI: attached mtd0 (name "rootfs", size 985 MiB) to ubi0
      255. UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
      256. UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
      257. UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
      258. UBI: good PEBs: 7871, bad PEBs: 9, corrupted PEBs: 0
      259. UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
      260. UBI: max/mean erase counter: 25/14, WL threshold: 4096, image sequence number: 344843720
      261. UBI: available PEBs: 0, total reserved PEBs: 7871, PEBs reserved for bad PEB handling: 151
      262. UBI: background thread "ubi_bgt0d" started, PID 52
      263. ALSA device list:
      264. No soundcards found.
      266. UBIFS: parse sync
      267. UBIFS: background thread "ubifs_bgt0_0" started, PID 55
      268. UBIFS: recovery needed
      269. UBIFS: recovery completed
      270. UBIFS: mounted UBI device 0, volume 0, name "rootfs"
      271. UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
      272. UBIFS: FS size: 978350080 bytes (933 MiB, 7705 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
      273. UBIFS: reserved for root: 0 bytes (0 KiB)
      274. UBIFS: media format: w4/r0 (latest is w4/r0), UUID 872C87C0-90DA-45FE-9C9A-30EE282C47F6, small LPT model
      275. VFS: Mounted root (ubifs filesystem) on device 0:12.
      276. devtmpfs: mounted
      277. Freeing unused kernel memory: 216K (8075a000 - 80790000)
      278. INIT: version 2.88 booting
      280. Please wait: booting...
      281. FUSE exfat 1.1.0
      282. Starting udev
      283. udevd[100]: starting version 182
      284. UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
      285. rtusb init rt2870 --->
      288. === pAd = e035d000, size = 511144 ===
      290. <-- RTMPAllocTxRxRingMemory, Status=0
      291. <-- RTMPAllocAdapterBlock, Status=0
      292. usbcore: registered new interface driver rt2870
      293. net.ipv4.conf.default.rp_filter = 1
      294. net.ipv4.conf.all.rp_filter = 1
      295. Starting vuplus-platform-utilprocmk_init
      296. bcm_event: module license 'Proprietary' taints kernel.
      297. Disabling lock debugging due to kernel taint
      298. DVB: registering new adapter (_vuplus_duo2_)
      299. bcm7424: hotplug_callback():
      300. Hotplug - status.connected 1:0:0
      301. bcm7424: hotplug_callback():
      302. Hotplug - connecting HDMI to display 0xe
      303. [GPIO]Default
      304. [GP]:brcm_pwm_init
      306. bcm7424: hotplug_callback():
      307. Hotplug - status.connected 1:1:0
      308. brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      309. [MPVR]: >> misc_pvr_init
      310. [VID]: 6bcm7335_video_init
      311. [AUD]: 6bcm7335_audio_init
      312. bcm7424: bcm7335_frontend_init(): vtuner1 : 1
      313. BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      314. BKNI_Malloc(linuxkernel) top users:
      315. blocks, bytes, filename:line
      316. 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
      317. 407, 29304, magnum/commonutils/mrc/src/bmrc_monitor.c:666
      318. KSEG1 : 0x80000000
      319. lcr 0x3
      320. irq : 63 ret : 0
      321. input: dreambox advanced remote control (native) as /devices/virtual/input/input0
      322. Resistor Div: 0x0
      323. Duo2 LCD initialized 0
      324. [LCD]: registered
      325. [CI]: registered ci0 249
      326. [CI]: registered ci1 248
      327. [CI]: CI interface initialised
      329. [DFP]: registered dbox fp
      330. [DFP]: Scart 9597 is found 0
      332. [SC]: registered sci0
      333. [SC]: registered sci1
      334. system_time_set wakeup mode get
      335. system_time_set wakeup mode get 0x72
      336. FP Update Driver Loaded
      337. VFDController Update Driver Loaded
      338. BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
      339. BKNI_Malloc(linuxkernel) top users:
      340. blocks, bytes, filename:line
      341. 1655, 363844, BSEAV/lib/utils/balloc.c:31
      342. 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
      343. .
      344. Displaying bootlogo.
      345. INIT: Entering runlevel: 3
      346. [VID]: VIDEO_SET_STREAMTYPE 0
      347. [VID]: VIDEO_SELECT_SOURCE 1 0
      348. [VID]: VIDEO_PLAY 1 2 0
      349. [VID]: VIDEO_CONTINUE 1 1
      350. [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      351. Configuring network interfaces... [VID]: VIDEO_STOP 0 1
      352. [VID]: VIDEO_SELECT_SOURCE 0 0
      353. udhcpc (v1.23.2) started
      354. bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
      355. Sending discover...
      356. Sending discover...
      357. Sending discover...
      358. No lease, forking to background
      359. done.
      360. Starting system message bus: dbus.
      361. Starting Dropbear SSH server: NET: Registered protocol family 10
      362. dropbear.
      363. Starting rpcbind daemon...done.
      364. starting statd: done
      365. Starting automount: done.
      366. Starting HOSTAP Daemon: Configuration file: /etc/hostapd.conf
      367. Could not open configuration file '/etc/hostapd.conf' for reading.
