VuDuo2 hängt manchmal beim Start

    • VuDuo2 hängt manchmal beim Start

      Neu

      Hallo,

      meine VuDuo2 mit dem stets aktuellen VTI-Image hängt beim Start ab und zu im Bootscreen fest.
      Das Netzwerk läuft, ich kann per Telnet auf die Box. Ein Crashlog kann ich weder in /media noch in /media/hdd finden.

      Hier mal der Inhalt von /var/log/messages, gibt das vielleicht einen Hinweis woran es liegt?
      Wenn ich die Box neu starte, läuft sie meist anstandslos. Bis sie dann per Zufall wieder beim Start hängt.
      Spoiler anzeigen
      Aug 11 11:08:53 vuduo2 syslog.info syslogd started: BusyBox v1.23.2
      Aug 11 11:08:53 vuduo2 user.warn kernel: bounce pool size: 64 pages
      Aug 11 11:08:53 vuduo2 user.notice kernel: NFS: Registering the id_resolver key type
      Aug 11 11:08:53 vuduo2 user.notice kernel: Key type id_resolver registered
      Aug 11 11:08:53 vuduo2 user.notice kernel: Key type id_legacy registered
      Aug 11 11:08:53 vuduo2 user.info kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
      Aug 11 11:08:53 vuduo2 user.info kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
      Aug 11 11:08:53 vuduo2 user.info kernel: msgmni has been set to 846
      Aug 11 11:08:53 vuduo2 user.info kernel: io scheduler noop registered
      Aug 11 11:08:53 vuduo2 user.info kernel: io scheduler cfq registered (default)
      Aug 11 11:08:53 vuduo2 user.info kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
      Aug 11 11:08:53 vuduo2 user.info kernel: serial8250.0: ttyS0 at MMIO 0x10406b00 (irq = 62, base_baud = 5062500) is a 16550A
      Aug 11 11:08:53 vuduo2 user.info kernel: console [ttyS0] enabled
      Aug 11 11:08:53 vuduo2 user.info kernel: bootconsole [early0] disabled
      Aug 11 11:08:53 vuduo2 user.info kernel: serial8250.0: ttyS1 at MMIO 0x10406b40 (irq = 63, base_baud = 5062500) is a 16550A
      Aug 11 11:08:53 vuduo2 user.info kernel: serial8250.0: ttyS2 at MMIO 0x10406b80 (irq = 64, base_baud = 5062500) is a 16550A
      Aug 11 11:08:53 vuduo2 user.info kernel: loop: module loaded
      Aug 11 11:08:53 vuduo2 user.err kernel: ahci strict-ahci.0: can't get clock
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_enable: sata [1]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm40nm_pm_sata_enable 00
      Aug 11 11:08:53 vuduo2 user.info kernel: ahci strict-ahci.0: SSS flag set, parallel bus scan disabled
      Aug 11 11:08:53 vuduo2 user.info kernel: ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
      Aug 11 11:08:53 vuduo2 user.info kernel: ahci strict-ahci.0: flags: ncq sntf stag clo slum part
      Aug 11 11:08:53 vuduo2 user.info kernel: scsi0 : ahci_platform
      Aug 11 11:08:53 vuduo2 user.info kernel: scsi1 : ahci_platform
      Aug 11 11:08:53 vuduo2 user.notice kernel: ata1: FORCE: PHY spd limit set to 1.5Gbps
      Aug 11 11:08:53 vuduo2 user.info kernel: ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 42
      Aug 11 11:08:53 vuduo2 user.info kernel: ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 42
      Aug 11 11:08:53 vuduo2 user.info kernel: brcmstb_nand: NAND controller driver is loaded
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_enable: network [1]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm7425_pm_network_enable 00
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_enable: enet [1]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm40nm_pm_genet_enable 00
      Aug 11 11:08:53 vuduo2 user.crit kernel: Found PHY at Address 3
      Aug 11 11:08:53 vuduo2 user.info kernel: bcmgenet: configuring instance #0 for external RGMII
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_disable: enet [0]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm40nm_pm_genet_disable 00
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_disable: network [0]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm7425_pm_network_disable 00
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
      Aug 11 11:08:53 vuduo2 user.info kernel: ata1: SATA link down (SStatus 0 SControl 310)
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_enable: usb [1]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm40nm_pm_usb_enable 00
