Suchergebnisse

I was able to configure the outputs 3 and 4. You have just to connect your programmer to the output 3 or 4. From Inverto: "The multiswitch has two output pairs. This means that there is a chipset behind port 1 & 2 and 3 & 4. Accordingly, you must connect your Unicable II programmer or SatPal controller to the pair to be programmed."

Which value for the Digital Gain Settings did you use to display the outputs 3 & 4?

I have another issue with the IDLU-UST110-CUO4O-32P Unicable multiswitch. It's working great except the output 3 of the switch. The ouputs 1 & 2 are blinking green (unicable mode) but the output 3 is solid green (legacy mode) and doesn't want to switch to the unicable mode. I tried to connect the STB number 3 to the output 1 or 2 and it worked. So the issue is not due to my STB number 3 or my cables. Do you have any idea why the output 3 doesn't want to blink? Same issue with the output 4.

Hi guys, I'm trying to configure my IDLU-UST110-CUO4O-32P multiswitch using Unicable 2 programmer but I have an issue. I'm not able to configure the outputs 3 and 4. I can only configure the outputs 1 and 2. Can you help me?

Hi guys. I need your help. I have the IDLU-UST110-CUO4O-32P Unicable multiswitch and it's connected to 3 unicable STBs (2 Duo4K & and 1 Solo4K). It's working great except the output 3 of the switch. The ouputs 1 & 2 are blinking green (unicable mode) but the output 3 is solid green (legacy mode) and doesn't want to switch to the unicable mode. I tried to connect the STB number 3 to the output 1 or 2 and it worked. So the issue is not due to my STB number 3 or my cables. Do you have any idea why …

The new Vu+ Duo4k drivers have been implemented in the VTI software. The audio noise problem should be fixed.

I think this issue has just been resolved today. Vu + released a new version for the Duo 4k driver Openvuplus_3.0 We have to wait now until the VTI guys implement this new driver in the VTI software.

I have the same problem. When I watch a DVB-T channel if I change the DVB-T channel then there is sound but no picture. With FCC (Fast Channel Change) disabled all is working great. Please find attached a debug log of this issue. In the debug log you can see that there is an issue with FCC_DECODER_START that fails. The problem comes from this file: decoder.cpp Can anyone confirm that there is a problem with FCC_DECODER_START? Is a code fix by vuplus my only hope?

If you want your sound issue solved, just send an email to info@satco-europe.de. They will forward your issue to the programmers. The more we are to report the bug, the more likely it is that VU + will fix this bug. Wenn Sie Ihr Soundproblem lösen möchten, senden Sie einfach eine E-Mail an info@satco-europe.de. Je öfter wir den Fehler melden, desto wahrscheinlicher ist es, dass VU + diesen Fehler behebt.

Hi guys, I have an issue with FCC on my 2 Duo 4K boxes. So my problem is: When I watch a DVB-T channel if I change the DVB-T channel then there is sound but no picture. With FCC (Fast Channel Change) disabled all is working great. Please find attached a debug log of this issue. In the debug log you can see that there is an issue with FCC_DECODER_START that fails. The problem comes from this file: decoder.cpp Can anyone confirm that there is a problem with FCC_DECODER_START? Is a code fix by vupl…

Hi, Can you all send an email to info@satco-europe.de for this issue? Satco-europe GmbH is the distributor of VU+ products in Europe. They respond very quickly to emails and forward issues to the developers. The more we are to report the bug, the more likely it is that VU+ will fix this bug.

Hi, You can send an email to info@satco-europe.de for this issue. Satco-europe GmbH is the distributor of VU + products in Europe. They respond very quickly to emails and forward issues to the developers.

Can you use the bug report form at vuplus.com? Vu + The more we are to report the bug, the more likely it is that vuplus will fix this bug.

You're lucky to get an answer. I sent 10 emails at least to support@vuplus.com and never got any answer.

Can you use the bug report form at vuplus.com? Vu+ The more we are to report the bug, the more likely it is that vupus will fix this bug.

Hi, 2 videos attached: 1 with FCC and 1 without FCC.

Zitat von backfisch2018: „Ich hatte gestern das Problem bei ARD (Tatort) hatte allerdings Timeshift an, der Ton hat sich angehört wie eine Schallplatte die langsamer läuft bzw so hänger hat. Bis dato hatte ich das noch bei keinem anderen Sender. Hatte dann mal Timeshift beendet und dann war es kurz gut. Nach ca. weiteren 20 Minuten ohne Timeshift war auf einmal der Ton Total blechern für ca. 1 Minute, wie von Geisterhand war dann bis zum Ende alles OK. Tonverbesserer (Verschlechterer) alles aus,…

Thanks!

Zitat von Knifte: „But the discussion here is senseless. If it is a bug in the drivers the VTi Team has nothing to do with it. And this is not a forum of voices but it is a VTi forum. “ Ok so I won't disturb anyone anymore in this forum because my issue is a bug in the vuplus drivers. Just a last request: what is the best way to report a bug to vuplus and get it fixed? And sorry for bothering you.

Ok so I'm going to send a new email to support@vuplus.com but with no hope for an answer. Is sending an email to support@vuplus.com the best way to report a bug to vuplus? Is there somebody in this forum with a Duo 4K and a MTSIF Dual DVB-T2 tuner? I don't think I'm the only one having an issue with FCC and the MTSIF Dual DVB-T2 tuner.