      368. Failed to set up interface with /etc/hostapd.conf
      369. Failed to initialize interface
      370. Starting internet superserver: inetd.
      371. Starting syslogd/klogd: done
      372. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ]
      373. [VID]: VIDEO_SET_STREAMTYPE 0
      374. [VID]: VIDEO_SELECT_SOURCE 1 0
      375. [VID]: VIDEO_PLAY 1 2 0
      376. [VID]: VIDEO_CONTINUE 1 1
      377. [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      378. [VID]: VIDEO_STOP 0 1
      379. [VID]: VIDEO_SELECT_SOURCE 0 0
      380. setenv('prefix', '/usr', 0)
      381. setenv('exec_prefix', '/usr', 0)
      382. setenv('bindir', '/usr/bin', 0)
      383. setenv('sbindir', '/usr/sbin', 0)
      384. setenv('libexecdir', '/usr/lib/enigma2', 0)
      385. setenv('datarootdir', '${prefix}/share', 0)
      386. setenv('datadir', '/usr/share', 0)
      387. setenv('sysconfdir', '/etc', 0)
      388. setenv('sharedstatedir', '/com', 0)
      389. setenv('localstatedir', '/var', 0)
      390. setenv('libdir', '/usr/lib', 0)
      391. setenv('localedir', '${datarootdir}/locale', 0)
      392. setenv('prefix', '/usr', 1)
      393. setenv('exec_prefix', '/usr', 1)
      394. setenv('bindir', '/usr/bin', 1)
      395. setenv('sbindir', '/usr/sbin', 1)
      396. setenv('libexecdir', '/usr/lib/enigma2', 1)
      397. setenv('datarootdir', '/usr/share', 1)
      398. setenv('datadir', '/usr/share', 1)
      399. setenv('sysconfdir', '/etc', 1)
      400. setenv('sharedstatedir', '/com', 1)
      401. setenv('localstatedir', '/var', 1)
      402. setenv('libdir', '/usr/lib', 1)
      403. setenv('localedir', '/usr/share/locale', 1)
      404. resolve: resolve ${datadir}/enigma2/encoding.conf
      405. resolve: -> /usr/share/enigma2/encoding.conf
      406. resolve: resolve ${libdir}/enigma2/python
      407. resolve: -> /usr/lib/enigma2/python
      408. PYTHONPATH: /usr/lib/enigma2/python
      409. + (1) Background File Eraser
      410. + (8) graphics acceleration manager
      411. + (9) GFBDC
      412. 21600k video mem
      413. - double buffering available!
      414. 12960kB available for acceleration surfaces.
      415. resolution: 720 x 576 x 32 (stride: 7680)
      416. + (9) gLCDDC
      417. found OLED display!
      418. lcd buffer 0x6a7d70 4480 bytes, stride 140
      419. + (9) Font Render Class
      420. [FONT] initializing lib...
      421. [FONT] loading fonts...
      422. [FONT] Intializing font cache, using max. 4MB...
      423. + (10) gRC
      424. RC thread created successfully
      425. + (15) eWindowStyleManager
      426. + (20) DVB-CI UI
      427. + (20) Hdmi CEC driver
      428. + (20) UHF Modulator
      429. couldnt open /dev/rfmod0!!!!
      430. + (20) RC Input layer
      431. + (20) misc options
      432. + (20) AVSwitch Driver
      433. + (21) input device driver
      434. [eInputDeviceInit] adding device /dev/input/event0
      435. Input device "dreambox advanced remote control (native)" is not a keyboard.
      436. Found 1 input devices!
      437. + (21) Console RC Driver
      438. failed to open /dev/tty0
      439. + (30) eActionMap
      440. + (35) CI Slots
      441. scanning for common interfaces..
      442. eDVBCIInterfaces->setInputSource(0, 0)
      443. eDVBCIInterfaces->setInputSource(1, 1)
      444. eDVBCIInterfaces->setInputSource(2, 2)
      445. eDVBCIInterfaces->setInputSource(3, 3)
      446. done, found 2 common interface slots
      447. + (40) eServiceCenter
      448. settings instance.
      449. + (41) eServiceFactoryHDMI
      450. + (41) eServiceFactoryM2TS
      451. + (41) eServiceFactoryMP3
      452. + (41) eServiceFactoryFS
      453. + (41) eServiceFactoryDVB
      454. reached rl 70
      455. resolve: resolve ${sysconfdir}/enigma2/lamedb
      456. resolve: -> /etc/enigma2/lamedb
      457. ---- opening lame channel db
      458. can't open /etc/enigma2/lamedb: No such file or directory
      459. scanning for frontends..
      460. found 1 adapter, 0 frontends(0 sim) and 9 demux, boxtype 4
      461. RTC not ready... wait for transponder time
      462. [EPGC] Initialized EPGCache (wait for setCacheFile call now)
      463. resolve: resolve ${datadir}/enigma2/skin_default/pal.png
      464. resolve: -> /usr/share/enigma2/skin_default/pal.png
      465. Loading spinners...
      466. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait1.png
      467. resolve: -> /usr/share/enigma2/skin_default/spinner/wait1.png
      468. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait2.png
      469. resolve: -> /usr/share/enigma2/skin_default/spinner/wait2.png
      470. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait3.png
      471. resolve: -> /usr/share/enigma2/skin_default/spinner/wait3.png
      472. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait4.png
      473. resolve: -> /usr/share/enigma2/skin_default/spinner/wait4.png
      474. resolve: resolve ${datadir}/enigma2/skin_default/spinner/wait5.png
      475. resolve: -> /usr/share/enigma2/skin_default/spinner/wait5.png
      476. found 4 spinner!
      478. executing main
      479. setIoPrio best-effort level 3 ok