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: Broadcom STB EHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: irq 66, io mem 0x10480300
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 1-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 1-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: Broadcom STB EHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: irq 67, io mem 0x10480500
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 2-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 2-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: Broadcom STB EHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: irq 71, io mem 0x10490300
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 3-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 3-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: Broadcom STB EHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: irq 72, io mem 0x10490500
      Aug 11 11:08:53 vuduo2 user.info kernel: ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 4-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 4-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.0: Broadcom STB OHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.0: irq 68, io mem 0x10480400
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 5-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 5-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.1: Broadcom STB OHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.1: irq 69, io mem 0x10480600
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 6-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 6-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.2: Broadcom STB OHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.2: irq 73, io mem 0x10490400
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 7-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 7-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.3: Broadcom STB OHCI
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
      Aug 11 11:08:53 vuduo2 user.info kernel: ohci-brcm ohci-brcm.3: irq 74, io mem 0x10490600
      Aug 11 11:08:53 vuduo2 user.info kernel: usb 4-1: new high-speed USB device number 2 using ehci-brcm
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 8-0:1.0: USB hub found
      Aug 11 11:08:53 vuduo2 user.info kernel: hub 8-0:1.0: 1 port detected
      Aug 11 11:08:53 vuduo2 user.info kernel: usbcore: registered new interface driver usb-storage
      Aug 11 11:08:53 vuduo2 user.info kernel: mousedev: PS/2 mouse device common for all mice
      Aug 11 11:08:53 vuduo2 user.info kernel: i2c /dev entries driver
      Aug 11 11:08:53 vuduo2 user.info kernel: IR NEC protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR RC5(x) protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR RC6 protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR JVC protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR Sony protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR RC5 (streamzap) protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR SANYO protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: IR MCE Keyboard/mouse protocol handler initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: gspca_main: v2.14.0 registered
      Aug 11 11:08:53 vuduo2 user.info kernel: sdhci: Secure Digital Host Controller Interface driver
      Aug 11 11:08:53 vuduo2 user.info kernel: sdhci: Copyright(c) Pierre Ossman
      Aug 11 11:08:53 vuduo2 user.info kernel: sdhci-pltfm: SDHCI platform and OF driver helper
      Aug 11 11:08:53 vuduo2 user.info kernel: hidraw: raw HID events driver (C) Jiri Kosina
      Aug 11 11:08:53 vuduo2 user.info kernel: usbcore: registered new interface driver usbhid
      Aug 11 11:08:53 vuduo2 user.info kernel: usbhid: USB HID core driver
      Aug 11 11:08:53 vuduo2 user.info kernel: TCP: cubic registered
      Aug 11 11:08:53 vuduo2 user.info kernel: NET: Registered protocol family 17
      Aug 11 11:08:53 vuduo2 user.notice kernel: Key type dns_resolver registered
