@hannesmau
Die Firmware ist aktuell (7.5). Ich muß jedesmal den Dienst auf der Duo starten. Das erledigt das Plugin irgendwie nicht. Wenn es einmal abstürzt (und richtig stabil ist es auch nicht) Muß ich die Box einmal komplett starten um den Dienst wieder fehlerfrei starten zu können. Auch ist die Config-File Erstellung im Plugin nicht so der Hammer. Irgendwie übernimmt der Config-File einiges nicht, und einiges ist nicht konform.
Mein boblight.conf:
#[global]
#interface 127.0.0.1
#port 19333
[device]
name ambilight
type lightpack
channels 30
interval 20000
serial 5437231893F351C11700
rate 57600
#debug off
[color]
name red
rgb FF0000
gamma 0.91
adjust 1.0
blacklevel 0.0
[color]
name green
rgb 00FF00
gamma 0.86
adjust 0.96
blacklevel 0.0
[color]
name blue
rgb 0000FF
gamma 0.95
adjust 0.80
blacklevel 0.0
[light] #bottom-right
name 1XX
color red ambilight 1
color green ambilight 2
color blue ambilight 3
hscan 50.0 100.0
vscan 0.0 100
[light] #right
name 2XX
color red ambilight 4
color green ambilight 5
color blue ambilight 6
hscan 0.0 100
vscan 50.0 100.0
[light] #right
name 3XX
color red ambilight 7
color green ambilight 8
color blue ambilight 9
hscan 0.0 100
vscan 0.0 50.0
[light] #top
name 4XX
color red ambilight 10
color green ambilight 11
color blue ambilight 12
hscan 75.0 100.0
vscan 0 100
[light] #top
name 5XX
color red ambilight 13
color green ambilight 14
color blue ambilight 15
hscan 50.0 75.0
vscan 0 100
[light] #top
name 6XX
color red ambilight 16
color green ambilight 17
color blue ambilight 18
hscan 25.0 50.0
vscan 0 100
[light] #top
name 7XX
color red ambilight 19
color green ambilight 20
color blue ambilight 21
hscan 0.0 25.0
vscan 0 100
[light] #left
name 8XX
color red ambilight 22
color green ambilight 23
color blue ambilight 24
hscan 0 100
vscan 0.0 50.0
[light] #left
name 9XX
color red ambilight 25
color green ambilight 26
color blue ambilight 27
hscan 0 100
vscan 50.0 100.0
[light] #bottom-left
name 10X
color red ambilight 28
color green ambilight 29
color blue ambilight 30
hscan 0.0 50.0
vscan 0.0 100
Damit läuft es erstmal. Allerdings ist es bei mir zu hell als das ich irgendwas vergleichen könnte. Ich weiss das die Reihenfolge der LEDs nicht stimmt. Aber da habe ich keine Lust mehr drauf, warte bis es dunkel ist. Es wird farbig, das war mein erstes Ziel...
Gruß Damage
Die Firmware ist aktuell (7.5). Ich muß jedesmal den Dienst auf der Duo starten. Das erledigt das Plugin irgendwie nicht. Wenn es einmal abstürzt (und richtig stabil ist es auch nicht) Muß ich die Box einmal komplett starten um den Dienst wieder fehlerfrei starten zu können. Auch ist die Config-File Erstellung im Plugin nicht so der Hammer. Irgendwie übernimmt der Config-File einiges nicht, und einiges ist nicht konform.
Mein boblight.conf:
#[global]
#interface 127.0.0.1
#port 19333
[device]
name ambilight
type lightpack
channels 30
interval 20000
serial 5437231893F351C11700
rate 57600
#debug off
[color]
name red
rgb FF0000
gamma 0.91
adjust 1.0
blacklevel 0.0
[color]
name green
rgb 00FF00
gamma 0.86
adjust 0.96
blacklevel 0.0
[color]
name blue
rgb 0000FF
gamma 0.95
adjust 0.80
blacklevel 0.0
[light] #bottom-right
name 1XX
color red ambilight 1
color green ambilight 2
color blue ambilight 3
hscan 50.0 100.0
vscan 0.0 100
[light] #right
name 2XX
color red ambilight 4
color green ambilight 5
color blue ambilight 6
hscan 0.0 100
vscan 50.0 100.0
[light] #right
name 3XX
color red ambilight 7
color green ambilight 8
color blue ambilight 9
hscan 0.0 100
vscan 0.0 50.0
[light] #top
name 4XX
color red ambilight 10
color green ambilight 11
color blue ambilight 12
hscan 75.0 100.0
vscan 0 100
[light] #top
name 5XX
color red ambilight 13
color green ambilight 14
color blue ambilight 15
hscan 50.0 75.0
vscan 0 100
[light] #top
name 6XX
color red ambilight 16
color green ambilight 17
color blue ambilight 18
hscan 25.0 50.0
vscan 0 100
[light] #top
name 7XX
color red ambilight 19
color green ambilight 20
color blue ambilight 21
hscan 0.0 25.0
vscan 0 100
[light] #left
name 8XX
color red ambilight 22
color green ambilight 23
color blue ambilight 24
hscan 0 100
vscan 0.0 50.0
[light] #left
name 9XX
color red ambilight 25
color green ambilight 26
color blue ambilight 27
hscan 0 100
vscan 50.0 100.0
[light] #bottom-left
name 10X
color red ambilight 28
color green ambilight 29
color blue ambilight 30
hscan 0.0 50.0
vscan 0.0 100
Damit läuft es erstmal. Allerdings ist es bei mir zu hell als das ich irgendwas vergleichen könnte. Ich weiss das die Reihenfolge der LEDs nicht stimmt. Aber da habe ich keine Lust mehr drauf, warte bis es dunkel ist. Es wird farbig, das war mein erstes Ziel...
Gruß Damage
-------------------------
Der Letzte macht das Netz aus !
Der Letzte macht das Netz aus !