      480. resolve: resolve ${libdir}/enigma2/python/mytest.py
      481. resolve: -> /usr/lib/enigma2/python/mytest.py
      482. resolve: resolve ${sysconfdir}/
      483. resolve: -> /etc/
      484. resolve: resolve ${sysconfdir}/
      485. resolve: -> /etc/
      486. resolve: resolve ${datadir}/fonts/
      487. resolve: -> /usr/share/fonts/
      488. resolve: resolve ${sysconfdir}/enigma2/
      489. resolve: -> /etc/enigma2/
      490. resolve: resolve ${libdir}/enigma2/python/Plugins/
      491. resolve: -> /usr/lib/enigma2/python/Plugins/
      492. resolve: resolve ${datadir}/enigma2/po/
      493. resolve: -> /usr/share/enigma2/po/
      494. resolve: resolve ${datadir}/enigma2/
      495. resolve: -> /usr/share/enigma2/
      496. resolve: resolve ${datadir}/enigma2/
      497. resolve: -> /usr/share/enigma2/
      498. resolve: resolve ${sysconfdir}/enigma2/playlist/
      499. resolve: -> /etc/enigma2/playlist/
      500. resolve: resolve ${datadir}/enigma2/defaults/
      501. resolve: -> /usr/share/enigma2/defaults/
      502. resolve: resolve ${datadir}/enigma2/dealer
      503. resolve: -> /usr/share/enigma2/dealer
      504. resolve: resolve ${datadir}/meta
      505. resolve: -> /usr/share/meta
      506. resolve: resolve ${datadir}/enigma2/defaults/
      507. resolve: -> /usr/share/enigma2/defaults/
      508. enumerating block devices...
      509. found block device 'loop0': blacklisted
      510. found block device 'loop1': blacklisted
      511. found block device 'loop2': blacklisted
      512. found block device 'loop3': blacklisted
      513. found block device 'loop4': blacklisted
      514. found block device 'loop5': blacklisted
      515. found block device 'loop6'UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
      516. : blacklisted
      517. found block device 'loop7': blacklisted
      518. found block device 'mtdblock0': blacklisted
      519. found block device 'mtdblock1': blacklisted
      520. found block device 'mtdblock2': blacklisted
      521. found block device 'mtdblock3': blacklisted
      522. found block device 'mtdblock4': blacklisted
      523. menu_mainmenu
      524. enigma2 is the main pvr application... adjust oom score!
      525. resolve: resolve ${datadir}/enigma2/unicable.xml
      526. resolve: -> /usr/share/enigma2/unicable.xml
      527. sec config cleared
      528. sec config completed
      529. Preferred tag editor set to None
      530. resolve: resolve ${datadir}/enigma2/setup.xml
      531. resolve: -> /usr/share/enigma2/setup.xml
      532. resolve: resolve ${sysconfdir}/enigma2/
      533. resolve: -> /etc/enigma2/
      534. loading bouquet... /etc/enigma2/bouquets.tv
      535. resolve: resolve ${sysconfdir}/enigma2/
      536. resolve: -> /etc/enigma2/
      537. loading bouquet... /etc/enigma2/userbouquet.favourites.tv
      538. 171 entries in Bouquet userbouquet.favourites.tv
      539. 1 entries in Bouquet bouquets.tv
      540. resolve: resolve ${sysconfdir}/enigma2/
      541. resolve: -> /etc/enigma2/
      542. loading bouquet... /etc/enigma2/bouquets.radio
      543. resolve: resolve ${sysconfdir}/enigma2/
      544. resolve: -> /etc/enigma2/
      545. loading bouquet... /etc/enigma2/userbouquet.favourites.radio
      546. 0 entries in Bouquet userbouquet.favourites.radio
      547. 1 entries in Bouquet bouquets.radio
      548. [eDVBLocalTimeHandler] enable sync local time with transponder time!
      549. main thread is non-idle! display spinner!
      550. add dreampackage scanner plugin
      551. added
      552. Installing image defaults
      553. Reading .info file /usr/share/enigma2/defaults/Dream/dm8000.info
      554. prerequisites: {u'bcastsystem': ['DVB-S']}
      555. prerequisites: {u'bcastsystem': ['DVB-S']}
      556. prerequisites: {u'bcastsystem': ['DVB-C']}
      557. prerequisites: {u'bcastsystem': ['DVB-T']}
      558. Reading .info file /usr/share/enigma2/defaults/Dream/dm800.info
      559. prerequisites: {u'bcastsystem': ['DVB-S']}
      560. prerequisites: {u'bcastsystem': ['DVB-S']}
      561. prerequisites: {u'bcastsystem': ['DVB-C']}
      562. prerequisites: {u'bcastsystem': ['DVB-T']}
      563. Reading .info file /usr/share/enigma2/defaults/Dream/dm7025.info
      564. prerequisites: {u'bcastsystem': ['DVB-S']}
      565. prerequisites: {u'bcastsystem': ['DVB-S']}
      566. prerequisites: {u'bcastsystem': ['DVB-C']}
      567. prerequisites: {u'bcastsystem': ['DVB-T']}
      568. Reading .info file /usr/share/enigma2/defaults/Dream/dm500hd.info
      569. prerequisites: {u'bcastsystem': ['DVB-S']}
      570. prerequisites: {u'bcastsystem': ['DVB-S']}
      571. prerequisites: {u'bcastsystem': ['DVB-C']}
      572. prerequisites: {u'bcastsystem': ['DVB-T']}
      573. Reading .info file /usr/share/enigma2/defaults/Dream/dm7020hd.info
      574. prerequisites: {u'bcastsystem': ['DVB-S']}
      575. prerequisites: {u'bcastsystem': ['DVB-S']}
      576. prerequisites: {u'bcastsystem': ['DVB-C']}
      577. prerequisites: {u'bcastsystem': ['DVB-T']}
      578. Reading .info file /usr/share/enigma2/defaults/Dream/dm800se.info