      Aug 11 11:08:53 vuduo2 user.info kernel: PM: CP0 COUNT/COMPARE frequency does not depend on divisor
      Aug 11 11:08:53 vuduo2 user.info kernel: EBI CS0: setting up NAND flash (primary)
      Aug 11 11:08:53 vuduo2 user.info kernel: NAND device: Manufacturer ID: 0xec, Chip ID: 0xd3 (Samsung NAND 1GiB 3,3V 8-bit)
      Aug 11 11:08:53 vuduo2 user.info kernel: NAND device: 1024MiB, SLC, page size: 2048, OOB size: 64
      Aug 11 11:08:53 vuduo2 user.info kernel: brcmnand brcmnand.0: 1024MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Hamming ECC
      Aug 11 11:08:53 vuduo2 user.info kernel: Bad block table found at page 524224, version 0x01
      Aug 11 11:08:53 vuduo2 user.info kernel: Bad block table found at page 524160, version 0x01
      Aug 11 11:08:53 vuduo2 user.notice kernel: Creating 4 MTD partitions on "brcmnand.0":
      Aug 11 11:08:53 vuduo2 user.notice kernel: 0x000002700000-0x000040000000 : "rootfs"
      Aug 11 11:08:53 vuduo2 user.notice kernel: 0x000002700000-0x000040000000 : "rootfs(redundant)"
      Aug 11 11:08:53 vuduo2 user.notice kernel: 0x000000200000-0x000000900000 : "kernel"
      Aug 11 11:08:53 vuduo2 user.notice kernel: 0x000000900000-0x000000b00000 : "mac"
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: attaching mtd0 to ubi0
      Aug 11 11:08:53 vuduo2 user.notice kernel: random: nonblocking pool is initialized
      Aug 11 11:08:53 vuduo2 user.info kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
      Aug 11 11:08:53 vuduo2 user.info kernel: ata2.00: ATA-8: WDC WD10EADS-00L5B1, 01.01A01, max UDMA/133
      Aug 11 11:08:53 vuduo2 user.info kernel: ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
      Aug 11 11:08:53 vuduo2 user.info kernel: ata2.00: configured for UDMA/133
      Aug 11 11:08:53 vuduo2 user.notice kernel: scsi 1:0:0:0: Direct-Access ATA WDC WD10EADS-00L 01.0 PQ: 0 ANSI: 5
      Aug 11 11:08:53 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
      Aug 11 11:08:53 vuduo2 user.notice kernel: sd 1:0:0:0: Attached scsi generic sg0 type 0
      Aug 11 11:08:53 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] Write Protect is off
      Aug 11 11:08:53 vuduo2 user.debug kernel: sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
      Aug 11 11:08:53 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
      Aug 11 11:08:53 vuduo2 user.info kernel: sda: sda1
      Aug 11 11:08:53 vuduo2 user.notice kernel: sd 1:0:0:0: [sda] Attached SCSI disk
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: scanning is finished
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: attached mtd0 (name "rootfs", size 985 MiB) to ubi0
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: good PEBs: 7876, bad PEBs: 4, corrupted PEBs: 0
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: max/mean erase counter: 21/11, WL threshold: 4096, image sequence number: 576582757
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: available PEBs: 0, total reserved PEBs: 7876, PEBs reserved for bad PEB handling: 156
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBI: background thread "ubi_bgt0d" started, PID 53
      Aug 11 11:08:53 vuduo2 user.info kernel: ALSA device list:
      Aug 11 11:08:53 vuduo2 user.info kernel: No soundcards found.
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: parse sync
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: background thread "ubifs_bgt0_0" started, PID 56
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: mounted UBI device 0, volume 0, name "rootfs"
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: FS size: 978350080 bytes (933 MiB, 7705 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: reserved for root: 0 bytes (0 KiB)
      Aug 11 11:08:53 vuduo2 user.notice kernel: UBIFS: media format: w4/r0 (latest is w4/r0), UUID 97F15F55-E523-4125-AD74-F023F8547CFF, small LPT model
      Aug 11 11:08:53 vuduo2 user.info kernel: VFS: Mounted root (ubifs filesystem) on device 0:12.
      Aug 11 11:08:53 vuduo2 user.info kernel: devtmpfs: mounted
      Aug 11 11:08:53 vuduo2 user.info kernel: Freeing unused kernel memory: 244K (80783000 - 807c0000)
