Suchergebnisse

Suchergebnisse 1-8 von insgesamt 8.

Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen

  • Hi! If possible, I would like to ask you permanently add my multiswitch to unicable.xml. Currently, I have to add it back to unicable.xml after every update. Thank you in advance. <product name="IDLU-UWT110-CUO10-32P" format="JESS" positions="4" bootuptime="2500" scr1 ="1210" scr2 ="1420" scr3 ="1680" scr4 ="2040" scr5 ="984" scr6 ="1020" scr7 ="1056" scr8 ="1092" scr9 ="1128" scr10="1164" scr11="1256" scr12="1292" scr13="1328" scr14="1364" scr15="1458" scr16="1494" scr17="1530" scr18="1566" scr…

  • It seems like the unicable.xml file is changed back to positions="2" when an update is installed. Please make positions="4" default for my multiswitch, so that I don't have to manually edit the file and reconfigure my tuners with every update. Cheers! Skickat från min SM-G930F via Tapatalk

  • If I change to positions = "2", it stops working. When I put "4" back, it starts working again.

  • Amazing! I removed the terminators and switched places between LNB A and C, and everything started to work! Then I put the cables back in the original configuration: Input A: Hotbird 13.0 E Input B: Astra 19.2 E Input C: Eutelsat 5.0 W Input D: [nothing] ...and everything was still working! The terminators must have been the culprit -- I never could have thought of it myself, reinstalling images and editing settings files. It does make sense to have positions="4" in the unicable.xml file, so I d…

  • I changed the settings according to hanswurst1997's suggestion, and stopped enigma before doing so. I used the modified unicable.xml supplied in an earlier post, and set up a dummy satellite (0.8W) as LNB 4. I also changed to the latest VTI image from September 4. No luck though. I also don't know the purpose of the fourth line that Clemens mentioned. Hopefully we eliminated this possible error when editing the settings file manually, as suggested by hanswurst1977. As for the numbers of the sate…

  • Thanks again for your replies. Hanswurst1977, I had already edited my unicable.xml file and changed positions from 2 to 4. I tried it with your file, too, just to be sure. I'm afraid it's still not working. Clemens, unfortunately I do not have another STB to try with. The possibility of a malprogrammed multiswitch number 2 (=for sats C+D) has stricken me. I just wanted to rule out other errors. I have also tried other images such as OpenPli, OpenVix and Black hole. In some of these, it is possib…

  • Thank you, goberlei, but I have already consulted the tuner settings section in the wiki (Tunerkonfiguration Vu+ Uno 4K SE mit einem DVB-S2(X) FBC Dual Tuner – Vu+ WIKI). It only mentions JESS setup for up to 2 LNBs. I suppose it would be the same for 3 LNBs (same frequency for all LNBs on one tuner), but although satellite A and B on the first multiswitch work, satellite C at the second multiswitch does not. Does anyone have any hints?

  • Hi! I wonder if anyone knows how to configure this properly. I have a set of two Inverto multiswitches (IDLU-UWT110-CUO10-32P) programmed for satellites A+B and C+D respectively. I use the unicable output on both switches, connected to the enclosed combiner. All my LNBs are Inverto IDLP-WDB01-OOPRO-OPP. 598d6d33eb070-1502440755.png I use 2 LNBs connected to inputs A and B on multiswitch number 1, and 1 LNB connected to input C on multiswitch number 2. However, my box cannot find anything connect…