      579. prerequisites: {u'bcastsystem': ['DVB-S']}
      580. prerequisites: {u'bcastsystem': ['DVB-S']}
      581. prerequisites: {u'bcastsystem': ['DVB-C']}
      582. prerequisites: {u'bcastsystem': ['DVB-T']}
      583. prerequisites: {u'hardware': ['dm8000']}
      584. prerequisites: {u'hardware': ['dm800']}
      585. prerequisites: {u'hardware': ['dm7025']}
      586. prerequisites: {u'hardware': ['dm500hd']}
      587. prerequisites: {u'hardware': ['dm7020hd']}
      588. prerequisites: {u'hardware': ['dm800se']}
      589. self.packageslist: [({'prerequisites': {u'hardware': ['dm8000']}, 'attributes': {u'config': [{'directory': '/usr/share/enigma2/defaults/Dream/', 'name': 'settings.8000'}], 'filestype': 'directories', 'name': 'Dream Multimedia Default', 'author': 'Dream Multimedia GmbH'}}, '/usr/share/enigma2/defaults/Dream/dm8000.info')]
      590. installing package with index 0 and name Dream Multimedia Default
      591. currentAttributeIndex: 0
      592. installing skin with index 0
      593. currentAttributeIndex: 1
      594. installing config with index 0
      595. merging config: /usr/share/enigma2/defaults/Dream/ - settings.8000
      596. currentAttributeIndex: 1
      597. installing config with index 1
      598. currentAttributeIndex: 2
      599. installing favourites with index 0
      600. currentAttributeIndex: 3
      601. installing package with index 0
      602. currentAttributeIndex: 4
      603. installing services with index 0
      604. end of package reached
      605. set status to DONE
      606. installing done!
      607. [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Display)
      608. - double buffering available!
      609. 10800kB available for acceleration surfaces.
      610. resolution: 1280 x 720 x 32 (stride: 7680)
      611. [FONT] adding font /usr/share/fonts/MyriadPro-Regular.otf...OK (Regular)
      612. [FONT] adding font /usr/share/fonts/MyriadPro-Semibold.otf...OK (Semibold)
      613. [FONT] adding font /usr/share/fonts/MyriadPro-SemiboldIt.otf...OK (Semiboldit)
      614. [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
      615. [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
      616. [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
      617. [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Subtitlefont)
      618. [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (VFD)
      619. [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
      620. cannot open /proc/stb/avs/0/input_choices
      621. --> setting scaler_sharpness to: 0000000D
      622. couldn't open /proc/stb/misc/12V_output
      623. resolve: resolve ${datadir}/enigma2/keymap.xml
      624. resolve: -> /usr/share/enigma2/keymap.xml
      625. [ePopen] command: ip -o addr show dev wlan0
      626. [ePopen] command: ip -o addr show dev eth0
      627. setLCDBrightness 25
      628. setLCDBrightness 127
      629. resolve: resolve ${datadir}/keymaps/
      630. resolve: -> /usr/share/keymaps/
      631. resolve: resolve ${datadir}/keymaps/
      632. resolve: -> /usr/share/keymaps/
      633. resolve: resolve ${datadir}/keymaps/
      634. resolve: -> /usr/share/keymaps/
      635. Activating keymap: Keyboard English
      636. resolve: resolve ${datadir}/keymaps/
      637. resolve: -> /usr/share/keymaps/
      638. [ePopen] command: loadkmap < /usr/share/keymaps/eng.kmap
      639. Activating language English
      640. language set to en_EN
      641. FIXME: request for unknown slot
      642. FIXME: request for unknown slot
      643. [XBMC] Desktop size [1280x720]
      644. [LCD4linux] libusb found :-)
      645. [RemoteChannelStreamConverter] fallback to default translation for Remote channel stream converter
      646. [RemoteChannelStreamConverter] fallback to default translation for Convert remote channel list for streaming
      647. main thread is non-idle! display spinner!
      648. resolve: resolve ${datadir}/enigma2/setup.xml
      649. resolve: -> /usr/share/enigma2/setup.xml
      650. resolve: resolve ${libdir}
      651. resolve: -> /usr/lib
      652. Restarting internet superserver: inetd .
      653. <ZappingModeSelection> set zapping mode : mute
      654. [UIPositionSetup] write dst_left : 0
      655. [UIPositionSetup] write dst_width : 720
      656. [UIPositionSetup] write dst_top : 0
      657. [UIPositionSetup] write dst_height : 576
      658. [AutoShutDown] set language to en
      659. [AutoShutDown] set language to en
      660. [AutoShutDown] fallback to default Enigma2 Translation for Idle Server Mode
      661. [AutoShutDown] fallback to default Enigma2 Translation for Standby
      662. [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
      663. [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown
      664. [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
      665. [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown
      666. [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
      667. [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown
      668. <RemoteControlCode> Write Remote Control Code : 2
