Suchergebnisse

Hello, Since the end of October, I have no EPG updated on my VU+Zero, I tried to update the rytec.sources.xml with the file below, but it doesn't' work, it show me the sources in Epgimport and it download 4900 events but no EPG for the channels I am watching (Bis.TV) I have also retrieved rytec sources for CROSSEPG Rytec-sources for Crossepg.zip, but I don't know how to update Crossepg sources ... Any help would be appreciated Thanks Ced Quellcode (896 Zeilen)

Really ? Is my old dear VTI 9 skin the A-Tile skin ? I will try it, i have downloaded it while trying different skins to see if one fit my needs... Than you, you were right, really, thank you, i hate those new skins, Graphic design is my job since 20 years now, and they are very very bad created (bad design, bad concept, bad colors, not useful, they worst a 4/20), no offense VUplus, it is my job to make beautiful things (and practical to use)

I would like to re-install this skin, but i can't find it in the skin list (or in the skin download) on VTI 11.02 Any help please ?

Hello, I use the VTI standard skin since my first Vu+Solo (1st release), and i don't like the new default skins in VTI 11 on my VuZero... Where can i found that old skin which was perfectly fitted for my needs, and for my graphic taste (i am graphic designer, and the new skins are a mess)... Is the old skin from VTI 9.xx compatible with VTI 11 ? and is it possible to install it and replace the default VTI 11.xx skin (i didn't recognize the VTI Image) i use since a lot of years, its name was (if …

Two weeks and still no answers ? Nobody have the same problem with vu+zéro and latest VTI image? If I am correct, i don't had this problem with my vu plus solo and Vti...

Hello I have a sound problem with my new Vu+Zero... Sometime, I am watching a channel, and after some time the sound disappear, the image is ok, but with no sound... Other time, when I zap on a channel (syfy for example), there is no sound, to fix it I need to zap on another channel, then zap again to syfy to have the sound... This is very problematic, because some time when I program a recording, and I am doing other thing, I found the movie recorded without sound... Any help please ? Thanks in…

In fact i do not know what is the emu reader, I never used it, usually the only problem I have with it is to find how to disable it... I don't need it but it is provided by default into scam version I download from VTI cam center....

Not only, on my Vu+solo the hdmi connector stopped to work alone after some years, and without any act of violence (it is a female connector, impossible to touch it by mistake), the only possibility I have now to watch tv on the Vu+solo is to use the component connectors... Envoyé de mon iPad en utilisant Tapatalk

Thank you Chris, I think i got it, with Toneburst setting... Firstly i tried with : Disecq Validated command AA, but with no result, then i tried with LNB1, Disecq 1.0, and Toneburst A for Astra, and Lnb 2, Disecq 1.2, Toneburst B for 5°west, and Lnb3,Disecq 1.2, Toneburst B for Hotbed 13°est ... And now, i can watch Astra and 5°West perfectly (with my 1.40m) and another sat simultaneously with the 2nd dish, but i can also move the 2nd dish from a satellite to another ... Now, i think i just nee…

Thankyou, I will try this tomorrow, when the technician will be here ..

Hello, Fistly i had an motorized 1.40 meters, with positioned linked to the Vu+Zero/VU+Solo... Everything was working perfectly in a perfect world until my motor was deadly wounded (by time, and weather):) So i decided to fix the 1.40 antenna, and to add a new 1.10m motorized antenna to my Vu+Zero I know how to configure 2 fixed antennas, or 1 motorized antenna on a vu+ (Simple config : Disecq A/B), but how do we configure an mixed config with one motorized dish + one fixed dish.. If possible, i…

Thankyou, but that is for the Solo... I am searching about the Vu+Zero, but i have read somewhere the VU+Zero is not cloned, because of the very cheap price...

Hello, I just bought yesterday a Vu+Zero, On Vuplus.com in the Vu+Zero specifications, they say Vu+Zero should have : Ram : 512 Flash : 256 But mine have only 315 Mo ram ... root@vuzero:~# df -h Filesystem Size Used Available Used Mounted on ubi0:rootfs 193.0M 106.5M 86.5M 55% / devtmpfs 153.9M 0 153.9M 0% /dev tmpfs 154.0M 280.0K 153.7M 0% /run tmpfs 154.0M 80.0K 153.9M 0% /var/volatile /dev/sda1 931.1G 529.6G 392.1G 57% /media/hdd I told the seller i will check if it is a clone and i will retu…

So that is very strange, another user on another forum told me to disable Oscam Emulator (it is activated but unused on my VuSolo), and now the BisTV card have been detected ... I do not understand, because on my Vusolo, the emulator is active by default, and time to time i have to disable it... But it have never caused me problem with my BisTV cards... Ced Here is the new log : (Versteckter Text)

Hello, i just received a new Vu+Zero to replace my old Vu+Solo, and i have duplicated the settings which was in my VU+solo on the Vu+Zero. The problem is the VU+zero don't recognize my Bis TV local card... Any idea please ? First thing : about the side we insert the local card, is it like the vu+Solo (chip on the down side)? Here are my oscam.conf bis local card setting : ## In Oscam.server file : [reader] label = bis protocol = internal device = /dev/sci0 caid = 0500 detect = cd mhz = 450 cardm…

No, i haven't found any fix... The only way to have a stable config, is to use Oscam (without cccam)...

I'm not sure about why it is hot... It have been always at the same place (in a cabinet, but with space around it)... If i am correct, last year it wasn't so hot... If i place my hand on it, i can sense it, not as hot as my DM800, but not cold ... May be, the new VTI images make the Vu components work harder than the old one, or may be she start getting old...

Perfect, it work ... Firstly i have tried with RCA cable, on Vusolo AV output, and it have worked correctly... But the OSD with the default HD skin wasn't rendering correctly... The TV images was correct... Then, i have connected the same RCA Cable to Vusolo YPBR output, and the image was better... HD is rendering correcly... I hope it will work for long time... But about my HDMI problem, i have notified this problem occur when the Vu+ is hot... At boot, or when i re-install VTI on it, the hdmi …

Are the Component and HDMI output separated on the VuSolo Motherboard ? I mean, could this HDMI problem be avoided if i connect the VuSolo to my TV with a Component Cable (5 cables) or may be a Composite (3 cables) ?

Hello, Thankyou for your answer... I have tried with 2 others HDMI cables and same problem... I also have tried another HDMI input on my TV, without any change... It is very strange, because hdmi signal appear and disappear... and when i turn on the vusolo, i have a black screen for some minutes, and then the signal appear... Also when i re-installed the VTI Image (2 times), HDMI signal have worked perfectly for some time...