Suchergebnisse

Done that (naturally), learned nothing...

Hi all, I have problem with Vu+ Solo 4K + 2TB Seagate 7200rpm 2,5" drive, brand new, came preconfigured from profesionals from store (they sell many of those boxes) with installed VTI 11, picons, OSCAM configured for Skylink Irdeto cards, 2 Skylink ICE cards (one for Slovak channels and one for Czech channels). Both cards are in UNI reader, in previous Vu+ Duo this was working just fine, but I had CCAM there. Now with Solo 4K after almost every channel change I get indicator for some loading in …

bei mir findet VTI 11 nur 18 aus 2600 sender und dass auch SEHR langsam, dauert 1 Stunde. Also ich wohne in der Slovakei, unsere sprache ist nicht benutzbar in VTI 11, fehlen ľ,š,č,ť,ž.

Mein Deutch ist nicht so gut, aber ich muss dazu was sagen. Die AzBox (HD Premium) hatte ich seit 2 Jahren, aber ich bin sehr glucklich dass ich sie verkauft habe, es war ein gigantishes fail. MKV filme waren fast alle nicht abspielbar, kein funktionierendes EPG, usw. Nein, Vu+ Duo ist im gegensatch zu Azbox ein wunder. Und kein DTS downmix im Vu+? Damit kann ich leben. Vielleicht wirt es einmal moglich sein, aber die losung von webbel ist ganz gut finde ich.

I am enigma user for some 3 days, so... I have inserted my cards into card reader and now I can record one channel and watch another perfectly. Many thanks tonskidutch, you helped much!

OK so I understand I cannot use my CI module the way I thought and I need to insert my both cards to Card reader of the receiver. No other way. Is that correct?

yes, I have one CI module inserted in Slot 1 of the Common interface. I have used it in my previous receiver, so yes, the cards are inserted correctly. In card slots of the receiver is nothing inserted. The CI module is twin (for 2 cards). I use two decoding cards (Skylink and CS Link), both in that one CI module. I can insert them into card slots if needed, but I would prefer to use my current setup.

Entitlements shows this: card reader /dev/sci0 no or unknown card inserted card reader /dev/sci1 no or unknown card inserted I have both my cards inserted in Common Interface slot 1...

I have installed CCcam 2.2.1, but still no luck, after start recording, other channels on astra 23,5 show only black screen, but only on coded channels, free channels work ok. Should I configure it somehow?

i have only standard VTI image installed, nothing more. Is there something I am missing? Should I install something else for paytv channels - cccam? Is that cardsharing - one card for two tuners? I am new to this and perhaps I shoud install something I dont know about now.

Didnt help at all, now I get all channels from tuner B and when recording, still get black screen from tuner A. I wonder, why I do not get all channels from tuner A and then when recording it doesnt change to tuner B... Also, at automatic search, it asked me only of tuner A, not both as before the cable exchange. I will change cables back, as it serves me bether that way.

Hi! Diseqc is brand new, I had one that was bad for sure, didnt work properly on my previous receiver too, now its replaced - Gold Interstar 4-1 Diseqc (I only use ports 1 and 2). And, I have satfinder plugin installed and everything is OK, just like the other tuner pluged directly to LNB. But I will try and disconnect that other cable... Edit: when I disconnect cable from tuner A, I get only black screen on all Astra 23,5 channels. Astra 19 is OK. When I set in box tuner A as not configured, I …

I have Vu+ duo Tuner A is configured for Astra 23,5, Tuner B with Diseqc A/B/C/D for A: Astra 23,5, B: Astra 19, C/D not configured. I have two LNBs on the dish, one twin LNB for Astra 23,5, one single LNB for Astra 19. One cable from twin LNB leads directly to tuner A, second leads to diseqc port 1 and on port 2 there is Astra 19 from single LNB. Done automatic scan, it found more than 2000 stations. Now I use decoding cards for slovak and czech programs - Skylink and CS Link. When I start reco…

I have this problem too I just bought my receiver few days ago and thought its some tuner problem, but as I have everything configured OK, i think it has to be software related... I have VTI 2.2 image installed...