      669. remove DVI-PC because it does not exist.
      670. set HDMI Colorspace : Edid(Auto)
      671. hotplug on DVI
      672. set Videomode YPbPr 720p 50Hz
      673. set aspect, policy, policy2, wss 16:9 panscan letterbox auto
      674. resolve: resolve ${datadir}/enigma2/
      675. resolve: -> /usr/share/enigma2/
      676. It's now Thu Jan 1 01:00:36 1970
      677. [timer.py] next activation: 136 (in 99803 ms)
      678. timers.xml not found!
      679. It's now Thu Jan 1 01:00:36 1970
      680. [timer.py] next activation: 136 (in 99281 ms)
      681. hbbtv.app: no process found
      682. [browser] browser start
      683. Looking for embedded skin
      684. allocating new converter!
      685. allocating new converter!
      686. allocating new converter!
      687. allocating new converter!
      688. allocating new converter!
      689. allocating new converter!
      690. allocating new converter!
      691. allocating new converter!
      692. allocating new converter!
      693. [LCD4linux] Skin ['VBMain_summary', 'SimpleSummary']
      694. [LCD4linux] Skin VBMain
      695. [LCD4linux Support] set LCD4linux for DUO2 (ver V0.8r3)
      696. [LCD4linux] create Link
      697. [LCD4linux] get Samsung Device
      698. [AutoShutDown] start....
      699. [CrashReport] auto submit
      700. [CrashReport] no crash-log
      701. [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
      702. Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml']
      703. getStepWithID: start
      704. result: nothing
      705. ('en_EN', ('English', 'en', 'EN'))
      706. allocating new converter!
      707. warning, skin is missing element wizard in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
      708. warning, skin is missing element step in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
      709. warning, skin is missing element stepslider in <class 'Plugins.SystemPlugins.Videomode.VideoWizard.VideoWizard'>
      710. allocating new converter!
      711. [LCD4linux] Skin WizardSummary
      712. Updating values in step 1
      713. set LCD text
      714. wizard step: {'code': u'self.clearSelectedKeys()\nself.selectKey("OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV or select a different input port.\n\nThe next input port will be automatically probed in 20 seconds', 'displaytext': 'Select video port', 'id': 'portselection', 'condition': '', 'listevaluation': u'portSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'c[AUD]: AUDIO_SET_MUTE 0
      715. ode_async': '', [AUD]: AUDIO_SET_MIXER -837165584
      716. 'codeafter_async[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      717. ': '', 'timeouts[AUD]: AUDIO_SET_MIXER : next left volume 0, right volume 0
      718. tep': '', 'list'[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      719. : [], 'onselect'[AUD]: AUDIO_SET_MIXER -837165584
      720. : u'portSelectio[AUD]: AUDIO_SET_MIXER : amixl 0, amixr 0
      721. nMoved', 'dynami[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      722. clist': u'portLi[AUD]: AUDIO_SET_MIXER : next left volume -70, right volume -70
      723. st', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
      724. wizard text Video input selection
      726. Please press OK if you can see this page on your TV or select a different input port.
      728. The next input port will be automatically probed in 20 seconds
      729. set LCD text
      730. code self.clearSelectedKeys()
      731. self.selectKey("OK")
      732. selectPic: arrowup
      733. showing list, 1
      734. self.list: <Components.Sources.List.List object at 0x5ff494f0>
      735. self.list: <Components.Sources.List.List object at 0x5ff494f0>
      736. setZPosition
      737. dynamic list, calling portList
      738. self.selection: DVI
      739. current mode not available. couldn't set videomode
      740. self.selection: DVI
      741. current mode not available. couldn't set videomode
      742. self.selection: DVI
      743. current mode not available. couldn't set videomode
      744. showing config
      745. setPixmapNum(0) failed! defined pixmaps: []
      746. [LCD4linux] Skin VideoWizard
      747. setValue 100
      748. Setvolume: 100 100 (raw)
      749. Setvolume: 0 0 (-1db)
      750. Setvolume: 100 100 (raw)
      751. Setvolume: 0 0 (-1db)
      752. child has terminated
      753. pipes closed
      754. child has terminated
      755. pipes closed
      756. [ePopen] command: route -n | grep wlan0
      757. child has terminated
      758. pipes closed
      759. [ePopen] command: route -n | grep eth0
      760. poll: unhandled POLLERR/HUP/NVAL for fd 66(16)
      761. poll: unhandled POLLERR/HUP/NVAL for fd 69(16)
      762. poll: unhandled POLLERR/HUP/NVAL for fd 71(17)
      763. child has terminated
      764. pipes closed
      765. child has terminated
      766. pipes closed
      767. nameservers: []
      768. read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