      Aug 11 11:08:53 vuduo2 daemon.info kernel: udevd[74]: starting version 182
      Aug 11 11:08:53 vuduo2 user.err kernel: UBI error: ubi_open_volume: cannot open device 0, volume 0, error -16
      Aug 11 11:08:53 vuduo2 user.warn kernel: rtusb init rt2870 --->
      Aug 11 11:08:53 vuduo2 user.warn kernel: === pAd = e0338000, size = 511128 ===
      Aug 11 11:08:53 vuduo2 user.warn kernel: <-- RTMPAllocTxRxRingMemory, Status=0
      Aug 11 11:08:53 vuduo2 user.warn kernel: <-- RTMPAllocAdapterBlock, Status=0
      Aug 11 11:08:53 vuduo2 user.info kernel: usbcore: registered new interface driver rt2870
      Aug 11 11:08:53 vuduo2 user.info kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
      Aug 11 11:08:53 vuduo2 user.warn kernel: procmk_init
      Aug 11 11:08:53 vuduo2 user.warn kernel: bcm_event: module license 'Proprietary' taints kernel.
      Aug 11 11:08:53 vuduo2 user.warn kernel: Disabling lock debugging due to kernel taint
      Aug 11 11:08:53 vuduo2 user.info kernel: DVB: registering new adapter (_vuplus_duo2_)
      Aug 11 11:08:53 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Aug 11 11:08:53 vuduo2 user.warn kernel: Hotplug - status.connected 1:0:0
      Aug 11 11:08:53 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Aug 11 11:08:53 vuduo2 user.warn kernel: Hotplug - connecting HDMI to display 0xe
      Aug 11 11:08:53 vuduo2 user.warn kernel: [GPIO]Default
      Aug 11 11:08:53 vuduo2 user.warn kernel: [GP]:brcm_pwm_init
      Aug 11 11:08:53 vuduo2 user.warn kernel: bcm7424: hotplug_callback():
      Aug 11 11:08:53 vuduo2 user.warn kernel: Hotplug - status.connected 1:1:2
      Aug 11 11:08:53 vuduo2 user.info kernel: brcm_demux_init: $Id: bcm_demux.c,v 0.7 $
      Aug 11 11:08:53 vuduo2 user.warn kernel: [MPVR]: >> misc_pvr_init
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: ^A6bcm7335_video_init
      Aug 11 11:08:53 vuduo2 user.warn kernel: BKNI_P_GetTrackAllocEntry_resize: resizing from 5376->8704
      Aug 11 11:08:53 vuduo2 user.warn kernel: BKNI_Malloc(linuxkernel) top users:
      Aug 11 11:08:53 vuduo2 user.warn kernel: blocks, bytes, filename:line
      Aug 11 11:08:53 vuduo2 user.warn kernel: 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
      Aug 11 11:08:53 vuduo2 user.warn kernel: 398, 28656, magnum/commonutils/mrc/src/bmrc_monitor.c:666
      Aug 11 11:08:53 vuduo2 user.warn kernel: [AUD]: ^A6bcm7335_audio_init
      Aug 11 11:08:53 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Aug 11 11:08:53 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Aug 11 11:08:53 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Aug 11 11:08:53 vuduo2 user.info kernel: BRCM brcm_dvb0: DVB: registering adapter 0 frontend 0 (Vuplus FE)...
      Aug 11 11:08:53 vuduo2 user.warn kernel: bcm7424: bcm7335_frontend_init(): vtuner1 : 5
      Aug 11 11:08:53 vuduo2 user.warn kernel: KSEG1 : 0x80000000
      Aug 11 11:08:53 vuduo2 user.warn kernel: lcr 0x3
      Aug 11 11:08:53 vuduo2 user.warn kernel: irq : 63 ret : 0
      Aug 11 11:08:53 vuduo2 user.info kernel: input: dreambox advanced remote control (native) as /devices/virtual/input/input0
      Aug 11 11:08:53 vuduo2 user.warn kernel: Resistor Div: 0x0
      Aug 11 11:08:53 vuduo2 user.warn kernel: Duo2 LCD initialized 0
      Aug 11 11:08:53 vuduo2 user.info kernel: [LCD]: registered
      Aug 11 11:08:53 vuduo2 user.info kernel: [CI]: registered ci0 249
      Aug 11 11:08:53 vuduo2 user.info kernel: [CI]: registered ci1 248
      Aug 11 11:08:53 vuduo2 user.info kernel: [CI]: CI interface initialised
      Aug 11 11:08:53 vuduo2 user.info kernel: [DFP]: registered dbox fp
      Aug 11 11:08:53 vuduo2 user.info kernel: [DFP]: Scart 9597 is found 0
      Aug 11 11:08:53 vuduo2 user.info kernel: [SC]: registered sci0
      Aug 11 11:08:53 vuduo2 user.info kernel: [SC]: registered sci1
      Aug 11 11:08:53 vuduo2 user.warn kernel: system_time_set wakeup mode get
      Aug 11 11:08:53 vuduo2 user.warn kernel: system_time_set wakeup mode get 0xc2
      Aug 11 11:08:53 vuduo2 user.warn kernel: FP Update Driver Loaded
      Aug 11 11:08:53 vuduo2 user.warn kernel: VFDController Update Driver Loaded
