Angepinnt Boblight: (Support-Thread) Plugin für ambientes Licht
Diese Seite verwendet Cookies. Durch die Nutzung unserer Seite erklären Sie sich damit einverstanden, dass wir Cookies setzen. Weitere Informationen
-
-
Danke habe ich so probiert, hat leider auch nicht geklappt. Ich hatte mit meiner uno aber auch beim Installieren der neuesten boblight version gar keine Probleme, es lief so durch.
Merkwürdig ist halt nur dass das Gerät am Mac und Windows Rechner geht, hier aber anscheinend gar nicht erst erkannt wird -
Er findet ein /dev/usb/hiddev0
Kann es das sein?
passiert leider nur trotzdem nix -
Hab jetzt auf die schnelle auch nur den User @elbmic gefunden der die Hardware besitzt.
kannst ja mal ab Beitrag 688
mitlesen. bei dem gehts wohl...-------------------------------------------------------------------
"sei der Schläger!!!, sei der Schläger!!! ...
Arthur Spooner
-------------------------------------------------------------------
Astra 19.2° / 13.0° -
Ich habe ihm mal geschrieben aber ich glaube er hat nicht 1:1 das selbe gerät sondern so ein selbst gebasteltes
-
-
Hallo
Das Lightpack funktioniert 1a
nimm die aktuellste Version : 0.7r7 Beta
erstelle eine datei unter /etc/udev/rules.d
mit dem name : 93-lightpack.rules
mit folgenden inhalt
dann die config nach " /etc/boblight.conf "
mit folgenden inhalt :
Quellcode
- #[global]
- #interface 127.0.0.1
- #port 19333
- [device]
- name ambilight
- output /dev/hiddev0
- type lightpack
- interval 20000
- channels 30
- debug off
- [color]
- name red
- rgb FF0000
- gamma 0.91
- adjust 1.0
- blacklevel 0.0
- [color]
- name green
- rgb 00FF00
- gamma 0.86
- adjust 0.96
- blacklevel 0.0
- [color]
- name blue
- rgb 0000FF
- gamma 0.95
- adjust 0.80
- blacklevel 0.0
- [light] #top
- name 1XX
- color red ambilight 1
- color green ambilight 2
- color blue ambilight 3
- hscan 75.0 100.0
- vscan 0 10
- [light] #top
- name 2XX
- color red ambilight 4
- color green ambilight 5
- color blue ambilight 6
- hscan 50.0 75.0
- vscan 0 10
- [light] #top
- name 3XX
- color red ambilight 7
- color green ambilight 8
- color blue ambilight 9
- hscan 25.0 50.0
- vscan 0 10
- [light] #top
- name 4XX
- color red ambilight 10
- color green ambilight 11
- color blue ambilight 12
- hscan 0.0 25.0
- vscan 0 10
- [light] #left
- name 5XX
- color red ambilight 13
- color green ambilight 14
- color blue ambilight 15
- hscan 0 10
- vscan 0.0 50.0
- [light] #left
- name 6XX
- color red ambilight 16
- color green ambilight 17
- color blue ambilight 18
- hscan 0 10
- vscan 50.0 100.0
- [light] #bottom-left
- name 7XX
- color red ambilight 19
- color green ambilight 20
- color blue ambilight 21
- hscan 0.0 25.0
- vscan 90.0 100
- [light] #bottom-right
- name 8XX
- color red ambilight 22
- color green ambilight 23
- color blue ambilight 24
- hscan 75.0 100.0
- vscan 90.0 100
- [light] #right
- name 9XX
- color red ambilight 25
- color green ambilight 26
- color blue ambilight 27
- hscan 90.0 100
- vscan 50.0 100.0
- [light] #right
- name 10X
- color red ambilight 28
- color green ambilight 29
- color blue ambilight 30
- hscan 90.0 100
- vscan 0.0 50.0
danach box ausschalten / anschalten
gehe in die erweiterungen auf boblight
gelbe taste Boblight restart
dann sollte es 1a funktionieren
gruß
BraiNi -
Ich habe es zum Laufen bekommen mit einer neueren Version, die noch in der Entwicklung steckt. Der Entwickler spricht dort das lightpack mit der Serial an und nicht mit /dev/hiddev0. Gibt es einen Trick wie ich die LEDS richtig anordnen kann? Muss ich da dann einfach die Ambilight Nummern tauschen?