      769. self.ifaces after loading: {'wlan0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': False, 'dns-nameservers': False, 'mac': '00:00:00:00:00:00', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}, 'eth0': {'preup': False, 'predown': False, 'ip': [0, 0, 0, 0], 'up': True, 'dns-nameservers': False, 'mac': '00:1d:ec:06:b1:e5', 'dhcp': True, 'netmask': [0, 0, 0, 0], 'gateway': [0, 0, 0, 0]}}
      770. AT plugin not found
      771. SerienRecorder plugin not found
      772. ER plugin not found
      773. resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
      774. resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface/plugin.py
      775. resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/WebInterface
      776. resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
      777. resolve: resolve ${libdir}/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
      778. resolve: -> /usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/pluginshook.src
      779. [OpenWebif] no plugins to load
      780. [OpenWebif] started on 80
      781. poll: unhandled POLLERR/HUP/NVAL for fd 69(16)
      782. timeoutCounter: 19
      783. unknown client
      784. unknown client
      785. timeoutCounter: 18
      786. timeoutCounter: 17
      787. timeoutCounter: 16
      788. [LCD4linux] update
      789. [LCD4linux] Data-Build
      790. timeoutCounter: 15
      791. timeoutCounter: 14
      792. timeoutCounter: 13
      793. timeoutCounter: 12
      794. timeoutCounter: 11
      795. [LCD4linux] update
      796. timeoutCounter: 10
      797. timeoutCounter: 9
      798. timeoutCounter: 8
      799. timeoutCounter: 7
      800. timeoutCounter: 6
      801. [LCD4linux] update
      802. timeoutCounter: 5
      803. timeoutCounter: 4
      804. timeoutCounter: 3
      805. timeoutCounter: 2
      806. timeoutCounter: 1
      807. [LCD4linux] update
      808. timeoutCounter: 0
      809. selection next item
      810. self.selection: Scart
      811. current mode not available. couldn't set videomode
      812. self.selection: Scart
      813. current mode not available. couldn't set videomode
      814. self.selection: Scart
      815. current mode not available. couldn't set videomode
      816. current: ('Scart', 'Scart')
      817. current mode not available. couldn't set videomode
      818. down
      819. timeoutCounter: 19
      820. timeoutCounter: 18
      821. timeoutCounter: 17
      822. timeoutCounter: 16
      823. [LCD4linux] update
      824. [LCD4linux] Data-Build
      825. timeoutCounter: 15
      826. timeoutCounter: 14
      827. timeoutCounter: 13
      828. timeoutCounter: 12
      829. timeoutCounter: 11
      830. [LCD4linux] update
      831. timeoutCounter: 10
      832. timeoutCounter: 9
      833. timeoutCounter: 8
      834. timeoutCounter: 7
      835. timeoutCounter: 6
      836. [LCD4linux] update
      837. timeoutCounter: 5
      838. timeoutCounter: 4
      839. timeoutCounter: 3
      840. timeoutCounter: 2
      841. timeoutCounter: 1
      842. [LCD4linux] update
      843. timeoutCounter: 0
      844. selection next item
      845. self.selection: YPbPr
      846. current mode not available. couldn't set videomode
      847. self.selection: YPbPr
      848. current mode not available. couldn't set videomode
      849. self.selection: YPbPr
      850. current mode not available. couldn't set videomode
      851. current: ('YPbPr', 'YPbPr')
      852. current mode not available. couldn't set videomode
      853. down
      854. timeoutCounter: 19
      855. timeoutCounter: 18
      856. timeoutCounter: 17
      857. timeoutCounter: 16
      858. [LCD4linux] update
      859. timeoutCounter: 15
      860. timeoutCounter: 14
      861. timeoutCounter: 13
      862. timeoutCounter: 12
      863. timeoutCounter: 11
      864. [LCD4linux] update
      865. timeoutCounter: 10
      866. timeoutCounter: 9
      867. timeoutCounter: 8
      868. timeoutCounter: 7
      869. timeoutCounter: 6
      870. [LCD4linux] update
      871. timeoutCounter: 5
      872. timeoutCounter: 4
      873. timeoutCounter: 3
      874. timeoutCounter: 2
      875. timeoutCounter: 1
      876. [LCD4linux] update
      877. timeoutCounter: 0
      878. selection next item
      879. self.selection: DVI
      880. current mode not available. couldn't set videomode
      881. self.selection: DVI
      882. current mode not available. couldn't set videomode
      883. self.selection: DVI
      884. current mode not available. couldn't set videomode
      885. current: ('HDMI', 'DVI')
      886. current mode not available. couldn't set videomode
      887. down
      888. timeoutCounter: 19
      889. timeoutCounter: 18
      890. timeoutCounter: 17
      891. timeoutCounter: 16
      892. [LCD4linux] update
      893. timeoutCounter: 15
      894. timeoutCounter: 14
      895. timeoutCounter: 13
      896. timeoutCounter: 12
      897. timeoutCounter: 11
      898. [LCD4linux] update
      899. timeoutCounter: 10
      900. timeoutCounter: 9
      901. timeoutCounter: 8
      902. timeoutCounter: 7
      903. timeoutCounter: 6
      904. [LCD4linux] update
      905. timeoutCounter: 5
      906. timeoutCounter: 4
      907. timeoutCounter: 3
