Suchergebnisse

Zitat von mimisiku: „That's the main problem with eMMC. Cheap to produce, large memory but no ECC correction function. If it goes bad, your goose is coocked! Hopefully still under waranty... “ afraid not, 4 years in january :-/ Zitat von hgdo: „There is no solution if the the flash memory is damaged. The mainboard has to be replaced. “ thanks, bugger.

Thats what i suspect too. i hope someone have a solution. :-/ Zitat von RickX: „No, you can't boot from any other device, Try do re-install the Vu+ image from USB stick. “ Yes, ive already tried that. the result can be seen in the attached file in my first post. :-/

hi forum, i have a Vu uno 4k, that never gets a picture on screen when beeing turned on. ive hooked the box up to a serial port and i get this output: (on power up) (Versteckter Text) and then nothing more happens. if i try with a USB update.. the following happens: See attached txt file. it seems that my internal "disk" is somehow corrupt, any idea to get this box up and running again? can i run a boot disk on an external usb? and ignore the internal "disk" thanks for any comments.

Sorry it was a uno 4k i had.. fcc was working on that one.. same setup on my new duo 4k, and now it is not working.

Got me self a duo 4k recently, upgrading from a zero 4k. i have a FBC setup, dvb-s, same as on my zero 4k, and i cant get fcc to work. Streaming from different tuners working fine, but Fast Channel Change is not working, ive set it up, the same way as i did on my Zero 4k, did i miss a thing ? and is it working for any one else?

i was linked here from index.php?title=Schneller_Kanalwechsel_(FCC). add your own ) for the link to work.. it was a link from your wiki.. on the wiki the duo 4k is not mentioned. maybe the plugin needs to be updated to support duo 4k?? btw, on the wiki it say this is the support thread for fcc, and more tuners than the Solo 4k is mentioned.

hi, sorry for english, german is not my native tongue.. got a duo4k, and fcc is not working, got a unicable setup, same setup was working on my uno4k. latest vti. did i miss anything?

Hi all i just set up my vu+ uno 4k to my samsung tv, and when i press the menu button i was hoping to get the menu of the vu+, but instead i get the menu of the samsung tv. all other functions works just fine hope any1 have a solution.

This worked, thank you very much for your guidance, it i much appeciated. thanks.

thanks, i will try this setup and report back and yes i have two Inverto Black Unicable Quad IDLP-QUDL42-UNI2L-1PP connected, one on each dish.

i am not sure i understand how i should set it up, i have done the following CH1 1210MHz (EN50494+EN50607) CH2 1420MHz (EN50494+EN50607) CH3 1680MHz (EN50494+EN50607) CH4 2040MHz (EN50494+EN50607) 'above on Tuner a, i can only wath one transponderand i get nothing on Tuner B ive tried with some different settings, but i am lost in the configuration possibilities. should i try: Tuner A CH1 1210MHz (EN50494+EN50607) CH2 1420MHz (EN50494+EN50607) CH3 1680MHz (EN50494+EN50607) CH4 2040MHz (EN50494+E…

Hello all forgive my lack of knowledge i have the following: 1 VU solo 4k with 2 FBC tuners Tuner A goes with a single cable directly connected to unicable LNB on 1W Tuner B goes with a single cable directly connected to unicable LNB on 5E what should be the most correct settings in tunersetup on my VTI newest image, to get the possibilities to tune on more than one transponder? thanks //affer Denmark

hay all. is there a way to get info on which tuner is in use atm, or maybe even a way to try to switch to another tuner. i have 2 motorized selfsat dish and a sundtek usb dvb-s, recepetion is different on all of them. so i would like to manual switch to best reception. //thanks

Okay, i got it sorted out, by defining which dvb-s tuners that can scan wich sattelites.. new question, if am i watching a channel from 1w on sat tuner a, and i know there is bette reception on sat tuner b, is there an easy way to toggle ?

Hello Forum i have a setup with a VU Solo2 nad 2 x USALS dish. tuner a cant reach 28e, but tuner b can, is there a way to setup priority or known sat positions to each tuner ? even if i delete all channels and only scan 28e on tuner b, tuner a is still trying to reach channels on 28e and vice versa. thx