      Aug 11 11:08:53 vuduo2 user.warn kernel: BKNI_P_GetTrackAllocEntry_resize: resizing from 8704->14080
      Aug 11 11:08:53 vuduo2 user.warn kernel: BKNI_Malloc(linuxkernel) top users:
      Aug 11 11:08:53 vuduo2 user.warn kernel: blocks, bytes, filename:line
      Aug 11 11:08:53 vuduo2 user.warn kernel: 1622, 358960, BSEAV/lib/utils/balloc.c:31
      Aug 11 11:08:53 vuduo2 user.warn kernel: 1024, 176128, portinginterface/hsm/src/common/bhsm.c:500
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_STOP 0 1
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_enable: network [1]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm7425_pm_network_enable 00
      Aug 11 11:08:53 vuduo2 user.debug kernel: __clk_enable: enet [1]
      Aug 11 11:08:53 vuduo2 user.debug kernel: bcm40nm_pm_genet_enable 00
      Aug 11 11:08:53 vuduo2 user.info kernel: bcmgenet bcmgenet.0 eth0: link up, 1000 Mbps, full duplex
      Aug 11 11:08:53 vuduo2 user.info kernel: NET: Registered protocol family 10
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Found user 'avahi' (UID 998) and group 'avahi' (GID 997).
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Successfully dropped root privileges.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: avahi-daemon 0.6.31 starting up.
      Aug 11 11:08:53 vuduo2 daemon.warn avahi-daemon[574]: WARNING: No NSS support for mDNS detected, consider installing nss-mdns!
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Successfully called chroot().
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Successfully dropped remaining capabilities.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Loading service file /services/sftp-ssh.service.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Loading service file /services/ssh.service.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.178.31.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: New relevant interface eth0.IPv4 for mDNS.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Network interface enumeration completed.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Registering new address record for fe80::21d:ecff:fe09:a2a2 on eth0.*.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Registering new address record for 192.168.178.31 on eth0.IPv4.
      Aug 11 11:08:53 vuduo2 daemon.info avahi-daemon[574]: Registering HINFO record with values 'MIPS'/'LINUX'.
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_STOP 0 1
      Aug 11 11:08:53 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0
      Aug 11 11:08:53 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Aug 11 11:08:54 vuduo2 user.err kernel: [SC]: !!!unknown cmd 0x5407
      Aug 11 11:08:54 vuduo2 daemon.info avahi-daemon[574]: Server startup complete. Host name is vuduo2.local. Local service cookie is 2071361254.
      Aug 11 11:08:55 vuduo2 daemon.info avahi-daemon[574]: Service "vuduo2" (/services/ssh.service) successfully established.
      Aug 11 11:08:55 vuduo2 daemon.info avahi-daemon[574]: Service "vuduo2" (/services/sftp-ssh.service) successfully established.
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_SET_STREAMTYPE 0
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 1 0
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_PLAY 1 2 0
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_CONTINUE 1 1
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_CLEAR_BUFFER 1 1 0
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_STOP 0 1
      Aug 11 11:08:55 vuduo2 user.warn kernel: [VID]: VIDEO_SELECT_SOURCE 0 0

      Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von hgdo ()

    • Neu

      So was hatte ich auch schon mal.
      Wenn das Signal des Startkanals so schwach ist das er nichts darstellen kann dann bleibt das bootlogo stehen.

      Schalte dann einfach auf einen andern Kanal, einen mit starkem Signal.
      Wenn es dann geht dann war es das.
    • Neu

      Na ja, du schreibst aber das du mit telnet auf die Box zugreifen kannst, also läuft sie doch.
      Probiers doch einfach mal mit dem Umschalten auf einen anderen Kanal.
      Probieren geht über studieren.