      908. timeoutCounter: 2
      909. timeoutCounter: 1
      910. [LCD4linux] update
      911. timeoutCounter: 0
      912. selection next item
      913. self.selection: Scart
      914. current mode not available. couldn't set videomode
      915. self.selection: Scart
      916. current mode not available. couldn't set videomode
      917. self.selection: Scart
      918. current mode not available. couldn't set videomode
      919. current: ('Scart', 'Scart')
      920. current mode not available. couldn't set videomode
      921. down
      922. timeoutCounter: 19
      923. timeoutCounter: 18
      924. timeoutCounter: 17
      925. timeoutCounter: 16
      926. [LCD4linux] update
      927. [LCD4linux] Data-Build
      928. timeoutCounter: 15
      929. timeoutCounter: 14
      930. timeoutCounter: 13
      931. timeoutCounter: 12
      932. timeoutCounter: 11
      933. [LCD4linux] update
      934. timeoutCounter: 10
      935. timeoutCounter: 9
      936. timeoutCounter: 8
      937. timeoutCounter: 7
      938. timeoutCounter: 6
      939. [LCD4linux] update
      940. timeoutCounter: 5
      941. timeoutCounter: 4
      942. timeoutCounter: 3
      943. timeoutCounter: 2
      944. It's now Thu Jan 1 01:02:16 1970
      945. [timer.py] next activation: 236 (in 99999 ms)
      946. It's now Thu Jan 1 01:02:16 1970
      947. [timer.py] next activation: 236 (in 99998 ms)
      948. timeoutCounter: 1
      949. [LCD4linux] update
      950. timeoutCounter: 0
      951. selection next item
      952. self.selection: YPbPr
      953. current mode not available. couldn't set videomode
      954. self.selection: YPbPr
      955. current mode not available. couldn't set videomode
      956. self.selection: YPbPr
      957. current mode not available. couldn't set videomode
      958. current: ('YPbPr', 'YPbPr')
      959. current mode not available. couldn't set videomode
      960. down
      961. timeoutCounter: 19
      962. timeoutCounter: 18
      963. timeoutCounter: 17
      964. timeoutCounter: 16
      965. [LCD4linux] update
      966. timeoutCounter: 15
      967. timeoutCounter: 14
      968. timeoutCounter: 13
      969. timeoutCounter: 12
      970. timeoutCounter: 11
      971. [LCD4linux] update
      972. timeoutCounter: 10
      973. timeoutCounter: 9
      974. timeoutCounter: 8
      975. timeoutCounter: 7
      976. timeoutCounter: 6
      977. [LCD4linux] update
      978. timeoutCounter: 5
      979. timeoutCounter: 4
      980. timeoutCounter: 3
      981. timeoutCounter: 2
      982. timeoutCounter: 1
      983. [LCD4linux] update
      984. timeoutCounter: 0
      985. selection next item
      986. self.selection: DVI
      987. current mode not available. couldn't set videomode
      988. self.selection: DVI
      989. current mode not available. couldn't set videomode
      990. self.selection: DVI
      991. current mode not available. couldn't set videomode
      992. current: ('HDMI', 'DVI')
      993. current mode not available. couldn't set videomode
      994. down
      995. timeoutCounter: 19
      996. timeoutCounter: 18
      997. timeoutCounter: 17
      998. timeoutCounter: 16
      999. [LCD4linux] update
      1000. timeoutCounter: 15
      1001. timeoutCounter: 14
      1002. timeoutCounter: 13
      1003. timeoutCounter: 12
      1004. timeoutCounter: 11
      1005. [LCD4linux] update
      1006. timeoutCounter: 10
      1007. timeoutCounter: 9
      1008. timeoutCounter: 8
      1009. timeoutCounter: 7
      1010. timeoutCounter: 6
      1011. [LCD4linux] update
      1012. timeoutCounter: 5
      1013. bcmgenet bcmgenet.0 eth0: link down
      1014. timeoutCounter: 4
      1015. timeoutCounter: 3
      1016. timeoutCounter: 2
      1017. bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
      1018. timeoutCounter: 1
      1019. [LCD4linux] update
      1020. timeoutCounter: 0
      1021. selection next item
      1022. self.selection: Scart
      1023. current mode not available. couldn't set videomode
      1024. self.selection: Scart
      1025. current mode not available. couldn't set videomode
      1026. self.selection: Scart
      1027. current mode not available. couldn't set videomode
      1028. current: ('Scart', 'Scart')
      1029. current mode not available. couldn't set videomode
      1030. down
      1031. timeoutCounter: 19
      1032. timeoutCounter: 18
      1033. timeoutCounter: 17
      1034. timeoutCounter: 16
      1035. [LCD4linux] update
      1036. [LCD4linux] Data-Build
      1037. timeoutCounter: 15
      1038. timeoutCounter: 14
      1039. timeoutCounter: 13
      1040. timeoutCounter: 12
      1041. timeoutCounter: 11
      1042. [LCD4linux] update
      1043. timeoutCounter: 10
      1044. timeoutCounter: 9
      1045. timeoutCounter: 8
      1046. timeoutCounter: 7
      1047. timeoutCounter: 6
      1048. [LCD4linux] update
      1049. timeoutCounter: 5
      1050. timeoutCounter: 4
      1051. timeoutCounter: 3
      1052. timeoutCounter: 2
      1053. bcmgenet bcmgenet.0 eth0: link down
      1054. timeoutCounter: 1
      1055. [LCD4
      Alles anzeigen