-
brain666 schrieb:
Hallo
Das Lightpack funktioniert 1a
nimm die aktuellste Version : 0.7r7 Beta
erstelle eine datei unter /etc/udev/rules.d
mit dem name : 93-lightpack.rules
mit folgenden inhalt
dann die config nach " /etc/boblight.conf "
mit folgenden inhalt :
Quellcode
- #[global]
- #interface 127.0.0.1
- #port 19333
- [device]
- name ambilight
- output /dev/hiddev0
- type lightpack
- interval 20000
- channels 30
- debug off
- [color]
- name red
- rgb FF0000
- gamma 0.91
- adjust 1.0
- blacklevel 0.0
- [color]
- name green
- rgb 00FF00
- gamma 0.86
- adjust 0.96
- blacklevel 0.0
- [color]
- name blue
- rgb 0000FF
- gamma 0.95
- adjust 0.80
- blacklevel 0.0
- [light] #top
- name 1XX
- color red ambilight 1
- color green ambilight 2
- color blue ambilight 3
- hscan 75.0 100.0
- vscan 0 10
- [light] #top
- name 2XX
- color red ambilight 4
- color green ambilight 5
- color blue ambilight 6
- hscan 50.0 75.0
- vscan 0 10
- [light] #top
- name 3XX
- color red ambilight 7
- color green ambilight 8
- color blue ambilight 9
- hscan 25.0 50.0
- vscan 0 10
- [light] #top
- name 4XX
- color red ambilight 10
- color green ambilight 11
- color blue ambilight 12
- hscan 0.0 25.0
- vscan 0 10
- [light] #left
- name 5XX
- color red ambilight 13
- color green ambilight 14
- color blue ambilight 15
- hscan 0 10
- vscan 0.0 50.0
- [light] #left
- name 6XX
- color red ambilight 16
- color green ambilight 17
- color blue ambilight 18
- hscan 0 10
- vscan 50.0 100.0
- [light] #bottom-left
- name 7XX
- color red ambilight 19
- color green ambilight 20
- color blue ambilight 21
- hscan 0.0 25.0
- vscan 90.0 100
- [light] #bottom-right
- name 8XX
- color red ambilight 22
- color green ambilight 23
- color blue ambilight 24
- hscan 75.0 100.0
- vscan 90.0 100
- [light] #right
- name 9XX
- color red ambilight 25
- color green ambilight 26
- color blue ambilight 27
- hscan 90.0 100
- vscan 50.0 100.0
- [light] #right
- name 10X
- color red ambilight 28
- color green ambilight 29
- color blue ambilight 30
- hscan 90.0 100
- vscan 0.0 50.0
danach box ausschalten / anschalten
gehe in die erweiterungen auf boblight
gelbe taste Boblight restart
dann sollte es 1a funktionieren
gruß
BraiNi -
Wenn du kein Lightpack hast nein, dann war es nur für mich
-
Hab ein atmolight das nicht geht....
-
shapethelola schrieb:
Wenn du kein Lightpack hast nein, dann war es nur für mich -
Ich habe bei Kickstarter das Projekt unterstützt und so eines der Geräte bekommen
-
was musstest da bezahlen?
-
Glaube 65
-
wow das ist billig aber ich versteh die Seite nicht...
-
Und was verstehst du daran bitte nicht
-
Hallo zusammen,
ich bekomme es leider auch nicht hin. Ich habe ein Lightpack Clone von ebay. Am PC läuft es einwandfrei.
An der VU Duo Kernel Modul drauf, 7.07 per temp installiert, Konfig erstellt (in etc überprüft) Lightpack dran, keine Reaktion. Alles noch mal deinstalliert, alles neu gemacht und die Conf und 93-lightpack per TotalCommander geändert. Neustart der Box, Neustart per gelbe Taste, immer noch nichts.
Kann einer helfen oder funktioniert der Clone überhaupt nicht?
Nachtrag: Ich bekomme auch die Fehlermeldung:
no Lightpack device with vid 03eb and pid 204f found
@
shapethelola: Woher hast du denn die Version, du hattest anscheinend das gleiche Problem, dankeDieser Beitrag wurde bereits 1 mal editiert, zuletzt von Ensentro ()
-
Hallo,
ich will mein Samsung TV 4K 65Zoll F9090 mit Sedu - Lights veredeln. Ich habe die VU+ Duo2.
Was benötige ich dafür aus dem Sedu - Lights?
?-( ?-( ?-(
mfg -
Du musst natürlich noch ein Plug zum ansteuern der Hardware auf der Box installieren (Atmolight/Boblight)!