    • Hallo,
      ich kenn mich mit dem Inhalt nicht so richtig aus.
      Aber dass das deutlich länger ist als bei mir und das ist wirklich frisch geflasht ohne Zurückspielung von Einstellungen etc. ?
      Etwas seltsam kommt mir die Gegend um Zeile 553 vor:

      Reading .info file /usr/share/enigma2/defaults/Dream/dm8000.info

      das passt doch gar nicht da rein ?

      Grüsse

    • dg4sj schrieb:

      Aber dass das deutlich länger ist als bei mir und das ist wirklich frisch geflasht ohne Zurückspielung von Einstellungen etc. ?
      Ja, ich habe nur das orig. VU+Duo² 3.0 Image geflasht, mehr nicht.

      dg4sj schrieb:

      Reading .info file /usr/share/enigma2/defaults/Dream/dm8000.info
      Ich kenn mich mit den einzelen Log Inhalten nicht wirklich aus. Vielleicht kann einer dazu was sagen der sich da besser auskennt.

      Banana Joe schrieb:

      Diese Zeile taucht zweimal auf. Das sieht nicht richtig aus. Wackelkontakt?
      Gute Frage. Die LAN-Buchse hinten am Receiver hab ich jetzt überprüft und das Kabel was drin ist vorne direkt an der Buchse angefasst und vorsichtig hin und her bewegt. Der Stecker vom Kabel selbst hat minimalen Spielraum. Aber die Buchse selbst lässt sich nur mit sanfter Gewalt nach hinten ziehen. Ich würde sagen das sieht von außen ganz normal aus. Von innen ist auch alles fest.

    • Könnte das denn Ursache für mein Problem sein?

      Nur nebenbei mal erwähnt. Ich hab noch eine alte DM800se gefunden. Die habe ich mal direkt an der Fritte angeschlossen. DHCP eingeschaltet. IP 192.168.178.4. Läuft wunderbar.
      Also für mich ist der Fehler definitiv an der Duo². Nur bräuchte ich hier mal Hilfe für eine genaue Ursache.

    • Banana Joe schrieb:

      Der dhcp Server antwortet nicht.
      Dazu gäbe es v. TE aber noch das Problerm (separater Thread) mit seinen Netzwerk (SubNet)

      Cilow schrieb:

      Die habe ich mal direkt an der Fritte angeschlossen.
      Die Duo² hängt auch wie die DM 800 direkt an der Fritte, oder nach wie vor am Asus?
      Nach diesen Log funktioniert die Powertaste an der Box & die Fernbedienung?
      Wie ich schon mal erwähnt habe, einmal diese Baustelle (Power-Taste & Fernbed.) dann unmittelbar
      die Andere (Netzwerk) ohne entsprechende Rückmeldungen wird es schwierig werden
      hier ein Ziel zu erreichen. Ist ja Fernwartung hier & wir sind alles "blinde Hühner". :)

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von Radar ()